CORSAIR ST100 RGB Premium Headset Stand with 7.1 Surround Sound User Guide
- June 12, 2024
- Corsair
Table of Contents
CORSAIR ST100 RGB Premium Headset Stand with 7.1 Surround Sound
Product Information
- Product Name: CORSAIR ST100 RGB Headset Stand with 7.1 Surround Sound
- Package Contents:
1. The CORSAIR ST100 RGB headset stand
2. B USB 3.1 cable, 1.8m (power & data)
3. C Quick start guide- Product Details:
1. A RGB LED (1 zone)
2. B RGB LEDs (8 zones)
3. C USB 3.1 port (Gen 1)
4. DUSB 3.1 port (Gen 1)
5. And 3.5mm headset jack
6. F USB to PC Micro-B port (power & data)PACKAGE CONTENTS
- A CORSAIR ST100 RGB headset stand
- B USB 3.1 cable, 1.8m (power & data)
- C Quick start guide
PRODUCT DETAIL
- A RGB LED (1 zone)
- B RGB LEDs (8 zones)
- C USB 3.1 port (Gen 1)
- D USB 3.1 port (Gen 1)
- E 3.5mm headset jack
- F USB to PC Micro-B port (power & data)
GETTING STARTED
Connect the included USB 3.1 cable to the USB to PC Micro-B port on the back of the ST100 RGB headset stand. Connect the opposite end to a USB port on your PC. After connecting to your PC, we recommend installing the CORSAIR Utility Engine (CUE) to ensure you have the latest firmware and drivers.
USB 3.1 PORTS
Two high speed USB 3.1 (Gen 1) ports are included. These ports are backwards-
compatible with all USB 2.0 devices.
Note: In order to realize USB 3.1 performance, the USB port on your PC must also support USB 3 or higher specifications. Otherwise, performance is limited to the USB specifications of your PC.
3.5MM HEADSET JACK
A 3.5mm headset jack provides compatibility with any headset or headphone that
has a 3.5mm analog connector. 7.1 virtual surround sound can be enabled using
the CORSAIR Utility Engine (CUE).
RGB LIGHTING CONTROL
A total of 9 fully customizable RGB LED zones are available using the CORSAIR
Utility Engine (CUE).
- Go to corsair.com/support/downloads to download the CORSAIR Utility Engine (‘CUE’) Software.
Using the CUE software will enable the full feature set of the ST100 RGB headset stand.
Note: if the stand is used without software, some features will be disabled.
- Install the software on a PC running Windows 10, Windows 8, or Windows 7.
- After installation is complete, reboot your PC, and launch CUE.
You can use it to:
- Choose your RGB color preference and light intensity
- Select and customize audio equalizer (EQ) settings
- Set 7.1 surround sound on or off
The software’s built-in documentation explains how to use the ST100 RGB headset stand’s features in greater detail.
Environmental protection
After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies:
- Electrical and electronic devices may not be disposed of with domestic waste.
- Consumers are obligated by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose of point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
EMAIL
[email protected]
WEB
corsair.com
BLOG
corsair.com/blog
FORUM
forum.corsair.com
FACEBOOK
facebook.com/Corsair
TWITTER
twitter.com/Corsair
YOUTUBE
youtube.com/Corsair
© 2017 CORSAIR Components, Inc. All rights reserved.
CORSAIR and the sails logo are registered trademarks, and CORSAIR Gaming and
the CORSAIR Gaming logo are trademarks of CORSAIR in the United States and/or
other countries. All other trademarks are the property of their respective
owners. Product may vary slightly from those pictured.
CORSAIR COMPONENTS, INC.
47100 BAYSIDE PARKWAY • FREMONT • CALIFORNIA • 94538 • USA
References
- corsair.com
- Corsair Blog - Corsair Community
- PC Components | Gaming Gear | CORSAIR
- Home - Corsair Community