3 AXIS TC-100A Mini Air Compressor Instruction Manual
- June 13, 2024
- 3 AXIS
Table of Contents
3 AXIS TC-100A Mini Air Compressor
Product Information
The mini compressor is designed with a special non-oil type, that the transmission medium remains unpolluted. Its output fluid is steady, and it offers a pressure range of 0 to 25 PSI. This compressor is ideal for various applications such as airbrush makeup, airbrush nail art, spray flowers, cake decorating, and more. Its non-oil design allows for continuous use.
Specifications
- Design: Non-oil type
- Pressure Range: 0 to 25 PSI
- Output Voltage: 12V
- Output Current: 2A
Product Usage Instructions
- Assemble the airbrush, hose, and compressor together. Ensure that the compressor is in a steady position. The airbrush should be of the single-action type.
- Plug the AC cord into the compressor and connect the AC adapter to an electrical source. The adapter’s output voltage should be 12V, and the current should be 2A.
- Press the ON/OFF button to OPEN/CLOSE the compressor.
- If the working pressure is too large, rotate the ADJUSTER-VALVE to adjust it to the proper working pressure. The range is from 0 to 25 PSI.
Warning:
- The compressor should be placed in a dry, clean, and well-ventilated area.
- Keep the compressor out of reach of children and prevent them from playing with it.
- The ambient temperature for the compressor should be between 0-40°C. Avoid exposing it to direct sunlight.
- If the hose and airbrush are not assembled, do not let the compressor work for more than 30 minutes.
- When not in use, place the airbrush onto the holder to prevent it from getting damaged.
Spare Parts
Introduction
This mini compressor uses the special non-oil type design. Its non-oil promises the transmission medium not to be polluted. Its output fluid is steady and the range of pressure is from 0 to 25 PSI .It is very suitable to be used for airbrush makeup, airbrush nail, spray flowers. Cake decorating and etc because of its non-oil design and continuously work.
Specifications
How to use
- Assemble the airbrush, hose and compressor together and make sure compressor be put to the steady position. The airbrush should be single action type.
- Plug AC cord to the compressor the connect the AC adapter to the electrical source. The adapter’s output voltage is 12V and current is 2A.
- Press ON/OFF to OPEN/CLOSE the compressor.
- If the working-pressure is too large, please rotate the ADJUSTER-VALVE to get proper Working-pressure the range is from 0 to 25 psi.
Warning
- The compressor should be put in dry ,clean and ventilates place.
- Don’t let children contact and play.
- The compressor’s ambient temperature should be in 0-40 and don’t put in polarization.
- Don’t let the compressor work over 30 minutes if don’t assemble the hose and the airbrush.
- Please put the airbrush onto the holder when you don’t use it so that not broken.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>