ANIIOKI 1000W 48V Lithium Battery 1000w Inverter Power Supply User Manual

ANIIOKI 1000W 48V Lithium Battery 1000w Inverter Power Supply

Product Information

• Product Name
• Inverter Power Supply
• Manufacturer
• Aniioki
• Website
• www.aniioki.com

Specifications

• Input: Solar, Type-c1 QC3.0 5V/2.4A, Type-c2 USB, AC110V/60Hz
• Output: PD, QC3.0, USB 5V/2.4A, AC-OUTPUT
• Battery: 48V Lithium Battery 1000W

Product Usage Instructions

Charging

1. Connect the output plug of the Solar Panel (to be ordered and also can be used for 4 electronic devices separately) to the charging port.
2. The display screen will light up automatically during charging and the battery indicator will flicker to indicate that it is charging.

Discharging

1. Press and hold the POWER key for 3 seconds to turn on the device.
2. The display screen will show the battery level after startup.
3. The discharge time depends on the battery voltage (for reference only, the specific time depends on the actual usage).

AC Output

1. Press and hold the AC key for 3 seconds to activate the AC output.
2. The display screen will show the output voltage and frequency.
3. Connect the electric appliance to the AC output port (port &).

DC Output

1. Press and hold the DC key for 3 seconds to activate the DC output.
2. The display screen will show the DC output port and output 12V voltage.

PD and USB Output

1. Press and hold the USB key for 3 seconds to activate the PD and USB output.
2. The display screen will show USB QC3.0 TYPE C.
3. The port outputs PD, QC3.0, and USB 5V/2.4A.

Reading Light

1. Press and hold the LED-M key for 3 seconds to turn on the reading light.
2. The reading light will turn on at the first level of brightness.
3. Short-press the key again to increase the brightness level.
4. Short press the key again to further increase the brightness level.
5. Press and hold the key for 3 seconds to turn off the reading light.

Flashlight

1. Press and hold the key for 3 seconds to turn on the flashlight.
2. The flashlight will turn on at the first level of brightness.
3. Short-press the key again to increase the brightness level.
4. Short press the key again to further increase the brightness level.
5. Press and hold the key for 3 seconds to turn off the flashlight.

Display Screen Function Description

1. The charging and discharging time is indicated.
2. The AC inverter temperature is indicated. When the temperature exceeds 45 degrees, the fan will start to work and the indicator will light up.
3. When the DC discharge power exceeds 60W, the fan will start to work and the indicator will light up.

Precautions

• AC Malfunction Indication And Solution: Refer to the user manual for information on AC malfunction indication and troubleshooting.

Function Description

1. Insert the DC adapter cable into port 0 of the lithium battery, and connect the XT90 plug to the DC INPUT port (1) of the inverter.

2. Charging:

   • Connect the output plug of the Solar Panel (to be ordered separately) to the charging port I, the display screen will lights up automatically during charging and the battery indicator flickers, that indicate now is charging.

3. Discharge:

   • Press and hold the POWER key 2 for 3 seconds, the display screen will show the battery level after startup. The discharge time depends on the battery voltage ( for reference only, the specific time depends on the actual usage time).
   • Press and hold the POWER key 2 for 3 seconds to turn off the device. Other output functions can only be used when turned on the device.

4. DC Output:

   • Press and hold the DC key W for 3 seconds, after the display screen § shows “DC”, the DC output port D output 12V voltage.

5. PD and USB Output:

   • Press and hold the USB key for 3 seconds, after the display screen shows “USB QC3.0 TYEP. C”, the port outputs PD, QC3.0, USB 5V/2.4A.
     The 4 output ports support fast charging separately and also can be uesd for 4 electronic devices simultaneously.

6. AC Output:

   • Press and hold the AC key 9 for 3 seconds, the display screen (5 shows “AC”, 4 indicates the output voltage and frequency, the AC output port (port 8 & (0 ) outputs the voltage, now plug in the electric appliance and turn it on. AC port ×3 (port (8) & (2) are connected in parallel, and the total output power of the AC port ×3 (port 8 & (D ) cannot exceed 1000W.

