JOYVOLT JV2000 Portable Outdoor Power Supply User Manual

JV2000 Portable Outdoor Power Supply
User Manual Operation Manual
Jv2000

JV2000 Portable Outdoor Power Supply

Please read this manual carefully before use
Keep it properly for reference
Thanks for choosing us
The operation manual is edited and published to provide the latest safety information as of the time of publication. The actual AC outlet, AC output voltage and frequency thereof canvary by country of region Before using, please read the operation manual carefully. Operate the product until you fully understand the manual, Onceyoustart using this product, you are deemed to have understood, recognized and accepted ll terms and contents: of this manual. Users shall agree to be responsible for actions andall consequences arising therefrom The company reserves the final right to interpret this document and all documents related to the product
Please follow the below safety instructions,otherwise it will Warning cause fire,electric shock,damage or other injuries.

Safety Guides

Instructions of Waste Electrical and Electronic Products Recycling Management Regulations
In order to better care for and protect the earth, users shall comply with related national laws and regulations on recycling waste electrical and electronic products and hand over waste electrical and electronic products to the local manufacturer with the nationally recognized recycling treatment qualification for recycling treatment when the products are no longer needed or can not be used. Otherwise, improper use or disposal thereof may influence the environment and human health

Safety Notes

Warning-When using the product, please obey the following basic precautions:

• Only qualified maintenance personnel of the company can carry out maintenance work
• Donot put your finger, palm or any part of your body into the product.
• If you use accessories not recommended, it may result in fire, electric shock or personal injury.
• Do not place this product near chemicals or the place where chemicals may leak. Do not disassemble the power supply by yourself when maintaining or repairing the product. Please hand over the mobile power supply to the qualified service provider of the company. If the power supply is disassembled by mistake, it may cause the fire or electric shock
• When the product s faulty, to reduce the risk of electric shock, remove the mobile power supply from the socket before performing any maintenance operations instructed.
• Charge the battery in a well-ventilated area to ensure air circulation in the air cooling system of the product
• Do not place heavy objects onto the product. As the product is heavy, it may fall off due to improper placement and cause injury to you or other persons or serious damage to the product.
• Do not expose the product to the environment with humidity, corrosive gas, ash layer, and open flame.
• Toreduce the risk of injury, keep close supervision when using this product near children.

Specification Parameters

Basic Parameters

Model:| JV2000|
---|---|---
Capacity:| 2116Wh 50.4V|
Size:| 365210281mm| L’W*H
Weight:| Approx. 17.6Kg| (Net weight of the whole product;

Input Parameters

Output Parameters

Max.)
Cigarette Lighter Output (–| 13.2Vdc 10A
Wireless Output (x2) –| I5W Max per port

Other Specifications

protection, over discharge protection, overload protection, short circuit protection, over-current protection, battery failure protection,etc.
Charging Temperature| 0-40°C (32°F-104°F)
Discharging Temperature:| -10-50°C (14°F-122°F)
Product Capacity Expansion| Support

Other Accessories

List of Accessories| A 2116Wh Host, AC Charging Cable, Charging Cable for Car- mounted Cigarette Lighter, Operation Manual and Maintenance Card
---|---

0perating Instruction of the Product

3.1 Overview of Outlook

3.2 Introduction of Display Screen

1.  Power: Current power.
2. Remaining charging and discharging time: Current remaining charging and discharging time.
3. Overload warning: Current overloading warning (flashing indicates overloading while normally on state indicates overload protection).
4. Load rate: Ration of current load and max. load.
5. Output power: Current output power.
6. Input power: Current input power.
7. USB-A connected: A device is connected to USB-A port.
8. Type-C connected: A device is connected to USB-C port.
9. Group series mode: Current state of group series mode.
10. Photovoltaic input: There is photovoltaic input (normally on state indicates photovoltaic input, while flashing indicates abnormal photovoltaic input).
11. inverting: When the inverting state is on (normally on state indicates that AC is normally operated while flashing indicates AC is operated abnormalty).
12. Error: There is an error (Once the icon appears, please record the error code at ‘2’ and contact with after-sales service personnel).
13. Over-temperature warning: Current over-temperature warning (flashing indicates over-temperature warning for charging while normally on state indicates over-temperature warning for discharging).
14. Low-temperature warning:Current low-temperature warning (flashing indicates low-temperature warning for charging while normally on state indicates low-temperature warning for discharging).
15. Fan: Current fan state (based on the rotation of wind speed. flashing indicates that fan is faulty).
16. AC output frequency and voltage: Current inverting frequency and inverting voltage.

