SelectBlinds Natural Cordless Top Down Bottom Up Woven Wood Shades Instruction Manual
- June 12, 2024
- SelectBlinds
Table of Contents
SelectBlinds Natural Cordless Top Down Bottom Up Woven Wood Shades
Product Information
The Cordless Woven Natural Shade is designed to provide a safer shading solution for children and pets. It features a double cording system on the back to minimize the risk of entanglement. Made with materials harvested from nature, each shade is unique with variations in color, grain, texture, striations, and warping. Over time, exposure to light will soften and slightly darken the shade’s color. Small cracks in bamboo slats are natural and unavoidable.
Installation Instructions
-
Step 1: Check Package Contents
Ensure all parts are included. If any part is missing, contact customer support at 1-800-264-1190. -
Step 2: Tools Required
You will need a screwdriver, tape measure, pencil, drill, and a step ladder. -
Step 3: Bracket Location and Installation
For Outside Mounting:
- Place a bracket on both ends of the head rail (and one in the center for larger shades).
- Hold the shade level at the desired height and center it over the window opening.
- Mark the exact location of each bracket with a pencil.
- Remove the brackets from the head rail and position them at the marked locations.
- Mark the location of each screw hole with a pencil.
- Predrill the screw holes with a 3/32 drill bit.
- Screw each bracket into the wall or window molding using the provided screws.
For Inside Mounting:
- Place a bracket on both ends of the head rail (and one in the center for larger shades).
- Hold the shade in place and make a pencil mark at the rear of each bracket where it contacts the inside of the window frame.
- Remove the brackets from the head rail and align them with the marks.
- Mark the location of each screw hole with a pencil.
- Predrill the screw holes with a 3/32 drill bit.
- Attach each bracket using the provided screws.
Important:
Always push and pull the shade from the center to ensure the bottom remains
parallel to the top. For wider shades (>48), use two hands, shoulder width
apart or wider. If the shade becomes uneven, pull it down completely and then
lift it to the desired position. If needed, manually pull the cording slowly
out of the head rail from behind until the bottom of the shade is level.
Cleaning Your Shades
Use a feather duster or vacuum with a soft brush attachment to clean your
shades.
Replacement Parts
In case you need replacement parts, please refer to customer support for
assistance.
Limited Lifetime Warranty
The Cordless Woven Natural Shade is covered by a limited lifetime warranty
for the original residential retail purchaser as long as the product remains
in the original window.
Cordless Woven Natural Shade
Cords and bead chains can loop around a child’s neck and strangle.
- Always keep cords and bead chains out of children’s reach.
- Move furniture away from cords and bead chains. Children can climb furniture to get to cords.
- Do not tie cords together. Make sure cords do not twist together and create a loop.
IMPORTANT INFORMATION ABOUT YOUR ROMAN STYLE NATURAL SHADE
This product is designed to make your shade safer for children and pets.
However, this shade is substantially different than the traditional shades
that you might be accustomed to. This shade has a double cording system on the
back of the shade to help minimize the possibility of a child or pet becoming
entangled in the cords.
See the operating instructions toward the back of this handbook for additional
information about the function of your shade.
Color, Materials and Characteristics:
Your woven natural shade is made with materials harvested from nature. Each
harvest of natural fibers is unique and will have variations in color, grain,
texture, striations and warping. As a result of these inherent qualities, no
two shades are identical, nor can they be. Over time, exposure to light will
soften and slightly darken the color of the shade. Small cracks in bamboo
slats are natural and unavoidable.
INSTALLATION INSTRUCTIONS
Step 1. Check Package Contents Missing part? Call
1-800-264-1190
Mounting hardware kit includes the following:
Part
Quantity
Mounting Bracket 2 (up to 54”
wide)
( includes washer & wing nut) 3 (55” To 72” wide)
1” Screws 4 per
bracketStep
Tools Required
Screwdriver, tape measure, pencil, drill, step ladderUse a 3/32” drill bit to predrill screw holes. Use a
¼” drill bit for wall anchors.
Step 3. Bracket Location and Installation
Your shade may be installed either inside the window frame or outside the
window frame.
