enabling devices 7578 Cool Beats Penguin User Guide
- June 12, 2024
- enabling devices
Table of Contents
enabling devices 7578 Cool Beats Penguin User Guide
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
A new best friend!
Lights, sounds and songs play while Cool Beats Penguin’s head moves side to side. Just activate your capability switches to get the fun started. 85 songs, and phrases help introduce counting and colors. Size: 6″L x 5″W x 9″H. Requires 4 AA Batteries. Weight: 1½ lbs.
Operation :
1. Cool Beats Penguin requires 4 AA batteries. Use alkaline batteries only (e.g. Duracell or Energizer brand). Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly. Never mix old and new batteries together or different brands or types of batteries together.
2. The battery compartments are located under the toy’s feet. Carefully remove the screws from the covers using a Phillips head screwdriver, and lift the cover off. Observing proper (+) & (-) battery polarity, install 4 AA size batteries into the holders. Replace the covers and screws. Next set the ON/OFF/VOLUME switch to Low or High.
3. Cool Beats Penguin has two external switch input cord jacks so you can use your own capability switches if needed. To use an external switch, plug your switch into the desired jack on either side of Cool Beats Penguin. Make sure your switch is plugged in all the way. There should be no gaps. Activating your switch will replicate the corresponding built in button on the front of Cool Beats Penguin.
4. Just activate your capability switches or the two buttons on the front of Cool Beats Penguin to get the fun started. Lights, sounds and songs play while Cool Beats Penguin’s head moves from side to side. Songs and phrases help introduce counting and colors.
For more detailed information on all Cool Beats Penguin, features and functions please read the original manufactures user’s guide.
Troubleshooting :
Problem : Cool Beats Penguin does not work.
Action #1 : Rotate (spin) the batteries within the battery compartment to
ensure a good connection. Check that all batteries are installed properly.
Action #2 : Check all batteries for freshness, if weak or dead replace
with new batteries. Use an alkaline battery (E.G. Duracell or Energizer
brand).
Problem : Cool Beats Penguin does not work with a switch.
Action : Try a different switch with Cool Beats Penguin to rule out that
Cool Beats Penguin is the source of the problem.
Care of the Unit :
Cool Beats Penguin can be wiped clean with any mild household multi-purpose, non-abrasive cleaner and disinfectant. We recommend Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
Rev 4/8/2022
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>