dals LNR24-CC Architectural Recessed Lighting Installation Guide
- June 12, 2024
- dals
Table of Contents
dals LNR24-CC Architectural Recessed Lighting
More Information
MODEL| WATTS| DELIVERED LUMENS| CRI
/RC
| KELVIN| VOLTAGE| DIMMABLE
---|---|---|---|---|---|---
LNR24- CC| 20W| 1725 Im| 90| 2700K
3000K
3500K
4000K
5000K
| 120V| TRIAC
LNR24-CC-V| 20W| 1725 Im| 120-277-347V| 0-10V
LNR48- CC| 40W| 3760 Im| 120V| TRIAC
LNR48-CC-V| 40W| 3760 Im| 120-277-347V| 0-10V
- Works with most dimmers. Refer to DALS website for dimmer compatibility list.
ITEMS INCLUDED IN THE BOX
- LED recesed light
- Junction box with integrated driver
- Mounting hardware
WARRANTY
- DALS offers a 5 year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics.
- To contact DALS customer service call 1 877 430 1818 or send an e-mail to [email protected].
Installation guide
BEFORE YOU START
- BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER.
- Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation should be done by a certified electrician.
- This class B digital apparatus complies with Canadian ICES-005. This digital apparatus does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
- Cut hole in ceiling and prepare supply wires. Install and unshield the line feed wire 6″ (15 cm) and strip wires 5/8″ (1.6 cm). Bring supply power to junction box through knockout.
- LNR24-CC:2-1/8″× 23-114″
- LNR24-CC-V:2-1/8″× 23-114″
- LNR48-CC:2-1/8″× 47-114″
- LNR48-CC-V:2-118″ × 47-114″
- Open the lid of the junction box. Use the quick connectors to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box and to match the copper wire from the line feed and with the green wire of the junction box.
- Compress the springs and push the fixture into the opening. It is easier to do one spring at a time.
Contact
- 1 877 430 1818
- www.dals.com
Read User Manual Online (PDF format)
Loading......