nVent A9036SOF19 Swing Out Rack Mounting Frame Instructions
- June 12, 2024
- nVent
Table of Contents
nVent A9036SOF19 Swing Out Rack Mounting Frame
Swing−Out Rack Mounting Frame
- Install the bottom support assembly (item 3) into the enclosure. Insert clamping nuts (item 4) into the bottom channel, and attach using 5/16−18×1 hex head screws, lock washers, and flat washers (items 6,7, and 8) with spacers (item 5) between mounts and bottom mounting channels. Spacers can be moved from side to side to align the swing frame; all spacers may not be required.
- Place the plastic washer (item 9) over the pin on the bottom support. Position the swing frame (item 1) onto the pin, and place the top support (item 2) onto the swing frame. Attach top support to top mounting channels using clamping nuts, spacers, 5/16 screws, lock washers, and flat washers (items 4,5,6,7, and 8). Adjust the frame to the desired depth in the enclosure.
NOTE : If the swing frame is to be heavily loaded, all spacers should be put on the pivot side at the bottom and the latch side at the top.
2018 Hoffman Enclosures Inc. PH 763 422 2211 nVent.com/HOFFMAN P/N 99401687
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>