minuendo MSA 101 Smart Alert Earplugs Instructions

minuendo MSA 101 Smart Alert Earplugs

Product Information

B Ear Tip x 2
C Ear Hook (Left and Right)
D Cable x 2
E Button
F LED
G Charging Port
H Sound Port
J Noise Sensors x 3
K Collar Unit

Product Usage Instructions

Charging
To charge the Smart Alert earplugs, follow one of the methods below:

to the power
charger. Plug the charger into a wall socket and switch the charger
on.
With a dock (optional)| Insert the right-hand side of the Collar Unit [R] into an
available station on the Dock. Ensure that the Earplug is fully
inserted.

Turn On & Off
To turn on the Smart Alert earplugs, press and hold the Button for 1 second. The earplugs will automatically turn on when disconnected from a charging source.

To turn off the Smart Alert earplugs, press and hold the Button for 3 seconds. The earplugs will automatically turn off when connected to a charging source.

Wearing Smart Alert Earplugs
Refer to Fig. 6 in the user manual for instructions on how to wear the Smart Alert earplugs.

Check Battery Level
To check the battery status of the Smart Alert earplugs, press the Button for 1 second. The Earplug LED will indicate the battery status:

Low Battery Indicator

When the battery level is LOW (< 30 mins remaining), the Smart Alert earplugs will beep every 15 seconds. Place the earplugs on charge to recharge the battery.

If the battery level reaches a critically low state, the earplugs will automatically turn off. To use them again, they must be recharged and connected to a Dock or the Cloud service (via a PC and charging cable) to reset the internal timing clock.

General Operation
Before using the Smart Alert earplugs, it is important to read and understand the Safety Information provided in the user manual.

To switch on the earplugs, press and hold the Button for 1 second. The Earplug LED will blink rapidly in green three times, followed by slow blinking green to indicate it is on.
To switch off the earplugs, press and hold the Button for 3 seconds. The earplugs will automatically turn off when connected to a charging source.

USER INSTRUCTION CONTENTS

Earplug Components (Reference Fig. 1)

USER INSTRUCTION SYMBOLS
This user guide uses these symbols below to represent product feedback.

Compliance and Certification

This Category III PPE product meets the Essential Health and Safety Requirements (EHSRs) as laid out in Annex II and conforms with quality assurance of the production process, module C2 (Annex VII) PPE Regulation (EU) 2016/425. PPE Regulation (EU) 2016/425 as bought into UK Law and amended.
CE and UKCA markings are in accordance with EN 352-2:2020. The products are approved to Module B EU type-examination and C2 ongoing production monitoring by SATRA.

UKCA Type Approval:
SATRA Technology Centre Ltd (0321). Wyndham Way, Telford Way. Kettering. Northamptonshire. NN16 8SD. UK.

CE Type Approval:
SATRA Technology Europe Ltd (2777). Bracetown Business Park. Clonee. D15 YN29. Ireland
The Earplug has been further tested to and complies with these specifications:

• EN 61000-6-2:2005, EN 61000-6-2:2005/AC:2005”, “EN 61000-6-3:2007, EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-3:2007/A1:2011included within Electromagnetic Compatibility
• Directive 2014/30/EU. RoHS Directive 2011/65/EU. 2011/65/EU (RoHS2), 2015/863 (RoHS3)
  Further information and the full text of the EU and UKCA Declaration of Conformity is available at www.minuendo.com/support or search for Minuendo Smart alert earplugs.

FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This equipment referenced in this declaration is identical to the unit tested and found acceptable with the standards. The technical records maintained by the responsible party continue to reflect the equipment being produced under this Declaration of Conformity within the variation that can be expected due to quantity production and testing on a statistical basis.

Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC-id: 2A8VEMSA101
Conforms to the following specifications: FCC 47 CFR 15: Radio frequency device, subpart B: Unintentional radiators. Class B Equipment

Laboratory Attenuation Tables (See Annex 1)

• A: Frequency
• B: Mean Attenuation
• C: Standard Deviation
• D: Assumed Protection Value (APV)

Introduction

Minuendo Smart alert earplugs (Earplug) is an in-ear hearing protector with continuous personal exposure monitoring. It provides:

• Continuous personal noise exposure monitoring and data logging.
• Noise level and cumulative exposure indications, through audible, haptic and LED feedback.
• Passive attenuation filtering with flat response for natural ambient sound.
• Data logging for synchronization to secure cloud data service.

