mini-i Pro 4 Hand Hydraulic Punch Set User Manual

User Manual

Packing list

Parts and names

Top

1. Power on/Standby
   After connecting to the power supply, press this button to turn on the unit, hold the button for two seconds to standby. It takes about 30 seconds for the first start up after connecting to the power supply each time.
   When the device is working, press this button to mute, press again to unmute.

Front

1. Headphone jack
   The 6.35 mm headphone jack is for single-ended headphones, the 4.4 mm headphone jack is for balanced headphones.

2. LCD screen

3. Volume key
   Tap on the arrow keys to change the volume step by step.
   Hold the arrow keys for more than two seconds to change the volume rapidly.

LCD screen
Main information

1. Media and audio information
   Including album art, track title, artist, duration, audio format, sampling rate of the track and the filter type being used.

2. Input channel
   The name of selected input channel.

3. Status bar
   Including status of clock and network connection.

4. Output channel and volume
   The selected output channel and volume level.

Operation of touch screen

Swipe right to open the shortcut page.
Swipe left to open the menu.

Rear

1. Ac input
   This unit adapts to AC100-240V power voltage range. Please make sure to use the product in the power voltage range mentioned above.
   Please use the power cable which includes an earth wire. Please ensure you have a reliable earth wire connection. Otherwise, the casing of the unit may have a slightly charged touch. If you need the unit to be turned off completely, please unplug the power cable.

2. Ethernet
   Connect to LAN port of the network router, the connection supports up to Gigabit Ethernet transmission.

3. usB Typec
   Connect to USB storage devices which requires not higher than SV/lA power supply.

4. USB Audio
   Connect to computers, smart phones and tablets as external audio source devices through USB-B cables.

5. Reset button
   Only use this button when the device works incorrectly, the device can be reset to factory state. Please operate under the instructions by service team from Matrix Audio.

6. HDMI ARC
   Connect to TVs with ARC(Audio Return Channel)functionalities through HDMI cables.

7. optical & Coaxial input
   Connect to front-end devices with S/PDIF signal outputs through optical or coaxial cables.

8. Analog input
   Connect to vinyl turntables or devices with analog outputs through RCA cables.

9. Analog output
   Connect to active speakers or amplifiers through RCA or XLR cables.

Remote control

1. Power on/Standby

2. volume

3. Mute/Unmute
   Press to mute, press again to unmute. You also can unmute by pressing the /» buttons in mute state.

4. Playback control area
   When the input channel supports, the playback can be controlled by these buttons.

5. Dimmer

6. Programmable button
   Define the functionalities of the programmable button through MA Remote App, the function is set to ‘Filter’ by default.

7. Input channels

The remote control uses a CR2032 battery. Slide the battery cover in the direction of the arrow to open the battery holder. Please pay attention to the polarities when installing the battery.

Point the remote control to the device when using it, the operating distance is about 8 meters.
When the battery is low, there will be a message showing on the device display to notify you about replacing the battery.
If there are more than one Matrix Audio device in a single environment, in order to prevent 1 remote control from controlling multiple devices at the same time, we preset 5 sets of address codes in the remote control, these address codes can be configured in the Settings menu showing below, and follow the instructions on the device display.

Operations before using

Connect to network
LAN
Connect the product to the LAN port of the network router through an Ethernet cable. It is recommended to set up the router as a DHCP server. The unit will be assigned an IP address automatically. Select “LAN” in option Network
in Settings menu, after joining the network, there will be a  shown in the status bar.

Wi-Fi
Enter Settings menu – Network- Wi-Fi, after network scanning complete, choose the SSID of your network and enter the passwords, there will be a shown in the status bar after connected. The device supports 2.4GHz/5GHz wireless network.
When the connection has no Internet access, there will be a in the status bar.

MA Remote App
Install MA Remote App for your iPad, iPhone or Android phone.

https://matrix-digi.com/dl

Open the app, it will automatically search for the device and enter the home page after the device is added.
If you need to add the device manually, you can follow the prompts in the app wizard and scan the host QR code to add it manually.

• Please make sure the device and your phone or iPad in the same network before connection.

To control and configure the device through MA Remote App, or playback streaming music from the element devices, please refer to www.matrix-digi.com/tutorials for instructions.

https://www.matrix-digi.com/tutorials

Driver for USB Audio
When connecting the device to a Windows 7/8/10/11 computer via USB connection as an external audio device, please install drivers as following instructions:

1. Double-click the driver installation package and click “Next”.
2. Select installation path and click “Install”.
3. Click “Next” after the installation is complete.
4. Click “Finish” to close the Setup Wizard.

It’s no need to install drivers for macOS, just select “mini-i Series” as the audio output device in Sound Preferences.

The device can be connected to an iPhone or iPad via a Lightning to USB Camera Adapter.
The device can be connected to Android devices via an OTG adapter, but not every Android devices are compatible with the device via OTG connection.

