DELL P1424H Portable Monitor Instructions
- June 12, 2024
- Dell
Table of Contents
DELL P1424H Portable Monitor
Product Information
The DELL P1424H is a monitor that features a detachable base and panel for easy disassembly. It contains various components and materials that may require selective treatment for disposal or recovery.
USING INSTRUCTIONS
TEARDOWN INSTRUCTION
Tear the rubber
- Tear off the rubber attached to the lower cover of the bracket“1~2”
Remove the base screws
- ke the electric screwdriver and remove the base screws at positions “1~9”
- que of electric screwdriver: 1.1±0.1kgf.cm, Screwdriver head: star
Remove the mainboard screws
- Separate the lower cover of the bracket
- Take the electric screwdriver and remove the mainboard screws at positions “1~4”
- rque of electric screwdriver:1.1±
- 0.1kgf.cm, Screwdriver head: Cross
Separate mainboard
- Tack out the mainboard from the upper cover of the base
- Remove the cable hook, pull out the cable;
Remove the pwer button and menu button
- Remove the pwer button and menu button
Remove the front frame
- Remove the front frame in sequence with both hands at the same time
- der: sky side→right side→ground side →left side
Tear pull adhesive
- Tear off the pull adhesive at positions“1~3” (Clamp the pull glue with pliers and pull it out)
- Tack out the panel from the back cover
Separate panel
- Remove the cable hook, pull out the cable;
Remove the upper cover of base screws
- Take the electric screwdriver and remove the upper cover of base screws at positions “1~6”
- Torque of electric screwdriver: 1.1±0.1kgf.cm, Screwdriver head: Cross
- Separate the upper cover of the base
Remove the Hinge screws
- Take the electric screwdriver and remove the Hinge screws at positions “1~6”
- Torque of electric screwdriver: 1.1±0.1kgf.cm, Screwdriver head: Cross
Take out the cable
- Tack out the cable from the back cover
Product Material Information
The following substances, preparation, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/422/EEC.
| Capacitors / Condensers (containing PCB/PCT) | Not used |
|---|---|
| Mercury containing components | Not used |
| Batteries | Not used |
| Printed circuit boards (with surface greater than 10 square cm) | Product has |
printed circuit boards (with surface greater than 10 square cm)
Component contain toner, ink and liquids| Not used
Plastic containing BFR|
Component and waste contain asbestos| Not used
CRT| Not used
Component contain CFC, HCFC, HGC and HC| Not used
Gas discharge lamps| Not use
LCD display > 100 cm2| Product LCD greater than 100cm2
External electric cable| Product has external cables
Component contain refractory ceramic fibers| Not used
Component contains radio-active substances| Not used
Electrolyte capacitors (height > 25mm, diameter >25mm)| Product has
electrolyte capacitors (height > 25mm)
Tools Required
List the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Tool Description
- Screwdriver (Philip head with Φ5 mm & Φ3 mm)
- Screwdriver (Hexagonal to remove VGA connectivity)
- Soldering iron
- Knife
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>