velleman WSAK201 Panda Plant Guardian Instruction Manual
- June 12, 2024
- Velleman
Table of Contents
velleman WSAK201 Panda Plant Guardian
Product Information
This product is a PIC16F1503 microcontroller with various components and features. It includes a battery holder, LED indicator lights, and solder drop points for soldering connections. The product is available in different color variations, including brown, black, and orange.
Product Usage Instructions
- Ensure that you watch the notch on the product and align it correctly during installation.
- Mount the product on the front side of your desired surface or device.
- Connect the battery to the battery holder for the power supply.
- Observe the LED indicator lights for status and feedback.
- If required, solder connections using the solder drop points on the product.
- Refer to the center markings on the product for calibration or positioning.
- For further information or assistance, visit the website www.vellemanformakers.com/product/MK201 for a calibration video.
- Dispose of the product responsibly by contacting a specialized recycling company or following local waste disposal rules.
Please note that this product is compliant with environmental regulations in the European Union, and it should be disposed of properly to minimize harm to the environment.
OVERVIEW
- front side
- solder side
Resistor
- R1: 100: (brown, black, brown)
- R2, R3: 560: (green, blue, brown)
- R4, R5: 1: (brown, green, red)
- R6,R7: 1K8: (brown, gray, red)
- R8: 1: (brown, black, orange)
- R9: 100K: (brown, black, yellow)
Battery holder
solder drop
- E1, E2
Trimmer
- RV1, RV2: 100K
Diode
- D1: BAT85
IC socket
- IC1
LED
- LD1, LD2: RGB 5mm LED
IC
-
IC1: programmed chip for MK201 PIC16F1503
-
Watch the notch!
Thumb wheel
- RV1, RV2
Calibration
- Check out the calibration video on:
- www.vellemanformakers.com/product/MK201
TO ALL RESIDENTS OF THE EUROPEAN UNION
Important environmental information about this product This symbol on this unit or the package indicates that disposal of this unit after its lifecycle could harm the environment. Do not dispose of the unit as unsorted municipal waste; it should be disposed of by a specialized company for recycling. This unit should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If any doubt contact your local authorities about waste disposal rules.