Appendix

Technical specifications
Hardware Platform

CPU : Quad Cortex-ASS 2.0GHz
D/A Chip : ES9039Q2M

Digital Input
COAXIAL & OPTICAL

HDMI ARC

USB Audio

PCM| 16-24Bit/44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 3S2.8kHz, 384kHz, 70S.6kHz, 768kHz
---|---
MQA| 16-24Bit/44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 3S2.8kHz, 384kHz MQA or MQA Studio stream
DSD| 2.8MHz, S.6MHz, 11.2MHz (DoP)
DSD| 2.8MHz, S.6MHz, 11.2MHz, 22.4MHz (Native)

Aux Input

SNR: l00dB A-weighting
THD+N : <0.0035%@1k, <0.0035%@20Hz-20kHz
Frequency Response: 20Hz-20kHz ±0.1-3dB@46kHz
Channel Crosstalk: >-l0SdB
Input Level: 2.lVRMS Maximum

Line Output

XLR
SNR: 127dB A-weighting
THD+N : <0.00008%@1k, <0.00010%@20Hz-20kHz
Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz
Crosstalk: >-146dB
Output Level : 4.4VRMS@0d B

RCA
SNR: 121dB A-weighting
THD+N : <0.00015%@1k, <0.00020%@20Hz-20kHz
Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz
Channel Crosstalk: >-133dB
Output Level : 2.2VRMS@0d B

Headphone Output

4.4mm Balanced

SNR: 117dB A-weighting
THD+N: <0.0004%@20Hz-20kHz 4VRMS
Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz
Output Impedance : <22O
Output Power : 2200mW@33O, 950mW@300O, 500mW@600O, 1%6THD
Gain: +14dB

6.3Smm Single-ended

SNR: 116dB A-weighting
THD+N : <0.0005%@20Hz-20kHz 2VRMS
Frequency Response: 20Hz-20kHz ±0.1 -3dB@90kHz
Output Impedance: <11O
Output Power : 1200mW@33O, 260mW@300O, 130mW@600O, 1%6THD
Gain: +14dB

Network
LAN : 10/100/1000 Mbps
WLAN: 2.4 GHz/5 GHz

USB Type C
The USB Type C port provides a maximum power of SV/lA.
The USB Type C port works with devices which conform to the USB mass storage standard and supports FAT, FAT32, exFAT, and NTFS file formats, but is not guaranteed to be compatible with all storage devices.

MA Player
Controller app : MA Remote App
Local Playback :

Format Supported
MP3, WMA, WAV, AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF, CUE

PCM| 16-24Bit/44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
---|---
MQA| 16-24Bit/44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream
DSD| 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz

PCM| 16-24Bit /44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
---|---
MQA| 16-24Bit/44.lkHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz MQA or MQA Studio stream
DSD| 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz

AirPlay 2, DLNA/UPnP, TIDAL Connect, Spotify Connect, vTuner, Radio
Paradise, HIRESAUDIO, the audio specs depend on the service provider.

Power specifications
Power Voltage : AC 100V-240V 50/60Hz
Standby Power Consumption : <5W
Maximum Power Consumption : < 30W

Other specifications
Weight : 1.3kg (2.87 pounds)
Size : Width 224 mm (8.80 inches)
Depth 186 mm (7.32 inches)
Height 53 mm (2.07 inches)

* Specifications are subject to change without notice.

Appendix

About MQA (Master Quality Authenticated)
This unit includes a MQA full decoder, which enables you to playback MQA audio files via streaming or USB audio port, delivering the sound of the original master recording.
The dots beside the MQA logo green .or blue . to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue . to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
The dot glows magenta . to indicate that the unit is rendering an MQA stream or file. This delivers the final unfold of the MQA file.
MQA and the Sound Wave Device are registered trade marks of MQA Limited. ©2016 About Roon Ready Being Roon Ready means that Matrix Audio music streamers transparently discover and connect to Roon without any configuration, and bit- perfect audio is delivered from Roon to your music streamers.

About Spotify
Use your phone, tablet or computer as a remote control for Spotify. Go to www.spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses

Attention

• This product is for indoor use only.
• For full ventilation, it is recommended to reserve a space of larger than 5 cm around the device.
• Do not cover the air vents with stuffs such as papers, tablecloths, and curtains to obstruct ventilation.
• Do not place stuff with flame, such as lighted candles, on the device.
• If the device is used in tropical areas, please be careful to prevent insects from entering the unit through the air vents.
• The device must not be subject to water droplets or splashes. Please do not place stuffs filled with liquids such as vases and cups on or near the device.
• Do not put stuffs around the device power plug and the AC power socket, in order to disconnect the power supply easily when needed.

Into The Music

www.matrix-digi.com

Matrix Electronic Technology Co,, LTD
+86-29-86211122
B-801, No.111 Fengcheng 5th Rd
Xi’an, China
20230724Ver.1.1

Documents / Resources

| mini-i mini-i Pro 4 Hand Hydraulic Punch Set [pdf] User Manual
mini-i Pro 4 Hand Hydraulic Punch Set, mini-i Pro 4, Hand Hydraulic Punch Set, Hydraulic Punch Set, Punch Set
---|---

References

• Video tutorial
• Spotify - Connect
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>