Led 2 Lighting KVADER WALL ANTHRACITE Light Instructions
- June 12, 2024
- Led 2 Lighting
Table of Contents
Led 2 Lighting KVADER WALL ANTHRACITE Light
Product Information
- Product Name: KVADER
- IP Rating: IP54
- Manufacturer: LED2
- Website: www.led2.eu
- Power Supply: 220-240V, 50/60Hz
Product Usage Instructions
CAUTION! Before proceeding with the installation, turn off the main power
to prevent possible shocks.
The installation should only be carried out by a technician or a qualified
person. Handle the lampshade/diffuser carefully as it is fragile. For lamps
with an integrated LED light source, replacement should only be done by a
technician or a qualified person. The manufacturer is not responsible for
incorrect use and assembly of its products.
PUSH DIM
- Connect the product to a power supply of 220-240V, 50/60Hz.
- Connect the L (Line) and N (Neutral) wires accordingly.
- Ensure the driver is correctly connected.
- Follow the instructions provided by the push dimmer for controlling the light intensity.
DALI/PUSH DIM
- Follow the same steps as for PUSH DIM.
- In addition, connect the DALI wires (DA/N and DA/L) accordingly.
DALI DIM
- Follow the same steps as for PUSH DIM.
- In addition, connect the DALI wires (DA DA) accordingly.
TRIAC DIM
- Follow the same steps as for PUSH DIM.
- In addition, connect the Phase cut Triac dimmer accordingly.
- Choose either trailing edge or leading edge dimming based on your dimmer’s specifications.
CAUTION! Before proceeding with the installation, turn off the main power to prevent possible shocks.
The installation should only be carried out by a technician or a qualified person. Handle the lampshade/diffuser carefully as it is fragile. For lamps with an integrated LED light source, replacement should only be done by a technician or a qualified person. The manufacturer is not responsible for incorrect use and assembly of its products.
The installation may only be carried out by a technician )
Instructions
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION! -Turn off the main power before proceeding with the installation
in order to prevent possible shock. The installa tion may only be carried out
by a technician or a qualified person. If the lamp has a lampshade/diffuser,
handle it carefully as it is fragile. With an integrated LED light source,
only a technician or a qualified person can make the replacement. The
manufacturer is not responsible for the incorrect use and assembly of its
products.
www.led2.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>