First Use
When Earplug is turned ON for the first time the LED will blink PURPLE. Connect the Earplug to the Dock (if available) or a PC connected with a Cable to the Smart Alert cloud to download updates if needed and configure for first use. If the Earplug is not connect as described, it will continue to function as described herein. However, the data logging capability will not be available.

Charging and Power
Cable (if available):
Connect the charging cable to the Earplug and then to the power charger. Plug the charger into a wall socket and switch the charger on. Earplug LED will indicate status.

With a dock (Fig. 4-b) *Optional

Dock (if available):
Insert the right-hand side of the Collar Unit [R] into an available station on the Dock. Ensure that the Earplug is fully inserted.

Advisory

• If supplied, assemble the power charger with the adapter for your location.
• Ensure correct orientation of cable to Earplug connector, it is magnetic.
• Fully charge the battery before first use.
• Switch off the power charger before disconnecting the Earplug cable.
• When the Earplug is disconnected, it will turn ON.
• The Earplug will continue to provide hearing protection when it is OFF.

Check Battery Level
To confirm battery status, press the Button (1 sec). Earplug LED will indicate status.

Low Battery Indicator
When the battery level is LOW (< 30 mins remaining) the Earplug will beep every 15 seconds. Place the Earplug on charge.

Low Battery Shut-down
If the battery level reaches a critically low state it will automatically turn OFF. The Earplug must be recharged before further use. When turned ON the Earplug LED will blink PURPLE, the Earplug must be connected to a Dock or the Cloud service (via a PC and charging cable) to reset the internal timing clock before further use.

Safety Information

Please read before first use and follow all safety information contained with these instructions. Retain them for future reference.

Warning:

• The protection afforded by the Earplug and your hearing health may be severely impacted if you do not follow the instructions in this manual.
• Improper fit of this device will reduce its effectiveness in attenuating noise. Consult these instructions for proper fit.
• Failure to act upon the Noise Alert or Exposure Alarm may increase your risk of Noise-Induced Hearing Loss.
• Misuse or failure to wear hearing protection at all times when exposed to hazardous noise may result in hearing loss or injury.
• The Earplug should not be used in environments that are considered flammable or explosive atmospheres. The Earplug contains a battery and electrical components that may cause ignition. Do not use it in environments where sparks may cause fire or explosion.
• The Earplug should not be used where there is a risk that the Collar Unit to Earpiece cable or the Collar Unit could be caught up during use.
• Do not submerge the Earplug into the water. Dry fully before charging or connecting with the Dock.
• Do not puncture the seal at the end of the Earpiece nozzles. If damaged replace the Earplug.
• To avoid the risk of choking Ear Tips or Ear Hooks should not be eaten or placed in the mouth.
• Ensure the Earplug is turned ON before each use and the battery has sufficient charge to remain operational for your planned period of work.

Caution:

• Ensure that the Earplug and Ear Tips are regularly inspected for serviceability.
• Do not put dirty or damaged Ear Tips into your ear. If uncertain, replace Ear Tips.
• Only use authorised Ear Tips detailed in this instruction manual.
• Do not remove Earpieces by pulling on the cable or Collar Unit.
• Sudden or fast removal of Earpieces out of the ear canal may damage the eardrum.
• Do not tap or bang the Earpieces when fitted in your ear.
• Seek medical assistance if an Ear Tip remains in your ear when the Earpiece is removed.
• The Earplug battery should be recharged on a frequent basis.
• Battery charging should be undertaken indoors.
• Do not use the Earplug if a fault is displayed via the LED or alternatively, if the Cloud or Dock are being used; a product fault is notified to you by email/SMS text message. Contact manufacturer for details.
• Ensure that the Earplug firmware is always at the latest version. Contact manufacturer for details.
• The Earplug should not be used for more than 10 years from the date of manufacture stated on the packaging.

