TESA AHSSENA-IR AISI316 Traffic series Institutional Handle User Guide

TESA AHSSENA-IR AISI316 Traffic series Institutional Handle

Product Information

• Specifications:
  • Product Name: Institutional Handle Traffic Series
  • Material: AISI316 Stainless Steel
  • Finishes Available: White (BL), Black (NE), Titanium (TI)
  • Antimicrobial Coating: Yes, with 95% bactericidal potency
  • Certification: JIS Z 2801:2000

Product Usage Instructions

• Installation:
  • Identify the type of rosette or plate needed for your door.
  • Use the provided screws, bolts, and Allen key to install the handle securely.
  • Ensure proper alignment and fit before tightening all fasteners.
• Maintenance:
  • Clean the handle regularly with a mild soap and water solution.
  • Avoid using harsh chemicals or abrasive materials that may damage the finish.
  • Check for any loose screws or bolts periodically and tighten as needed.
• Security Features:
  • The handle design provides resistance to pitting corrosion and enhances security.
  • Special screws are used to prevent easy tampering or removal of the handle.
• Antimicrobial Coating:
  • The antimicrobial coating on the handle reduces bacterial growth by 95%.
  • This feature makes the handle ideal for use in hospitals, healthcare facilities, and other high-traffic areas.

FAQs

• Q: Are these handles suitable for heavy-duty use?
  • A: Yes, these handles are designed for heavy-duty use with an axial pull resistance of 1000 Nw.
• Q: How should I clean the handle with an antimicrobial coating?
  • A: Clean the handle regularly with a mild soap and water solution to maintain the antimicrobial properties.

Institutional handle Traffic series

Certification

• JIS Z 2801: 2000

Laboratories that certify it:

• Tecnalia (San Sebastian)
• University of Pavia (Italy)
• Law Laboratories Ltd. (England)
• Sabater Institute (Barcelona)
• Chelab Laboratory (Italy)
• University of Navarra (Spain)

Traffic series AISI 316L

In the development of Traffic handles, TESA ASSA ABLOY has applied an innovative methodology regarding the design for new products. After intensive market research, the original aesthetics of these handles has been a consequence of the product codes and trends shown by the different actors in the high-range and quality handles market.

Resistance

• The driving mechanism of the handle is covered by acetate resin which prevents the break of the spring due to corrosion and also guarantees more than 1.00.000 cycles of working order.
• The springs are compression kind (as shock absorbers in the car) so the hollows are grooved; we achieve like that the system still works even if in the supposed case of spring breakage due to fatigue.
• Very high resistance to breakage and free movement as a consequence of the system of springs dragging by a nut with two cotter pins.
• Suitable for RF doors

Security

• The mechanism is fixed to the handle and escutcheon through a screw.
• We remove like this the clip used by all the handles in the market, the most frequent failure that lets us with the handle on the hand.
• This system is like a ‘sandwich’, all pieces are joined by a special screw (M14x1) that guarantees that we will never keep the handle in the hand.

Flexibility

• The rose models have 8 different crossing points for the coach screws, which makes them compatible with most of the locks in the market. At the same time Kubika and Obbal can be assembled with TESA ASSA ABLOY antipanic exit devices ranges Universal, Push and Top.
• Easy to reverse that helps convert simply one right handle into a left handle and viceversa.

High-quality materials

• These handles are manufactured in AISI 316L stainless steel, also known as ‘marine steel’ due to its excellent behaviour in aggressive and saline environments.
• Austenitic molybdenum steel with a low carbon content (18% chromium, 11% nickel, 2% molybdenum). Molybdenum protects stainless steel from pitting corrosion, common in industrial and nearshore environments.
• Finishes: All Traffic handles are available in IS16, Black and Antimicrobial finishes.

Traffic series

Institutional stainless Traffic series

Sena-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, 1 8×105 mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 5 floating through bolts, 5 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Institutional handle Traffic series

Vector-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover,
  1. 8×105 mm spindle, 2 recoil springs, 4 coach screws,
  2. bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 5 floating through bolts, 5 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Cubo-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle,2 recoil springs, 4 coach screws, 2 through bolts, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 through bolts, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 through bolts, 4 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Xara-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle,2 recoil springs, 4 coach screws, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 coach spindle, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm square, 2 recoil springs, 5 floating through bolts, 5 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Zafira-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 5 floating through bolts, 5 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Hamat-I Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 2 coach screws, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 2 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 5 floating through bolts, 5 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Tundra Inox AISI 316L

• The pack with a rosette includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle,2 recoil springs, 4 coach screws, 2 through bolts, 2 bolts and an Allen key.
• The pack with a long plate includes
  • A set of handles with an internal plate and a cover, a 8×105 mm spindle, 2 through bolts, 2 recoil springs, 4 coach screws, 2 bolts and an Allen key, 2 floating through bolts.
• The pack with a squared plate includes
  • A set of handles with a 1’5 mm-thick internal plate and a cover, a 8×105 mm spindle, 2 recoil springs, 4 through bolts, 4 screws, 2 bolts and an Allen key.
• Functions
  • Entrance: keyhole at 85, 72, 70 and 47 mm.
  • Privacy: deadbolt at 85, 72, 70 and 47 mm.
  • Passage.