For Outside Mounting
Place a bracket on both ends of the head rail (and one in the center for
larger shades). Hold the shade level at the height desired and center it over the window opening – mark
the exact location of each bracket with a pencil. Remove the brackets from the
head rail and position each bracket at the marked location. Mark the location
of each screw hole with a pencil.
Predrill the screw holes with a 3/32” drill bit. Screw each bracket into the
wall or window molding using the 1” screws.
For Inside Mounting:
Place a bracket on both ends of the
head rail (and one in the center for larger shades). Hold the shade in place
and make a pencil mark at the rear of each bracket where it contacts the
inside of the window frame. Remove the brackets from the head rail and align
them with the marks. Mark the location of each screw hole with a pencil.
Predrill the screw holes with a 3/32” drill bit. Attach each bracket using the
1” screws.
Step 4. Securing the Head Rail
Lift the head rail into position – place a washer and wing nut on the post of
each bracket – tighten by hand.
Step 5. How to Operate
To lower shade: hold the center of the bottom of the shade and pull downward
slowly until the shade reaches the desired level. To lift shade: place your
hand (palm facing up) under the bottom of the shade and push upward slowly –
if the shade material bunches-up, stop momentarily and then continue pushing
upward – do this repeatedly if necessary until the shade reaches the desired
height.
IMPORTANT
Always push and pull at the center of the shade to assure that the bottom of
the shade remains even (i.e. parallel to the top of the shade). For wide
shades (>48”) use two hands, shoulder width apart or wider.
If the shade becomes uneven, slowly pull it all the way down, and then lift to
the desired position. If necessary, reach behind the shade and manually pull
the cording slowly out of the head rail until the bottom of the shade is
level.
CLEANING YOUR SHADES
Use a feather duster or vacuum using the soft brush attachment.
REPLACEMENT PARTS
In the event that replacement parts are ever needed ,you may call:
1-800-264-1190 Please be sure to
provide the following information, if possible:
- The complete model or catalog number of your product
- A description of the product
- A description of the part needed
LIMITED LIFETIME WARRANTY
The enclosed product is warranted to the original residential retail purchaser as long as the product remains in the original window.
Covered
Lifetime: Entire product against manufacturing defects (i.e. a flaw in the
product design, materials, or workmanship that causes the product to no longer
function)
3 years
Cords including internal cords such as those found in cordless blinds.
5 years
All fabric
Not Covered:
Normal Wear and Tear Any product that fails due to:
- exposure to salt air
- improper installation
- accident
- extraordinary use
- improper operation
- alterations
- improper cleaning
- misapplication
- damage from pests/insects/pets
- improper handling
- misuse Natural wood products that have:
- loss of color intensity
- yellowing or cracking of plastic parts or foam wood product
- variations in color, grain, or texture
- warping of wood slats in high humidity areas
Costs associated with
- product removal
- transportation to and from the retailer
- brand label removal
- product remeasure
- incidental or consequential damages
- product reinstallation
- shipping
In the event there are multiple blinds/shades in the same room, only the defective blind/shade will be replaced.
To Report Shipping Damage
If damage occurred during shipping, call place of purchase and report within 7
calendar days or else you may be denied credit for your damaged product.
To Obtain Service
If you suspect this product has a manufacturing defect in materials or
workmanship:
- Locate the sales receipt
- Call place of purchase
Any unauthorized returns will not be accepted.
Warranty Remedy
THIS SHALL BE YOUR SOLE REMEDY UNDER THIS LIMITED
WARRANTY.
If this product is found to have a manufacturing defect in materials or
workmanship, we will (at our discretion) do one of the following
- repair the product
- replace the product
- refund the cost of the product
Colors vary from lot to lot and may not exactly match sample swatch or previous purchases. Discontinued items or color selections will be replaced with the closest equivalent current product.
YOUR RIGHTS UNDER STATE LAW
This lifetime limited warranty gives you specific legal rights, and you may
have other rights, which vary from state to state. Some states do not allow
limitations on how long a warranty lasts, so the above limitations may not
apply to you. No agent, representative, dealer, or unauthorized employee has
the authority to increase or alter the obligation of this warranty. This
lifetime limited warranty supersedes any previous versions.