Wearing and Fitting Instructions

Assemble Earpieces Before first use

Ear Hooks: (Reference Fig. 2)
Select the largest Ear Hook you think will fit comfortably. Put the Ear Hook (by itself) into the ear. Rotate the Ear Hook to ensure the hook is secured in the arch (concha) of the ear. Try a different size if preferred. When the preferred size is selected, remove it from the ear and push it onto the base of the corresponding Earpiece (L or R). Repeat the process for the opposite ear.

Ear Tips: (Reference Fig. 3)
Choose the style of ear tip, then the size of the ear tip you feel will provide a comfortable but tight fit. Push it fully onto the nozzle of the earpiece. There should be no gaps between the Ear Tip, the Ear Hook (if fitted) and the base of the earpiece.

Advisory

• It is possible to wear the Earplug earpiece without the Ear Hook fitted.
• Video instructions for earpiece assembly and Ear Tip fitting at https://help.minuendo.com/en/support/smart-alert-earplug
• The Ear Tips should be correctly fitted for optimal performance and comfort.
• Ears and ear canals can vary in size between Left and Right. Choose the correct size for each ear.

Put Earplug On
Use both hands to pass the Collar Unit around the back of your neck. The Collar Unit shall rest on your shoulders, with the R side on your right shoulder.

Advisory

• The Collar Unit can be worn over clothing, or underneath a jacket. Wearing underneath a jacket may impact your awareness of the Earplug feedback; Haptic may increase & audible signal may decrease.
• Avoid over-stretching the Collar Unit pulling it over your head or helmet (if fitted).
• If using a helmet with a chin strap, fit the chin strap first.

Fit the assembled Earpieces into each ear.
Ensure the correct-sized Ear Tip is fitted to the Earpiece. If using Foam Ear Tips, gently compress and roll the Ear Tip ensuring there are no creases. Insert Ear Tip into the ear canal. Apply gentle pressure to the Earpiece to hold it while foam expands. The Earpiece should sit firmly in the ear.

Advisory

• Gently pull the ear outward to straighten the ear canal before inserting the ear tip.
• The right combination of Ear Hook and Tip will ensure wearing comfort.
• Rotate Earpieces to align the hook into the concha (if using Ear Hooks). Otherwise rotate to align the Earpiece nozzle within the ear canal.

Take Earplug Off
To remove the Earpieces from each ear, slowly pull and while twisting them. Remove heavily soiled Ear Tips and discard in an appropriate waste collector. Use both hands to remove the Collar Unit from around the back of your neck. Place the Earplug on charge.

Advisory

• Avoid over-stretching the Collar Unit pulling it over your head or helmet (if fitted).
• Remove helmet chin strap first , if fitted over the Earplug (Earpieces).

General Operation

Before you use the Earplug, you must read and understand the
Safety Information in this manual.

Switch ON
Press and hold the Button for 1 second. The Earplug will automatically turn ON when disconnected from a charging source.

Switch   OFF
Press and hold the Button for 3 secs. Earplug will automatically turn OFF when connected to a charging source.

Sleep Mode & Wake Up
To preserve power, when the Earplug is not worn and left stationary for 15 minutes it will go to sleep. When in Sleep Mode, if the Earplug is picked up, it will Wake Up.

Earplug Warnings (Alerts and Alarms)
The Earplug provides feedback regarding noise level and cumulative average exposure.

Noise Indicator (optional feature):
Activates when the noise level measured by either noise sensor in each Earpiece has exceeded the alert threshold. The default threshold approximately corresponds to 85 dB.

Noise Alert:

Activates when the noise level measured by either noise sensor in each Earpiece has exceeded the alert threshold. The default threshold approximately corresponds to 85 dB. The Noise Alert system is designed to reduce false alerts when the Earpiece is correctly fitted in your ear (as measured within the ear canal with the Earpiece correctly fitted).

Recommended actions upon receiving a Noise Alert include (but are not limited to):

• Fit the Earpieces if either or both are not fitted when the Noise Alert activates.
• Move away from the source of noise if the source of noise is known, and/or practicably possible.
• Check the fit and re-fit the Earpieces if both are already in-ear when the Noise Alert activities.
• Try an alternative Ear Tip, different size and or shape.
• Place an additional Hearing Protection Device such as passive or electronic/communication earmuffs over the top of each Earpiece.