Knob Inox AISI 316L Functions

• Entrance: keyhole at 85, 72, 70 and 47 mm.
• Privacy: deadbolt at 85, 72, 70 and 47 mm.
• Passage.

Institutional handle

Traffic series: complements

Round keyhole

• Packaging includes:
  • A set of supporting pieces and covers.
  • 4 screws.
• Finish
  • IS16, BL, NE, TI, AM

Round keyhole

• Packaging includes:
  • A set of supporting pieces and covers.
  • 4 screws.
• Finish
  • IS16, BL, NE, TI, AM

Blind

• Packaging includes:
  • A set with support pieces and covers.
  • 4 coach screws.
• Finish
  • IS16, BL, NE, TI, AM

Square thumb turn

• Packaging includes:
  • A set of supporting pieces and covers.
  • A 6 x 52 mm spindle
  • 4 screws. Finish
  • IS16, BL, NE, TI, AM

Round thumb turn

• Packaging includes:
  • A set of supporting pieces and covers.
  • A 6 x 52 mm spindle
  • 4 screws. Finish
  • IS16, BL, NE, TI, AM

Institutional lever set for emergency exits

Traffic series EN179: 2008

Sena-I 179 Main features

• Up to 200 kg doors
• Unlock capacity < 70 N
• Durability 200.000 cycles
• E Fire resistance (integrity), I (isolation), B grade
• This product is certified as a set with CF60 (9 mm spindle) ; 2035T, 2037F and 4039T (8 mm spindle); as well as 2240BA and 2230PA.

The pack with a long plate includes:

• A set of handles with an internal plate and a cover, a split spindle (8 or 9mm), 2 recoil springs, 6 coach screws, 3 bolts and an Allen key.

The pack with a square plate includes:

• A set of handles with 1,50 thickness square plates, a split spindle (8 or 9mm), 2 recoil springs, 10 coach screws, 5 bolts and an Allen key.

The pack with rosette includes:

• A set of handles with an internal plate and a D50 cover, a split spindle (8 or 9mm), 2 recoil springs, 4 coach screws, 2 bolts and an Allen key.
• CF60. 9 mm follower. Reversible.
• 2035T. 8 mm follower. Handed. No cylinder, for free passing door. 2037F. 8 mm follower reversible (non-handed). Valid for outside handle locking cylinder. 4039T. 8 mm follower. Handed. Cylinder required for external door opening.
• 2240BA. Single point. 8mm follower. Handed.
• 2230PA. Multiple points.8mm follower. Handed. Solution for single-leaf doors only.

Institutional lever set for emergency exits

Traffic series EN179: 2008

Cubo-I 179 Main features

• Up to 200 kg doors
• Unlock capacity < 70 N
• Durability 200.000 cycles
• E Fire resistance (integrity), I (isolation), B grade
• This product is certified as a set with CF60 (9 mm spindle); 2035T, 2037F and 4039T (8 mm spindle); as well as 2240BA and 2230PA.

The pack with a long plate includes:

• A set of handles with an internal plate and a cover, a split spindle (8 or 9mm), 2 recoil springs, 6 coach screws, 3 bolts and an Allen key.

The pack with a square plate includes:

• A set of handles with 1,50 thickness square plates, a split spindle (8 or 9mm), 2 recoil springs, 10 coach screws, 5 bolts and an Allen key.

The pack with rosette includes:

• A set of handles with an internal plate and a D50 cover, a split spindle (8 or 9mm), 2 recoil springs, 4 coach screws, 2 bolts and an Allen key.
• CF60. 9 mm follower. Reversible.
• 2035T. 8 mm follower. Handed. No cylinder, for free passing door.
• 2037F. 8 mm follower is reversible (non-handed). Valid for outside handle locking cylinder.
• 4039T. 8 mm follower. Handed. Cylinder required for external door opening.
• 2240BA. Single point. 8mm follower. Handed.
• 2230PA. Multiple points. 8mm follower. Handed. Solution for single-leaf doors only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>