TESA BNR 56221 Aluminium Tape Instructions
- June 12, 2024
- TESA
Table of Contents
TESA BNR 56221 Aluminium Tape
Product Information
Product Name: BNR 56221, 56223
Product Features:
- Product Description: Aluminium foil acrylic
- Technical Information (average values): The values in this section should be considered representative or typical only and should not be used for specification purposes.
- Product Construction: Aluminium foil acrylic
- Properties/Performance Values: High adhesion, In- and Outdoor use, Suitable for Glass, Metal, Steel
- Certificates: Certified according to DIN 4102 part 1 class A2 and B1
Disclaimer: For the latest information on this product, please visit http://l.tesa.com/?ip=56221
Product Usage Instructions
- Clean the surface where the BNR 56221 or 56223 will be applied.
- Ensure the surface is dry and free from dust or debris.
- Peel off the backing of the BNR 56221 or 56223 to expose the adhesive side.
- Carefully align the BNR 56221 or 56223 with the desired position on the surface.
- Press firmly on the BNR 56221 or 56223 to ensure proper adhesion.
- For outdoor use, make sure the surface is suitable for the BNR 56221 or 56223 adhesive.
- If necessary, trim the BNR 56221 or 56223 to fit the desired area.
- Refer to the product’s technical information for any specific usage guidelines or limitations.
- For any further information or assistance, please visithttp://l.tesa.com/?ip=56221 or contact our customer support.
Product Features
- Suitable for protecting, covering, insulating and repairing
- May also be used for roof and gutter repairs
- Temperature resistant from -40°C to +140°C
- Water-, oil- and grease-resistant
- Age-resistant
- High adhesive strength
Product Description
tesa® Aluminium tape is a special self-adhesive plumbers tape perfectly suited to quickly repair any metal surface, such as heating appliences or gutters.
Technical Information (average values)
The values in this section should be considered representative or typical only
and should not be used for specification purposes.
Product Construction
- Backing material aluminium foil
- Type of adhesive acrylic
- Total thickness 100 μm
Properties/Performance Values
-
Abrasion resistance no
-
Adhesive strength High adhesion
-
Area of use In- and Outdoor
-
Humidity resistance yes
-
Oil and grease resistance yes
-
Residue free removal no
-
Suitable surfaces Glass, Metal, Steel
-
Temperature resistance yes
-
Temperature resistance max. 140 °C
Temperature resistance min. -40 °C -
Tensibility 5 %
-
Tensile strength 15 N/cm
-
UV resistant yes
-
Waterproof yes
-
Writable no
Certificates
Certified according to
DIN 4102 part 1 class A2 and B1
For latest information on this product please visit http://l.tesa.com/?ip=56221
Product Information
tesa® Aluminium tape
Disclaimer
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All information and recommendations are provided to the best of our knowledge on the basis of our practical experience. Nevertheless tesa SE can make no warranties, express or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. Therefore, the user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be glad to support you.
For latest information on this product please visit http://l.tesa.com/?ip=56221
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>