DECORQUIP Perfect Fit Pleated/Venetian Blind Instruction Manual
- June 12, 2024
- DECORQUIP
Table of Contents
Perfect Fit Pleated/Venetian Blind
Assembly & Fitting Instructions
Exploded Diagram
1 – Tensioned Pleated/Aluminium Venetian Blind
2 – Frame Section
3 – Extrusion Corner| 4 – Extrusion Corner Cover
5 – Fixing Bracket
6 – Assembled Perfect Fit Blind
---|---
Perfect Fit Frame Assembly Instructions
-
Carefully unwrap the blind parts and lay them out face down on a clean, even surface.
-
Guide the side frame components onto the exposed arms of bottom corner joints and follow the same procedure with the top frame compartment.
-
Secure the side frame components with supplied screws (1) and tighten attached middle corner joint screw (2). Repeat the process for each corner.
-
Turn assembled frame face up and clip supplied Extrusion Corner Covers onto each corner joint.
-
Your Perfect Fit blind is ready to be fitted.
Perfect Fit Blind Fitting Instructions
-
To ensure all brackets are in correct position for fitting, measure 85mm from top and bottom beading on both sides of the window frame.
-
Fit the bracket by pushing it between the glass and the rubber seal of the window. For ease insertion, use a lubricant in the form of washing up liquid on the base of each bracket. Repeat the process for each bracket.
-
Clean excess lubricant and clip your Perfect Fit blind onto the window frame.