AMAZMASS GLAD-1 Neck Massager User Guide

June 13, 2024
AMAZMASS

GLAD-1 Neck Massager
User GuideAMAZMASS GLAD-1 Neck Massager

Product Introduction/Product Structure Diagram

  1. This product is a waist and abdomen massager.: mechanical buttons plus remote control.
  2. This product adopts hot compress, which can improve blood circulation, relieve waist fatigue and pressure, and protect waist health by hot compress and low-frequency pulse on acupuncture points around waist and abdomen.

AMAZMASS GLAD-1 Neck Massager - Diagram

Method of Product Operation

  1. Wear the product on the waist and abdomen.
  2. Long press the 【 】 button to turn on the machine and broadcast “Power On”, and the indicator light keeps green light.
  3. Long press the 【 】 button to turn off the machine when it is turned on and broadcast “Thanks For Using”.
  4. Short press the 【 】 button to broadcast “Auto Massage Lumbar Scrape、 Lumbar Tapping Lumbar Relaxation Lumbar Massage、 Lumbar Acupuncture”.
  5. Short press the “+” button to adjust the enhanced low-frequency gear, and the intensity 1- intensity 16 can be adjusted. When adjusting the gear, “One Intensity …Sixteen Intensity” will be broadcast. Long press the “+” button to switch modes, and broadcast “High Heating—-Heating Off—-Low Heating—-High Heating—- ” in turn.
  6. Short press the “-” button to adjust the reduction low-frequency gear, the intensity 16-intensity 1-pulse off can be adjusted. When adjusting the gear, “Sixteen Intensity…. One Intensity-Pulse Off” will be broadcast. Long press the “-” button to turn on or off the voice broadcast function and broadcast “Voice On or Voice Off”. When the voice is off, press any button without any prompt sound.
  7. Memory mode: After the product is turned on, it will memorize the massage mode and intensity when it was turned off last time and broadcast it.

Method of Remote control Operation

  1. Long press the [ ] button to turn on the machine, broadcast “Power On”, and the indicator light flashes green.
  2. In the power-on state, long press the [ ] button to turn off the machine and broadcast “Thanks For Using”.
  3. In the power-on state, short press the “H” button to adjust the temperature, and broadcast “High Heating—-Heating Off—-Low Heating—-High Heating—-“.
  4. Short press the “M” button to switch the mode, and broadcast “Auto Massage、 Lumbar Scrape、 Lumbar Tapping Lumbar Relaxation Lumbar Massage、 Lumbar Acupuncture”.
  5. When switching the mode, the low-frequency will return to the 1st gear.
  6. Long press the “M” button to turn on or off the voice broadcast function and broadcast “Voice On or Voice Off”. When the voice is off, press any button without any prompt sound.
  7. Short press the “+” button to adjust the enhanced low-frequency gear, and the intensity 1- intensity 16 can be adjusted. When adjusting the gear, “One Intensity … Sixteen Intensity” will be broadcast. Short press the “-” button to adjust the reduction low-frequency gear, the intensity 16-intensity 1-pulse off can be adjusted. When adjusting the gear, “Sixteen Intensity…. One Intensity—Pulse Off” will be broadcast.
  8. Long press the “-” button to turn off the pulse and broadcast “Pulse Off”.

Remarks:

  1. After long-pressing the main engine button” 【 】” or using the remote control to turn off the machine, the main engine will enter the remote control state for 2 minutes (still can be turned on within 2 minutes by the remote control), and if there is no any operation within 2 minutes, the main engine will enter the sleep state. If you need to use it again, you need to long-press the main engine button” 【 】” to turn on the machine.
  2. After the machine is turned on, it will automatically turn off if no use within two minutes.
  3. When the power of the product is low, the indicator light flashes yellow, please charge it in time. The product can’t use when charging, and there will be a voice broadcast to remind “Low Battery”. The indicator light turns yellow when charging, and turns green after about 1.5H of fully charging. Please use a DC5V, 1A, or above adapter for charging.”