For all questions, please call
800-264-1190 Hours of operation are
8:00am to 5:00pm CST
LIMITED LIFETIME WARRANTY
The enclosed product is warranted to the original residential retail purchaser
as long as the product remains in the original window.
Covered:
Lifetime: Entire product against manufacturing defects (i.e. a flaw in the
product design, materials, or workmanship that causes the product to no longer
function)
3 years
- Cords including internal cords such as those found in cordless blinds.
5 years:
- All fabric
5 Years:
- Battery Operated Motors
Not Covered:
- Normal Wear and Tear
Any product that fails due to
- abuse
- exposure to salt air
- improper installation
- accident
- extraordinary use
- improper operation
- alterations
- improper cleaning
- misapplication
- damage from pests/insects/pets
- improper handling
- misuse
Natural wood products that have
- yellowing or cracking of plastic parts or foam wood product
- variations in color, grain, or texture
- warping of wood slats in high humidity areas Costs associated with:
- product removal
- transportation to and from the retailer
- brand label removal
- product remeasure
- incidental or consequential damages
- product reinstallation
- shipping
In the event there are multiple blinds/shades in the same room, only the defective blind/shade will be replaced.
To Report Shipping Damage
If damage occurred during shipping, call place of purchase and report within 7
calendar days or else you may be denied credit for your damaged product.
To Obtain Service
If you suspect this product has a manufacturing defect in materials or
workmanship:
- Locate the sales receipt
- Call place of purchase
Any unauthorized returns will not be accepted.
Warranty Remedy
THIS SHALL BE YOUR SOLE REMEDY UNDER THIS LIMITED
WARRANTY
If this product is found to have a manufacturing defect in materials or
workmanship, we will (at our discretion) do one of the following
- repair the product
- replace the product
- refund the cost of the product
Colors vary from lot to lot and may not exactly match sample swatch or previous purchases. Discontinued items or color selections will be replaced with the closest equivalent current product.
YOUR RIGHTS UNDER STATE LAW
This lifetime limited warranty gives you specific legal rights, and you may
have other rights, which vary from state to state. Some states do not allow
limitations on how long a warranty lasts, so the above limitations may not
apply to you. No agent, representative, dealer, or unauthorized employee has
the authority to increase or alter the obligation of this warranty. This
lifetime limited warranty supersedes any previous versions.
For all questions, please call
800-264-1190 Hours of operation are
8:00am to 5:00pm CST
Motorized Woven Natural Shade
Installation & Operating Instructions
INSTALL THE SHADE BEFORE ATTEMPTING TO OPERATE THE MOTOR.
Cords and bead chains can loop around a child’s neck and strangle.
- Always keep cords and bead chains out of children’s reach.
- Move furniture away from cords and bead chains. Children can climb furniture to get to cords.
- Do not tie cords together. Make sure cords do not twist together and create a loop.
IMPORTANT INFORMATION ABOUT YOUR ROMAN STYLE NATURAL SHADE
This product is designed to make your shade safer for children and pets.
However, this shade is substantially different than the traditional shades
that you might be accustomed to. This shade has a double cording system on the
back of the shade to help minimize the possibility of a child or pet becoming
entangled in the cords.
See the operating instructions toward the back of this handbook for additional
information about the function of your shade.
Color, Materials and Characteristics
Your woven natural shade is made with materials harvested from nature. Each
harvest of natural fibers is unique and will have variations in color, grain,
texture, striations and warping. As a result of these inherent qualities, no
two shades are identical, nor can they be. Over time, exposure to light will
soften and slightly darken the color of the shade. Small cracks in bamboo
slats are natural and unavoidable.
INSTALLATION INSTRUCTIONS
Step 1. Check Package Contents Missing part? Call
1-800-264-1190
Mounting hardware kit includes the following:
Part
Quantity
Mounting Bracket 2 (for shades up to 48”
wide)
( includes washer & wing nut) 3 (for shades up to 72” wide)
11/8” Screws 4 per bracket
Radio Frequency Remote 1
Wall Holder for Remote 1
Wallboard or Plaster: use anchors specifically designed for hollow walls (not included). Concrete, Stone, Brick: use a masonry drill bit and anchors or screws specifically designed for masonry (not included).
