WRAP WRENCH B00JE3S0SI Professional Sports and Medical Wrap and Bandage Roller Instruction Manual
- June 4, 2024
- WRAP WRENCH
Table of Contents
WRENCH B00JE3S0SI Professional Sports and Medical Wrap and Bandage Roller
Instruction Manual
B00JE3S0SI Professional Sports and Medical Wrap and Bandage Roller
Instruction Manual 6 Volt (DC) Cordless Professional Wrap Roller 200 RPM Motor
21752 Pacific Coast Hwy. #15 Huntington Beach, CA 92646
www.WrapWrench.com
Requires 4 AA Batteries. (Batteries Not Included)
Please keep this instruction manual for future reference
Read All Safety Instructions Before A Operating The Wrap Wrench
Safety Instructions
Cautions: When using power tools, the following basic safety measures should be followed to reduce and/or eliminate the risk of injury. Read and carefully observe these instructions while using the device.
-
Maintain Safe Working Environment. Never expose power tools to rain or moisture and do not use power tools in moist or wet environments. Ensure that there is good lighting. Do not use power tools in the vicinity of combustible liquids or gases. Disorder in the working area increases the risk of accidents.
-
Prevent Electric Shocks. Avoid body contact with grounded parts, e.g. pipes, radiators, stoves, or refrigerators.
-
Keep Power Tools Away From Children. Do not let other people touch the tool or the power cable during operation and keep people out of your work area.
-
Store Tools In a Safe Place. Unused tools should be stored in a dry. the secure area where children cannot reach them.
-
Select The Proper Tool For The Task. Do not use tools for any purpose other than those for which they were intended. The tool will operate more efficiently and safely in the specified performance range. Do not use any tools or attachments which are not suited for the work.
-
Wear Appropriate Work Clothes. Do not wear any loose-fitting clothing or jewelry (they could get caught up in moving parts). For outdoor work, it is recommended that you wear rubber gloves and non-slip footwear. If you have long hair, wear a hairnet.
-
Wear Safety Glasses In addition to safety glasses. when performing any work which generates dust, use a breathing mask.
-
Do Not Incorrectly Use The Power Cable. Do not carry the tool by the power cable and do not use the power cable to pull the plug out of the socket. Protect the power cable from heat. oil, and sharp edges.
-
Secure The Work-Place. Use clamping devices or vice in order to hold the workpiece in a secure position which allows you to operate the tool with both hands.
-
Do Not Over Reach Or Stretch Beyond Your Standing Area. Avoid any abnormal postures. Ensure that you are standing securely and keep your balance at all times while operating a power tool.
-
Properly Maintain Your Tools. Keep your tools ready for use (e.g. sharp and clean) in order to assure proper operation. Follow the maintenance regulations and the instructions for tool changes. Check the plug and the cable regularly and if these are damaged. have them replaced by a recognized electrical specialist. Always keep handles dry and free from oil and grease.
-
Avoid Any Unintentional Operation Or Starting-up Of The Device.
-
Do not place your finger on the switch when carrying tools connected to the power supply. Make sure that the switch is off when connecting the device to the power supply.
-
Be Alert. Observe your work. Proceed seriously. Do not use the tool if you are physically or mentally impaired in any manner.
-
Check Your Tool For Damage. Before using the tool, carefully check the protective devices for problem-free operation and intended function. Verify there are no damaged parts. Check whether the function of moving parts is in order, whether they stick and whether parts are damaged.
• ALL DAMAGED DEVICES AND PARTS MUST BE PROPERLY REPAIRED OR REPLACED BY A CUSTOMER-SERVICE WORKSHOP PRIOR TO “TOOL USE” NEVER USE TOOLS AND SWITCHES WHICH CAN NOT BE SWITCHED ON AND OFF. -
Repairs Only By An Electrical Specialist. This power tool complies with all known safety regulations. Only an electrical specialist may carry out repairs.
-
Use only accessories and additional devices which are specified in the operating instructions or are recommended by the tool manufacturer. The use of any insert tools or accessories other than those recommended in the operating instructions increases the risk of injury.
Technical data
| No load speed | 200 RPM |
|---|---|
| Voltage(DC) | 6V(DC) |
| Bit Size | 2 1/2 |
Approximately 3 hours of continuous run time using NiCad or rechargeable batteries.
Functions:
LIMITED WARRANTY
Wrap Wrench will guarantee your Wrap Wrench product for 6 months from the date
of original purchase against defects in workmanship and material. If a defect
arises, send the Wrap Wrench product FREIGHT PREPAID to the address under
Warranty Services. Send a copy of the original receipt showing where and when
the Wrap Wrench was purchased. Batteries are NOT covered under the warranty.
We Will Not Warrant Product:
- If alterations or modifications have been made.
- If unauthorized repairs have been made or attempted.
- If the damage is caused by mistreatment or accident.
Wrap Wrench 1 Patent US D716,123SI
Copyright©20211
All Rights Reserved