Precautions

  1. Do not fall asleep while using this product (there is a risk of burns).
  2. For patients with acute swelling or bleeding in the abdomen, please consult a doctor before use.
  3. The continuous use interval is at least 1 hour.
  4. Patients with edema, bacterial infection, or other special inflammation suspected to be caused by acute trauma should consult a doctor before use.
  5. Pregnant women, infants and young children, patients with skin sensory impairment or skin abnormalities are not allowed to use.
  6. This product is designed as a household electronic product and is not suitable for diagnostic and therapeutic use.
  7. When the pain worsens when using the product, please stop using it immediately.
  8. When using the product, if you feel that the kneading force is too strong, you can press the power button to turn off or tear off the strap immediately.
  9. When a fault occurs, professional technicians should be invited to repair it.
  10. If the product is not in use for a long time, please put the product and the power adapter in the packaging box and store it in a dry and ventilated place. Do not store it in a folded way. It should be damp-proof and not close to the source.
  11. If you need to clean the product, please turn off the power first, then use a soft brush or a dry cloth dampened with water or a neutral detergent to wipe it.
  12. The product has a heating surface, and people who are not sensitive to heat must pay attention when using it.

Safety Precautions

  1. When charging the product, the power supply must be plugged into a socket that complies with safety regulations.
  2. Do not disassemble this product by yourself to avoid electric shock.
  3. Do not place the product on an unstable table to prevent the product from falling and being damaged.
  4. Do not use the product in a place with high temperature or high humidity.
  5. In the following cases, please unplug the power supply and stop using:
    When the power cord or power plug damaged;
    This product is wet;
    This product may cause safety factors such as smoke and fire.

Specifications

Product name Waist and abdomen massager
Item model number Glad-1
Rated input voltage: 5V=
Rated input power: 5W
Product net weight including remote control: about 310g
Product size: 1959245mm
Default single use time: 15min
Temperature: low temperature 38±3°C;

high temperature 42±3°C

Daily Maintenance and Cleaning

  1. When cleaning and maintaining the product, please turn off the machine first and then use a wet product to clean it. When it is particularly dirty, it can be disinfected with a little medical alcohol (concentration 75%).
  2. Please use a neutral detergent and a soft cloth for daily maintenance. Do not use corrosive detergents, and do not soak in water for rinsing.
  3. During the cleaning process, water or other liquids should be prevented from entering the body, so as to avoid the danger of short circuit and electric shock during use.

Common Problems and Solutions

If you encounter problems when using the product, please refer to the following tips and solutions:

No.| Product Failure Description| Possible Causes| Solutions
---|---|---|---
1| Can’t turn on by pressing the power button| Lithium battery is low| Charge the main engine
2| The product is heat anomaly| Heating function on| Turn off the heating function
Use this product continuously for up to 45 minutes| Turn off the product and let it cool for 60 minutes
3| The product being charged does not work| Charging protection| After charging is complete, unplug the charging power supply to turn it on and use

Note
The crossed-out dustbin symbol on batteries or accumulators means that they should not be disposed of with household waste at the end of its useful life.
life. If the batteries or accumulators contain mercury (Hg), cadmium (Cd) or lead (Pb), you will find the corresponding chemical symbol under the symbol of the crossed out trash can. You are legally required to return used batteries and accumulators after use. You can do it free of charge in the retail store or at another collection point near you.
Information on electrical and electronic equipment The following note is addressed to private end users who use electrical and/or electronic equipment.

  1. Separate collection of old devices
    Electrical and electronic equipment that has become waste is called legacy equipment. Owners of older devices should collect them separately from unsorted municipal waste. The elders appliances are not part of household waste, but systems collection and return specials.

  2. Batteries and accumulators
    Owners of old devices should separate the old batteries and accumulators, which are not included in the old device, from the old device before handing them over to a collection point. This does not apply if old appliances are handed over to public waste disposal authorities waste and are separated there from other old appliances for their preparation for reuse.

  3. Options for returning old devices
    If you have old devices, you can return them to the trade-in or the collection of old devices installed and made available by the public waste disposal authorities with the aim of eliminating old devices correctly. If necessary, it is also possible to deposit electrical and electronic equipment in order to their reuse. You can get more detailed information at this subject to the corresponding collection or return point.

  4. Data Protection Notice
    Old devices often contain sensitive personal data. This applies in particular to information and telecommunications such as computers and smartphones. For your own interest, please note that each end user is responsible for delete data on old devices.

  5. Meaning of the “crossed-out trash can” symbol
    The symbol of a crossed-out trash can regularly represented on devices electrical and electronic means that the corresponding device will be separated unsorted Siedlu at the end of its life.

MANUFACTURER
Shenzhen Ginto E-Commerce Co., Limited
longhuajiedaosanlianshequ sanlianchuangyelu 19hao
gongcunxincheng shangyezhongxin huihaiguangchang Bzuo
13ceng 1308 shenzhen guangdong China 518000
supports@amzmass.com
Made in China

Company:Qing UG(haftungsbeschränkt)
Address:Undinestr. 7, 12203 Berlin Germany

TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd,
Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals