AMETEK SX-1210i ASM Rack Mount Surge Eliminator and Power Conditioner User Manual

AMETEK SX-1210i ASM Rack Mount Surge Eliminator and Power Conditioner

Product Information

The product is a power protection system designed to ensure optimal equipment performance by safeguarding audio, video, and security rack mount equipment from damaging surges, spikes, and EMI/RFI noise. It combines surge elimination, EMI/RFI filtration, and advanced analytics to help businesses control the unstable nature of the power grid. The product is available in different configurations and models to cater to various power requirements.

Main Features

• Surge elimination at the rack level
• Comprehensive power protection and conditioning
• EMI/RFI filtration
• Impedance tolerant
• Remote turn-on capabilities (for specific models)
• Catastrophic over/under voltage shutdown (for specific models)
• Inrush current elimination (for specific models)

Product Models

Product Usage Instructions

To use the power protection system, follow these steps:

1. Select the appropriate product model based on your power requirements.
2. Ensure that the power protection system is properly grounded.
3. Connect the equipment that needs protection to the designated outputs of the power protection system.
4. Plug the power protection system into a suitable mains power outlet.
5. If applicable, use the remote turn-on capabilities to control the power supply to the connected equipment.
6. If applicable, utilize the sequencing feature to power up or down the electronic equipment in a specific order to avoid issues like pops, hissing sounds, and excessive inrush surge currents.
7. Monitor the performance of the connected equipment using the advanced analytics provided by the power protection system.

For further assistance or troubleshooting, refer to the user manual or contact our customer support.

Redefining Power Quality

TAKE CONTROL OF YOUR POWER
Every piece of equipment that you spec into a design or include in an installation says something about your company. The reliability of each one of those pieces and its ability to do its job adds to or detracts from your reputation.
Throughout its history, SurgeX has been a power quality innovator that provides a solid AC power foundation to ensure that electronic equipment is being supplied with clean electricity to perform properly with minimal service burden. Our patented Advanced Series Mode® technology eliminates surge energy up to 6,000V, without producing harmful side effects such as ground contamination or common mode disturbances and is unrivaled in the industry.
What’s in it for you? Simply, peace of mind. SurgeX combines true surge elimination, EMI/RFI filtration and unsurpassed analytical software to help businesses control the unstable nature of the power grid. When SurgeX products are part of your design, equipment error-codes, lockups, reboots, downtime and service calls are drastically reduced.
Protected by SurgeX means you never have to worry about whether your AV installation will fail or if the reputation of your business is at risk.

RACK MOUNT

Surge Elimination at the Rack Level
Comprehensive power protection and conditioning to ensure optimal equipment performance. Safeguards audio, video, and security rack mount equipment from damaging surges, spikes and EMI/RFI noise.

REMOTE TURN-ON CAPABILITIES

Surge Elimination with Remote Turn-On
These SurgeX products offer comprehensive power protection and conditioning to safeguard AV equipment from harmful electrical transients that can cause malfunction and downtime.
Via a pluggable terminal block, the RT series can be daisy chained with other RT units or with the SEQ series to expand turn ON/OFF operations. In addition, they can be integrated with other systems for off-site power control of electronic equipment.

SEQUENCERS

Keep Things in Order and Improve Performance
When electronic equipment must be powered up or down in order, rather than simultaneously, sequencing is needed. In AV systems, sequencing is often necessary for controlling power distribution to avoid pops and hissing sounds, along with excessive inrush surge currents that can trip circuits.

STANDALONE

Surge Elimination Outside of a Rack
The SurgeX Standalone lineup protects mission-critical equipment in environments outside of a rack. Their compact design
easily fits along, behind, or near equipment, takes up minimal space, and are perfect for AV, surveillance, and monitoring systems.

POWER MANAGEMENT

Take Control of the Power Environment
A complete power management solution that provides remote insight and control of the electrical power consumed by an underlying device. It enables the switching of devices in various power modes, each with different power usage characteristics related to device performance. It gives technicians the ability to easily manage their installs remotely and limit service calls.

Attack Power Anomalies
Designed to fulfill the unique needs of today’s small meeting/huddle space environments and digital signage/video applications, the SurgeX Squid packs an array of power quality tentacles in a compact design. It ushers in a new category for power quality that packs tremendous options in a compact design to offer a completely contained, boxed network control, AC/DC and USB protection in a single global application.

BATTERY BACKUP

UPS Standalone
Experience a Seamless Transition
SurgeX Standalone UPS solutions deliver clean continuous power, via online double conversion technology, to ensure the safe shutdown of equipment in the event of an outage. All incoming power is converted from AC to DC and then back to AC. If the main power is interrupted, the batteries are still holding up the incoming DC supply to the inverter, so the load continues to be supplied with absolutely no interruption whatsoever. The zero transfer time guarantees mission critical equipment remains up and running.

Features:

• Online double conversion technology
• True sinewave output
• Controllable receptacles
• Hot swappable battery
• Configurable as tower or 48.26cm rack
• Intuitive LCD screen
• Optional SNMP card to monitor and manage the UPS via the network

UPS Large Format

Clean, Continuous Power to Critical Loads
SurgeX Large Format uninterruptible power supplies guarantee a reliable, efficient and cost-effective solution for powering mission critical equipment. They regenerate AC power via true online
double-conversion technology coupled with an isolation transformer to entirely re-establish the neutral to ground bond. Unique to the industry, this combination eradicates harmonics and common mode noise to guarantee optimum performance and reliability. Offering a better experience for end users and less service calls for Integrator’s.

Features:

• Online double conversion technology
• Low-impedance isolation transformer
• Low Input TDH
• Static bypass switch
• Inrush load rating up to 300%
• Voltage conversion capability
• Generator compatibility
• Expandable battery packs
• Impressive 0.9 output power factor
• Multiple control options including SNMP
• Industry-leading -30%/+15% voltage range
• UL listed and CE marked

BRANCH CIRCUIT

Experience Circuit Level Power Protection
To offer a proper power foundation, surge protection and conditioning should be installed at the branch circuit level to guarantee full coverage and lessen the need for extra protection downstream.

DIAGNOSTICS

Instant Analysis and Resolution of Power Issues
The enVision power conditioning system’s analytical software monitors, identifies, analyzes, and offers solutions to resolve power issues that can cause equipment error-codes, malfunction and downtime.

REMOTE PORTAL
Gives service teams the ability to identify power problems remotely, includes browser-based application.

MULTI-STAGE TECHNOLOGY

DEFENDER SERIES
Comprehensive Protection for Everyday Applications
Designed specifically for everyday applications, the Defender Series provides cost-effective comprehensive power protection and conditioning to increase uptime and ensure equipment functions properly. Its three stages of protection ensure equipment is safeguarded from the harmful effects of surge energy, and its advanced filtering virtually eliminates normal and common mode electrical noise interference that can cause reboots and downtime.

TECHNOLOGY GUIDE

Advanced Series Mode®
Patented surge protection technology that eliminates surge energy and does not allow ground-wire contamination or common-mode disturbances.

Multi-Stage Surge Protection Technology
An advanced three-stage technology that ensures the highest level of protection against damaging surges, spikes, over/under voltage,
EMI/RFI noise, and wiring faults.

COUVS®
Catastrophic Over / Under Voltage Shutdown® will safely power down your system when the AC supply goes above or below a safe threshold. This patented technology protects power supplies from overheating due to under voltage or from direct damage due to over voltage supply. COUVS® is auto resetting and will resume AC supply once theline voltage returns to normal.

SurgeX ICE®
Inrush Current Elimination® counteracts the momentary inrush of current that electronic equipment creates during the turn-on period. This inrush of current is up to 5 times the normal operating current. Powerful electronic devices with large power requirements such as power amplifiers can often blow a circuit breaker or damage relay and switch contacts. SurgeX ICE® soft turn on clamps the initial inrush of current, eliminating the need to sequence amplifier turn- on, giving total protection to your system.

Impedance Tolerant®
Gives you a totally clean AC power supply. Impedance Tolerant® EMI/RFI filtering has been designed with real world impedances in mind,
unlike most other EMI/RFI filtering circuitry. Impedance Tolerant® EMI/RFI filtering does not create resonant peaks caused by input and
output mismatches. These resonant peaks can be counterproductive and increase the level of interference at certain frequencies.

All SurgeX International products are IEC 61643 certified, the globally accepted certification for a low voltage power supply system. All SurgeX International products are independently verified by an external test centre.

8001 Knightdale Blvd. | Suite 121 Knightdale, NC 27545
1-800-645-9721
surgex.com

Contact:
PureLink GmbH
Von-Liebig-Str. 10
48432 Rheine
Germany
phone +49 5971 800 299-0 Print +49 5971 800 299-99 ENVELOPE info@purelink.de

www.purelink.de

References

• SURGEX - The Best Surge Protectors, Power Conditioners and Power Management Systems for AV equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>