Step 2. Tools Required
Screwdriver, tape measure, pencil, drill, step ladder, spirit level. Note: use a 3/32” drill bit to pre-drill the screw holes (for attachment to a wall stud or header board). Use Wall Anchors (not included) for hollow dry wall or plaster mounting
Step 3. Bracket Location and Installation
Your shade may be installed either inside the window frame or outside the
window frame.
For Outside Mounting
Place a bracket on both ends of the head rail (and one in the center for
larger shades – note that the center support bracket has a shorter post than
the outer brackets). Hold the shade at the height desired and center it over
the window opening. The brackets must be level – use a Spirit Level if
necessary to assure proper alignment. Mark the exact locationof each bracket
with a pencil. Remove the brackets from the head rail and position each
bracket at the marked location. Mark the location of each screw hole with a
pencil. Predrill the screw holes with a 3/32” drill bit. Screw each bracket
into the wall or window molding using the 11/8” screws.
For Inside Mounting:
Place a bracket on both ends of the head rail (and one in the center for
larger shades – note that the center support bracket has a shorter post than
the outer brackets).
Hold the shade in place and make a pencil mark at the rear of each bracket
where it contacts the inside of the window frame. Remove the brackets from the
head rail and align them with the marks. Mark the location of each screw hole
with a pencil. Predrill the screw holes with a 3/32” drill bit. Attach each
bracket using the 11/8” screws.
Step 4.
Securing the Head Rail Lift the head rail into position – place a washer
and wing nut on the post of each bracket – tighten by hand.
Step 5.
IMPORTANT FINAL STEP BEFORE OPERATION Remove the Tape From the Roller Tube –
Carefully peel off the tape covering the lift cords on the tube (see
illustration) Step 6.
- Operating the Shade
PROGRAMMING AND OPERATION OF \RADIO TECHNOLOGY MOTORS
Activating the motor: Press the program button for 1 second – the Red
indicator light will flash – the motor is now “ON” IMPORTANT
The Upper & Lower limit positions (full UP & DOWN positions) have been pre-
set at the factory – also, a Channel Number has been assigned to each shade –
therefore, it is not necessary to perform Steps 1, 2 & 3 below – however, we
recommend that you read these to familiarize yourself with the basics of
programming the motor and remote control and to fully understand the function
of your motorized shade. Also, note that the batteries in the motor are fully
charged at the factory prior to shipment.
-
Channel Selection for Each Shade
When you receive your shades the channel number pre-assigned to each shade will be marked on the shade and/or carton. Per the notice above, it is not necessary to perform Steps 1, 2 &3 as these settings are done at the factory and will require no adjustment under normal circumstances. A channel number must be assigned to each motor/shade. The assigned numbers should be sequential starting with #1 (1, 2, 3 etc.). Press the channel buttons/arrows to select a dedicated channel for each shade prior to mating each shade/motor to the remote controller. -
Programming/Mating
REMINDER: the motor and remote have been pre-set at the factory – programming information for Steps 1, 2 & 3 is provided as background information only.
Identify the head of the motor housing on the left side of the shade (see drawing) – Press the PROGRAM button until the shade oscillates (the shade will oscillate – a quick back and forth movement of the shade) Press the UP button on the remote (see drawing) – the shade will oscillate again – the motor and transmitter are now mated. -
Setting UP and DOWN Limit Positions NOTE
Upper and lower limit positions have been pre-set at the factory – programming information for Steps 1, 2 & 3 is provided as background information only.
Set the UP position
Move the shade 6” to 10” below the desired upper limit by pressing the UP or DOWN arrows/buttons on the remote. Press the PROGRAM button on the back of the remote – the motor will oscillate – this puts the motor in program mode. Now move the shade up to the desired UP position and press the program button again – the motor will oscillate and the upper limit is now set.
Set the DOWN position
Move the shade down from the upper limit position to a point 6” to 10” from the bottom, and then press the PROGRAM button on the back of the remote – the motor will oscillate and is once again in program mode.
