BSL NEW ENERGY TECHNOLOGY CO LTD B-LFP-51.2-100PWTL Wall Mounted LFP Energy Storage Battery System Instruction Manual
- June 13, 2024
- BSL NEW ENERGY TECHNOLOGY CO LTD
Table of Contents
BSL NEW ENERGY TECHNOLOGY CO LTD B-LFP-51.2-100PWTL Wall Mounted LFP Energy Storage Battery System Instruction Manual
NOTICE
The purchased products, services and features are stipulated by the contract made that between BSL NEW ENERGY TECHNOLOGY CO.LTD and customer. All parts of the products, services features described in this document may not be within the purchase scope or the usage scope. Unless and specified in the contract, all statements, information, and recommendations in this document are provided “AS IS” without warranties, guarantees or representations of any kind, either express or implied.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
1 Summary
The integrated LFP battery pack PowerLine – 5 is a household energy storage battery system developed by BSL NEW ENERGY TECHNOLOGY CO, LTD., which is characterized by ultra-thin, light weight, self maintenance and management, convenience, energy efficiency and environmental protection, and maximum support for 16 groups of parallel use; It is suitable for mainstream inverters in the market, and is suitable for wall mounted installation in families, and can be used in household, industrial and commercial energy storage and many other fields.
1.1 Main Characteristics
- The positive pole of the battery is made of lithium ferrous phosphate (LiFePO4) material, with good safety performance and long cycle life
- Battery management adopts high-performance BMS battery management system, with functions such as over discharge, overcharge, over current, short circuit, high and low temperature protection, and the calculation of the capacity is more accurate because of the advanced SOC algorithm.
- It has the function of elf management of charge- discharge and real-time reporting of information ,so that the back-end monitoring unit can timely and accurately reflect the battery information
- With charging current limiting function. When the value of the charging current is larger than the over current protection , it will automatically start to limit the current charging.
- With the function of automatic wake-up, the battery automatically activates when the base station is powered on again, without manual startup.
- With remote measurement, remote control, remote signaling and remote adjustment functions, whith can totally realize remote monitoring.
- Its configuration is flexible,and multiple modules can be used in parallel, so the system whose standby time can be extended.
- Self cooling and no noise.
- With better battery compatibility, more suitable for home power backup.
- It can add heating, fire fighting and other modules As required.
1.2 Operating Environment
-
the Environmental Requirement of Usage
While you are using the battery, you should be in the environment where is no corrosive, explosive, insulating damaging gas and conductive dust, and keep away from high heat source. -
Range of Ambient Temperature, Humidity and Atmospheric difference
Range of charging temperature：0℃～65℃；
Range of discharging temperature：-20℃～65℃；
Range of storage temperature：-20℃～65℃；
Range of relative humidity：≤90%（45℃±2℃）；
Range of storage humidity：≤95%（45℃±2℃）；
Range of atmospheric pressure：70～106kPa
1.3 Main Technical Specification
2 Description of Product
2.1 Appearance
2.2 The Sketch Map and Introduction of the Panel
3 Operating Principal of the System
4 Installation Guide
5 Maintenance
6 Packing / Shipping / Storage
- The battery pack shall be packaged as a whole to ensure that the product is free from any harmful gas, chemical pollution, moisture and mechanical damage during handling, transportation and storage; The packing box has been marked with: product name, model and specification, date of manufacture, quantity, batch number, etc.
- When handling the product, it shall be handled with care and shall not be subjected to external fierce impact; During transportation, the product shall be placed strictly in the direction marked on the packaging box to avoid product vibration and inversion.
- The battery pack shall be stored in a dry warehouse without exposure to the sun and rain; Products with a storage period of more than 6 months shall be aligned for capacity check test and power supply treatment. Products with a storage period of more than 1 year shall be reinspected and can only be used after qualification.