7. The Flashlight (10) :

   • Press and hold the key 16 for 3 seconds, and the flashlight will turn on as the first level brightness; short press the key h again, the flashlight will turn to the second level brightness; short press the key 1 again, and the flashlight will enter to the SOS flashing mode.
   • The setting of the three modes cycle in sequence, press and hold the key 1 for 3 seconds to turn it off.

8. Reading Light W:

   • Press and hold the LED-M key 1 for 3 seconds, and the reading light will turn on as the first level brightness; short
   • Press the key (1 again, and the reading light will turn to the second level brightness; short press the key ( again, and the reading light will turn to the third-level brightness.
   • The setting of the three modes cycle in sequence, press and hold the key ( for 3 seconds to turn it off.

Display Screen Function Description

1. indicates the charging and discharging time;  indicates the AC inverter temperature when the temperature exceeds 45 degrees, fan 1 (2 starts to work, and the symbol (15) will light up.
2. When the DC discharge power exceeds 60W, the fan (1 (2 starts to work, and the symbol 15 will light up.
3. The estimation of charging and discharging time is calculated based on the default battery capacity of 30AH, and the battery % ratio is the battery voltage measure.

Precautions

1. Solar charging:
   • A. The device can match the foldable solar panel and the open single solar panel (the maximum power of the solar panel cannot exceed 300W, and the output voltage of the solar is 18V~36V).
   • When charging, the maximum voltage of the battery is 54.6V, to avoid the danger, please do not connect with the lithium battery with voltages other than 48V or any lead-acid battery.
   • B. The MTTP system tracks the maximum charging power automatically, please make sure the solar panel is placed in a sunny area (solar panels work best in direct sunlight).
2. Please check first when using, make sure the battery is firmly connected to this device, and then turn on the device.
3. After turning on the AC output, connect the device first, and then turn on/off the power switch of the device.
4. Keep in a dry place when using and storing, and avoid being exposed to rain and water.

AC Malfunction Indication And Solution

• Beep Sound: Twice – The lithium battery is under voltage, please stop using it and then charge the device.
• Beep Sound : Three times -The lithium battery is over-voltage, please stop using it and check if the battery matches.
• Beep Sound: Four times – The device temperature is too high, please stop using and then cool down before using.
• Beep Sound: Five times – Overload and short circuit, please replace the electric appliance and then start to use it.
• Beep Sound: Six times – Overload, please replace a low-power electric appliance and then start to use it.

Specifications:

1. DC Input: Only applicable to 13 series of 48V ternary lithium batteries, requiring a continuous discharge current of 30A (same as the inside BMS).
2. Solar Charging: 18-36V/ 5-8A (the maximum power of the solar panel cannot exceed 300W)
3. DC Output:
   • DC: 12V/8A x 2 (Plug #5.5 x 2.0mm)
   • Type-C1: PD100W
   • Type-C2: PD20W
   • USB 1: QC3.0 20W
   • USB 2: 5.0V 2.4A
4. AC Output: AC110V 60Hz (pure sine wave)
   • AC Output Power (AC x 3-port (8) & (20): 1000W (Max)
5. Flashlight: Two brightness levels + SOS flashing
6. Reading Light: Three brightness levels
7. Working Temperature: -10°C~ 40°C
8. Product Size: 274 x 270 × 170mm
9. Product Net Weight: 2.5KG

Contact Information:

• Website:www.anioki.com
• E-mail:sales@aniioki.com
• Phone: (909)296-9922
• www.anioki.com

Documents / Resources

| ANIIOKI 1000W 48V Lithium Battery 1000w Inverter Power Supply [pdf] User Manual
1000W 48V Lithium Battery 1000w Inverter Power Supply, 1000W, 48V Lithium Battery 1000w Inverter Power Supply, 1000w Inverter Power Supply, Inverter Power Supply, Power Supply
---|---
| Aniioki 1000W 48V Lithium Battery 1000W Inverter Power Supply [pdf] User Manual
1000W 48V Lithium Battery 1000W Inverter Power Supply, 1000W, 48V Lithium Battery 1000W Inverter Power Supply, 1000W Inverter Power Supply, Inverter Power Supply, Power Supply

References

• Aniioki Ebike: Best Online E-Bike Shop | High-quality and Affordable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>