*For error display and disposal, please refer to Chapter 4 for more information.
3.3 Operation of the Product

Power On, Power Off and Display Screen Lightened Up
‘Short press the main power switch for starting the whole machine. Then the display screen will be lightened and the breathing light for main power switch will be on.
If you do not operate the product in consecutive 5 minutes, it will enter sleep mode and the display screen will stay off automatically.
When there are key operation and warning for the product, the display screen will stay lightened.
By long pressing the main power switch, the product will be powered off.
The standby time of the product is 30 minutes by default. If other power switches are not turned on and no loads are.
connected to the product, the product will be powered off automatically 30 minutes later.

Logic and Function of DC Key
When the main power switchis turned on, USB-A, Type-C and cigarette lighter output ports can be started only by short pressing DC output power switch.
When DC output power switch is turned on, the system wil start the display screen by default displaying current power of the product and corresponding fixed symbol.
By short pressing DC output power switch again, DC port output can be closed.
Ifno power is output, DC output power switch will be off automatically after 5 minutes.
Logic and Function of AC Key
‘When the main power switch s turned on, AC output port can be started only by short pressing AC output power switch.
When AC output power switchis turned on, the systemwill start the display screen by defauit displaying current power of the product and corresponding fixed symbol.
By short pressing AC output power switch again, AC port output can be closed
3.4 Instruction for AC Charging

Fast charge technology is adopted in this product during AC charge wherein the max. input power can reach 1650W.
When the AC input current continues to be too high, the AC input overload protector key will pop up automatically. After confirming that there is no faults in this product, press AC input overload protector key for recharging
3.5 Instruction for Solar Charging

3.6 Instructions for Car Charger

Users can se the car charger to charge the product wherein it s in favor of 12V/24V car chargers and the charging current s 10A by default. Use the car charger to charge after the car is ignited and started. Otherwise, it may can cause that the car is under charge and can not be started. In addition, keep the cigarette lighter at the car-mounted cigarette lighter port and car- mounted charging cable for cigarette lighter in good contact. The company shall not assume any responsibility for damage caused from non-standard operation.
3.7 Basic UPS Function
Enable basic UPS mode:
Method 1: During AC charging, press the AC output power switch.
Method 2: Press the AC output power switch and then charge the device.
Disable basic UPS mode:
When basic UPS mode is on, press the AC output power switch.
3.8 Group String Connection
By group string connection, battery capacity can be expanded.
Enable/disable group string mode
Start: When the device is powered on, press and hold the DC output power switch until the prompt tone and the group string identifier appear. Then the group string mode s started
Disable: When the device is powered on, press and hold the DC output power switch untilthe prompt tone s heard and the group string identifier disappears. Then the group string mode is disabled Using group string mode

1. Turm on the group string mode for all devices to be stringed.
2. By group series connection, AC output port of one device is connected to the AC charging port of another device with AC charging cable
3. Turn on AC output power switch of each device after all devices are stringed.

Turn off group string mode:

1. Keepall devices n group string mode.
2. Press AC output power switch of the device at the rear and then turn off the AC output thereof.
3. Unplug the cable for connecting the device at the rear.
4. Repeat steps (2) and (3).

Group string connection can greatly reduce the maximum output power of the device. The more the devices to be stringed there.
are, the greater the maximum output power is reduced.