Exposure Alarm:

• Activates, when the equivalent average noise level normalised for an 8-hour working day, has exceeded the exposure action value. Default exposure action threshold corresponds to 85 dB, 8hrs**. Once activated, the LED will continue blinking RED until an exposure reset has occurred when sufficient time has elapsed when you are not exposed to noise. Upon receiving an Exposure
• Alarm contact your supervisor, local safety representative or Safety/Hearing conservation manager for direction on what action you should take. (**
• This can be configured for specific customers refer to your company safety representative for your exposure action threshold)

Over-Protection Indication:
Is given when the attenuation is much higher than needed based on the measured noise environment at your ear. This might occur when earmuffs are worn over the Earpieces (double protection) and the ambient noise levels are below 95 dB.

Earplug Data Synchronisation with Cloud
The Earplug continuously logs data*. These data can be synchronised to a secure cloud data service. Data synchronisation can be achieved through;

1. Data Synchronisation (charging cable) connected to a personal computer.
2. The charging cable connected to a PC using the Smart Alert cloud service.

Data is averaged. It does not record conversations and audio streams cannot be reconstructed from the stored data.

Cleaning, Maintenance, Calibration and Product Reset

Cleaning & Hygiene
Clean the Earplug regularly. Use a damp cloth or the supplied cleaning brush.
Do not use abrasive materials to clean any part of the Earplug. Replace Ear
Tips if they are damaged or dirty. The Flange Ear Tips can be wiped clean with a damp cloth. Visually inspect the Ear Tips under the flanges and replace them as needed. The Earplug is designed as personal equipment and should normally be used by a single person. If transferring the Earplug to another user use a sanitising wipe on all elements. Change the Ear Tips and Ear Hooks. Clean the contacts on the Charging Port if debris is visible or if you have problems charging the Earplug with either the cable or Dock (optional).
Certain chemical substances may adversely affect the Earplug. Contact the manufacturer for further details.

Maintenance
Regularly check the condition of the Earplug. Pay attention to the Earpiece nozzle and ensure they are not blocked by cerumen. Check the condition of the Ear Tips before each use. Do not open or attempt to repair any part of the Earplug. Service and repair activities must be carried out by authorized personnel and facilities.

Calibration
The Earplug should be calibrated on an annual basis. The Earplug shall be returned to the manufacturer or authorised repair facility for the calibration procedure to be carried out.

Product Reset
In the event that the Earplug becomes unresponsive to Button presses or charging, first clean the contacts of the charging port and try a different charging cable or station within the Dock. To RESET the Earplug press and hold the Button for > 12 seconds. During this time, the Earplug will indicate the power off signal (see below), keep holding the button. There will be no indication from the Earplug at when the RESET has been undertaken. The unit will appear to power down. Keeping holding the Button. When reset there will not be any signal from the earplug.

To turn ON following a Reset, press and hold button for 2 seconds. The LED will initially fast blink PURPLE x 3 and then slow blink PURPLE continuously.
Connect the Earplug to the Dock or a PC (with the cable) to reset the internal clock. Failure to do so will result in corrupted data being uploaded to the secure data service. When the internal clock is set the Earplug will operate normally.

Storage, Transportation and Disposal

Storage (Daily Use)
When not in use, store the Earplug in the supplied carry bag at normal room temperature. Keep out of direct sunlight. If using a Dock, plug the Earplug into the Dock after daily use.

Storage (Beyond 2 weeks)
If the Earplug is not being used for 2 weeks or longer, ensure that the Earplug is manually turned OFF. Charge the Earplug every 4 weeks to preserve the battery.

Transportation
When transporting the Earplug use the supplied carry bag observing the operating storage temperature and humidity range.

Disposal
Follow national regulations, local and corporate guidelines for the safe disposal of the Earplug and the accessory items. The use of the WEEE symbol on the product indicates that this product may not be treated as household waste. Ensuring that this product is disposed of correctly, will help the environment.

For detailed information regarding recycling this product contact your local authority, your household/industrial waste disposal service provider.