Now move the shade to the desired DOWN position and press the PROGRAM button the motor will oscillate and the lower limit is now set.
NOTE: after all limits are set, see the remote control operating instructions below. -
Setting Intermediate Positions & Other Settings
Setting INTERMEDIATE positions Up to (4) intermediate positions can be set. Move the shade at least 6 inches away from the previously set limits – press the PROGRAM button on the rear of the remote – the motor will oscillate and is now in program mode. Now move the shade to any desired intermediate STOP position and press the PROGRAM button again – the motor will oscillate and the intermediate STOP position is now set. Repeat this process to set additional intermediate STOP positions. When setting a limit, if there is no action within 30 seconds, the motor
Remote Transmitters
will automatically exit the limit programming mode. Limit Position Fine Tuning: move the shade to the limit position that you wish to adjust. Press the program button on the rear of the remote – the motor will oscillate and is now in limit setting mode. Use the UP/DOWN buttons on the remote to establish a new position – press the program button on the rear of the remote – the motor will oscillate and the fine-tune setting is now complete.
Erasing Limits
Note: the 1st/Upper limit cannot be erased – it can only be eliminated by
deleting all memory
Move the shade to the limit position that you wish to erase – press and hold
the PROGRAM button on the rear of the remote for approximately 7 seconds – the
motor will oscillate twice, and the limit has been erased.
Deleting Memory
To Delete All Memory: Press the program button on the head of the motor 4
times (@ one second intervals), press once, wait for the LED to flash RED –
press a 2nd time, wait for a flash – press the 3rd time, wait for 2 flashes –
press the 4th time, wait for 2 flashes, the motor will oscillate. All memory
is now erased. Deleting Memory for a Single Channel: Set the remote
transmitter on the channel to be deleted. Press the STOP button for
approximately 5 seconds – the motor will oscillate. Now press the program
button on the rear of the remote – the motor will oscillate and the single
channel is deleted
Using the Remote Control Transmitter
Press the UP/DOWN button once and the shade will move to the next pre-set
limit position. Press the UP/DOWN button twice at the speed of once per second
and the shade will move to the UP or DOWN limit position without stopping at
any intermediate position. When the up position has been reached, the UP
button becomes non-functional, and when the down position has been reached the
DOWN button becomes non-functional.
Controlling Multiple Shades Simultaneously
6 Channel Remote: press the channel selector until all six lights are lit to
control up to 6 shades at the same time using the remote control as described
above.
16 Channel Remote: press the channel selector button until “CC” appears in the
display window to control up to 16 shades at the same time using the remote
control as described above.
Operating the Shade
To raise and lower the shade, use the remote control as described above.
Charging the Batteries
Connect the AC Charger to the Charger Cable attached to the motor head –
charge for 8 hours.
NOTE:
Each battery/motor should be charged at least once every 6 months.
Installation/Replacement of the Remote Control
Battery Remove the cover on the rear of the remote by removing the screw
and sliding the back plate upward slightly – install a 3V [CR2032] disk type
battery as illustrated.
Installation of Optional Wall Mount Holder
Attach the remote holder using the screws provided (use wall anchors for
hollow dry wall), or peel the foil off the adhesive pad on the back of the
remote holder and press it into place on any clean flat surface.
CUSTOMER SERVICE
1-800-264-1190 General Safety
Instructions for Motorized Shades
- Do not expose the motor or transmitter to moisture or extreme temperatures
- Do not allow children to play with this device
- Use or modification outside the scope of this instruction manual will void the warranty
- If cable or power connector is damaged, do not use
Important Information about your battery powered product:
Rechargeable batteries should be recycled, not disposed of with common
household trash. When/if you replace your shade, please recycle in accordance
with local environmental regulations. This also applies to the button type
battery in the remote control(s).
Statement Regarding FCC Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
CLEANING YOUR SHADES
Use a feather duster or vacuum using the soft brush attachment.
REPLACEMENT PARTS
In the event that replacement parts are ever needed, you may call:
1-800-264-1190 Please be sure to
provide the following information, if possible:
- The complete model or catalog number of your product
- A description of the product
- A description of the part needed
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>