Error Display and Processing

automatically recovers when battery cools down
Icon flashing Icon normally on| Normally on state indicates discharging at low temperature Flashing state indicates charging at low temperature| It automatically recovers when battery temperature is normal
Icon flashing| Low battery power| It automatically recovers when the battery is fully charged
Icon flashing| Fan blockage| Restart the device
Icon flashing| Photovoltaic overload protection| 1.PIug and unplug photovoltaic overload protector
2.Restart the device
Icon flashing| Inverting fault| 1.Press AC output power switch 2.Restart the device
Icon flashing Sound alerting| OVERLOAD Output/inverting overload protection| Llower down the output power
2.Press the sound key to stop the sound alert. The flashing icon will not disappear.
3.The inverting overload protector can shut off the inverting output and then the error can be eliminated after 30s.
Icon flashing Error code appearing| Fault| Record the error code and then contact the after-sale personnel.

If an alarm occurs during the use of the product and the alarm icon does not disappear after restarting the machine, please stop using the product immediately (Do not try charging or discharging)

• If you can not solve your problem through the above information, please contact customer service personnel for consultation.

FAQ

1.How to use the product upon receiving?

There is approx. 25%-60% power when you receive the product. It is recommended to fully charge the product before using The product can be fully charged within 2 hours. Please use original charger, solar panel, car-mounted cable and company’s other products

2What kind of battery does this product use? How long is the battery service life?

This product is equipped with temary lithium battery. We calculate the service life thereof by times. It can still keep approx. 80% of effective capacity after 800-time cycle use.

3What kinds of devices can be connected to the interfaces of the product?

There are 7 DC output ports for connecting the mobile phone, unmanned aerial vehicle, computer and other devices. The & AC output ports (2 AC output ports for the charging gun version) with rated power 2200W and peak power 4400W can supply power to most of household appliances. Before using, you shall confirm that the power of the appliance is lower than the rated power of the product

4 How toknow the running time of the product?

‘The product has a display screen and a variety of functions, wherein the endurance time under current stable use can be calculated and displayed

5.Can the product charge while discharging?

The product can be used while charging wherein the power source is obtained from commercial power.

6.How tostore the product?

When storing in short term, charge the product to approx. 50% and place it into the dry and ventilated environment When storing n long term, it is recommended to carry out a cycle of charging and discharging in no more than 3 montns sothat the battery power can be kept about 60% and the service lfe of the product can be prolonged.

7How long s the warranty period?

The warranty period is two years since you purchase. If there is a quality problem caused by non-human factors during the warranty period, you can send it back for maintenance.

8Notes for charging and discharging

(1)After charging the product for a long time, leave it for about 2 hours and then use the AC output function. (2)After discharging the product for a long time, leave it for about 2 hours and then charge it

9.0ther instructions for this product

This product is not water proof and can not be taken on the plane. Only professional personnel of the company can disassemble the product for maintenance.

List of Package

| Host
---|---
| AC Charging Cable
| Car-mounted  Charging Cable for Cigarette Lighter
| Operation Manual‘and Maintenance Card

Maintenance and Repair

1. he optimal temperature for storing the product shall be maintained between 10°C and 35°C.
2. When storinginlong term. it is recommended to carry out a cycle of charging and discharging in nomore than 3months 50 that the battery power can be kept about 60% and the service ife of the product can be prolonged.
3. Ifthe power runs out nlong-term storage, the product may not work After itis connected to the charger, it can resume work
4. Under humid environment, please maintain and repair the product and store it with the product package to separate from high temperature and humidity. Please check the device before using.

Customer Service

24-month limited warranty

http://www.joyvolt-power.com

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol lowing two conditjons:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
3.  Changes or modifications not expressly approved by the party responsible for compl iance could void the user’ s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital, device,pursuant to Part 15 of the FCC Rules, hese inits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipnent generates uses and can radiate radio frequence energy and, if not installed and Used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
articular instal lation, if this equipment does cause harmful interference to radio or elevision reception,which can be determined by turning the equiprent off and on, the user is encouraged to try to correct the interference by one or more of the fol lowing measures

1. Rearient or relocate the receiving antema.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

The devica has. been evaluated to moet. genoral RF exposure requirenont. Ths devicecan be used in_portable exposure condition without restriction,
This equipnent should be instal led and operated with a minumum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>