Ear Tip Attenuation and Size Data

SINGLE FLANGE| Attenuation (dB) (re 20 µ PA)

Tested in accordance with EN352-2:2020

---|---
A: Frequency (Hz)| 63| 125| 250| 500| 1K| 2K| 4K| 8K
B: Mean Attenuation (dB)| 14.5| 13.8| 15.3| 13.8| 16.3| 19.4| 23.3| 26.5
C: Standard Deviation (dB)| 6.8| 5.3| 5.7| 3.7| 3.3| 4.8| 4.4| 6.8
D: Assumed Protection (dB)| 7.7| 8.5| 9.6| 10.0| 12.9| 14.6| 18.9| 19.7
 | SNR| H| M| L
---|---|---|---|---
Mean Attenuation (Xм)| 18.6| 19.7| 15.9| 14.5
Standard Deviation (Xs)| 3.1| 3.7| 3.0| 33
Final| 16| 16| 13| 11

SNR = 16 dB, H = 16 dB, M = 13 dB, L = 11 dB. In accordance with EN ISO 4869-2 with the parameter ∝=1

DOUBLE FLANGE| Attenuation (dB) (re 20 µ PA)

Tested in accordance with EN352-2:2020

---|---
A: Frequency (Hz)| 63| 125| 250| 500| 1K| 2K| 4K| 8K
B: Mean Attenuation (dB)| 14.0| 15.9| 14.9| 15.9| 15.5| 18.8| 19.3| 28.3
C: Standard Deviation (dB)| 5.2| 5.4| 5.7| 4.9| 2.8| 4.3| 3.5| 7.6
D: Assumed Protection (dB)| 8.8| 10.5| 9.1| 11.0| 12.7| 14.4| 15.8| 20.7
 | SNR| H| M| L
---|---|---|---|---
Mean Attenuation (Xм)| 18.2| 18.4| 15.9| 15.1
Standard Deviation (Xs)| 2.6| 2.9| 2.6| 3.6
Final| 16| 16| 13| 12

SNR = 16 dB, H = 16 dB, M = 13 dB, L = 12 dB. In accordance with EN ISO 4869-2 with the parameter ∝=1

TRIPLE FLANGE| Attenuation (dB) (re 20 µ PA)

Tested in accordance with EN352-2:2020

---|---
A: Frequency (Hz)| 63| 125| 250| 500| 1K| 2K| 4K| 8K
B: Mean Attenuation (dB)| 12.6| 14.1| 16.9| 16.4| 15.9| 19.0| 19.8| 28.8
C: Standard Deviation (dB)| 6.1| 4.9| 5.4| 3.9| 3.5| 3.2| 4.3| 7.2
D: Assumed Protection (dB)| 6.6| 9.3| 11.5| 12.4| 12.4| 15.8| 15.5| 21.6
 | SNR| H| M| L
---|---|---|---|---
Mean Attenuation (Xм)| 18.6| 18.8| 16.3| 15.8
Standard Deviation (Xs)| 2.5| 2.8| 2.6| 3.4
Final| 16| 16| 14| 12

SNR = 16 dB, H = 16 dB, M = 14 dB, L = 12 dB. In accordance with EN ISO 4869-2 with the parameter ∝=1

FOAM| Attenuation (dB) (re 20 µ PA)

Tested in accordance with EN352-2:2020

---|---
A: Frequency (Hz)| 63| 125| 250| 500| 1K| 2K| 4K| 8K
B: Mean Attenuation (dB)| 15.1| 15.0| 15.6| 14.6| 16.5| 20.1| 23.9| 31.0
C: Standard Deviation (dB)| 4.6| 5.1| 3.3| 2.6| 2.6| 3.2| 3.1| 5.2
D: Assumed Protection (dB)| 10.6| 9.9| 12.3| 12.0| 13.9| 16.9| 20.8| 25.8
 | SNR| H| M| L
---|---|---|---|---
Mean Attenuation (Xм)| 19.4| 20.5| 16.6| 15.4
Standard Deviation (Xs)| 1.5| 2.0| 1.7| 1.9
Final| 18| 19| 15| 13

SNR = 18 dB, H = 19 dB, M = 15 dB, L = 13 dB. In accordance with EN ISO 4869-2 with the parameter ∝=1

The Ear Tips have the following nominal diameters (mm).

Spare Parts List

Technical Data

Earplug Assembly

Materials:

Collar Unit

(LED window, Button cover, screws)

|

Plastics: ABS, TPE, PC Screw: Steel

Cable: Collar Unit to Earpieces| TPE

Environmental:

Mass & Dimensions:

Length / Width / Height

| Overall size (Collar Unit): 160mm x 160mm x 23mm Earpiece: 19mm x 17mm x 17.5mm
---|---
Weight

(without Ear Tips or Ear Hooks)

|

52g

Accessories

Materials

Power Charger (Supplied)

Earplug Operating Time

| Battery performance may deteriorate with usage and temperature. The expected period of continuous use is approximately 40hrs on a full charge. Frequent noise alerts and exposure alarms will impact operational use time.

Supplier Information
Minuendo AS. Nedre Slottsgate 2c. 0153 Oslo. Norway www.minuendo.com

Country of Origin
The Earplug is manufactured in Norway

Personal data
We process personal data in the Earplugs in accordance with the GDPR and the provisions of any other current privacy legislation. For more information about our personal data processing, please see our privacy policy which is available on www.minuendo.com/privacy.

Disclaimer, Warranty and Limitation of Liability

Disclaimer:

These Earplugs help reduce exposure to hazardous noise and other loud sounds. These Earplugs do not replace general advice issued by health authorities to safeguard ear health, and it is the user’s own responsibility to assess the need for ear protection. If the recommendations and directions provided in this Instruction Manual are not followed, the protection and function afforded by the Earplugs may be severely impaired. This may cause consequences for the user, such as hearing loss or injury, for which Minuendo AS shall not be responsible. Minuendo does not guarantee, represent or warrant that the use of the Earplugs will be neither uninterrupted, timely, secure or error-free, nor that the results that may be obtained from the use of the Earplugs will be accurate or reliable.
Minuendo AS does not represent or warrant that the Earplug is compatible with any specific third-party hardware or software other than expressly specified herein and further does not represent or warranty that any type of warning signals including communication with people in the surroundings can be heard and understood by the wearer of this hearing protection device. The sound characteristics of the warning signals as well as of the background noise can vary in different situations. Any attempt to disassemble the earplug may impact noise attenuation and earplug functionality. Customer understands and warrants that Customer has the responsibility to implement reasonable and appropriate security measures relating to the Earplug, the information used and the network environment, and that the use of the Earplug is at the Customer’s sole risk. This obligation includes complying with applicable security, cybersecurity standards, and best practices. Minuendo shall not be liable for damages caused by a security or Cybersecurity Event resulting from Customer’s failure to maintain reasonable and appropriate security measures. Customer is responsible for all such damages.

Warranty:
In the event any Minuendo AS Earplug is found to be defective in material, workmanship, or not in conformity with any express warranty for a specific purpose. Minuendo’s only obligation and your exclusive remedy shall be at Minuendo’s option, to repair, replace or refund the purchase price of such parts or products upon timely notification of the issue by you and substantiation that the Earplug has been stored, maintained and used in accordance with Minuendo written instructions. EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, OR THOSE ARISING FROM A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE, EXCEPT OF TITLE AND AGAINST PATENT INFRINGEMENT. Minuendo has no obligation under this warranty with respect to any Earplug that has failed due to inadequate or improper storage, handling or maintenance; failure to follow product instructions; or alteration or damage to the Earplug caused by accident, neglect or misuse.

Limitation of Liability:
LIMITED TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MINUENDO, OUR DIRECTORS, OFFICERS, EMPLOYEES, AFFILIATES, AGENTS, CONTRACTORS, INTERNS, SUPPLIERS, SERVICE PROVIDERS OR LICENSOR BE LIABLE FOR ANY INJURY, LOSS, CLAIM OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING, WITHOUT LIMITATION LOST PROFITS, LOST REVENUE, LOST SAVINGS, REPLACEMENT COSTS, OR ANY SIMILAR DAMAGES ARISING FROM YOUR USE OF THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, ANY ERRORS OR OMISSIONS IN ANY CONTENT, OR ANY LOSS OR DAMAGES OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ASSERTED. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE

References

• SUPPORT | Minuendo
• Minuendo | Lossless hearing protection earplugs
• PRIVACY | Minuendo
• SUPPORT | Minuendo
• Minuendo | Smart Alert earplug

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>