SCHWAIGER CALED300 531 2in1 LED Camping Lamp User Manual
- June 12, 2024
- Schwaiger
Table of Contents
SCHWAIGER CALED300 531 2in1 LED Camping Lamp
Product Information
The CALED300 531 is a 2in1 LED camping light with a power bank function. It features an LED flashlight, three side LED spotlights, and a power bank that can charge compatible mobile devices. The product is designed for indoor and outdoor lighting purposes only and is not suitable for conventional household lighting. It is intended for private use and not suitable for commercial use.
The product comes with the following features:
- Taschenlampe (Flashlight)
- Seitenlicht (Side light)
- Halterungen (Mounts)
- Ein-/Ausschalter (On/Off switch)
- USB-Buchse (USB port)
- Micro USB-Buchse (Micro USB port)
General Safety and Warning Instructions
The product comes with the following safety and warning instructions:
- WARNUNG! (WARNING!)
- ACHTUNG! (CAUTION!)
- HINWEIS! (NOTE!)
Product Usage Instructions
- Take the product out of the packaging.
- For initial use, make sure the product is fully charged using a suitable USB cable with a maximum output voltage of 5V.
Modes & Functions
- Powerbank Function: The product can charge compatible mobile devices using its built-in power bank.
Technical Specifications
- Lichtstrom (Luminous Flux): 100 Lm (Taschenlampe), 200 Lm (Seitenlichter)
- Farbtemperatur (Color Temperature): 6,500 K
- Lebensdauer (Lifetime): Approximately 100,000 hours
- Leuchtdauer (Operating Time): Up to 2.5 hours (Taschenlampe), up to 2 hours (Seitenlichter)
- Ladedauer (Charging Time): Approximately 5 hours
- Produktmaterial (Product Material): ABS
- Abmessungen (B x H x T) (Dimensions): 75 x 150 x 75 mm
- Gewicht (Weight): 250 g
- Farbe (Color): Grau / Schwarz (Gray / Black)
Maintenance & Cleaning
- Before cleaning the product, ensure it is turned off and disconnect the USB cable.
- Clean the product using a soft, dry cloth.
Storage
Store the product in a safe place when not in use.
Disposal
Dispose of the product according to local regulations and guidelines.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages that are
sustained due to improper installation or mounting, improper use of the
product or non-compliance with the safety instructions.
Manufacturer‘s information
Dear Customer, please contact our Technical Support if you need technical
advice and your retailer is unable to help you.
Office Hours (Technical Support in German)
Monday to Friday: 8:00 a.m. – 5:00 p.m.
GENERAL
Read the user guide and keep it in a safe place.
Congratulations and thank you for purchasing this Schwaiger Product.
This user manual is an integral part of this product. It contains important
information on commissioning and handling.
This user manual is intended to assist you in using the product. Read through
the instructions for use carefully. Store this guide safely throughout the
product’s entire service life and pass it on to any subsequent users or
owners. Check that the supplied package is complete and ensure that none of
the parts are defective or damaged.
INTENDED USE
The product has an LED flashlight, three side LED spotlights and a power bank
function for charging compatible mobile devices. It is designed for indoor and
outdoor lighting only.
This product is not suitable for conventional household lighting. The product
is intended for private use only and is not suitable for commercial use.
Only use the product as described in this user manual. Any other use is
considered improper and may result in property damage.
Product details
1 | Flashlight |
---|---|
2 | Side light |
3 | Brackets |
4 | On/Off switch |
5 | USB socket |
6 | Micro USB socket |
General safety and warning instructions
WARNING!
Risk of electric shock!
Faulty electrical installation or excessive mains voltage can lead to electric
shock.
- If you use a USB charger, only connect it if the mains voltage of the socket matches the specification on the type plate.
- To charge the installed Li-ion battery, use only power supplies that comply with the SELV standard according to IEC 61558-2-6 or IEC 61347-2-13 or ES1 / IEC 62368-1 according to IEC 62368-3.
- Do not operate the product if it shows visible damage.
- Do not open the housing but entrust the repair to specialists. Contact a specialist workshop for this purpose. Liability and warranty claims are excluded in the event of repairs carried out independently, improper connection or incorrect operation.
- Never immerse the product in water.
- Keep the product away from open flames and hot surfaces.
- Never operate the product in wet areas or in the rain.
- Do not expose the product to rain or extreme weather conditions e.g., sub-zero temperatures, hail, extreme heat.
- Never place the product in such a way that it can fall into water.
- Charge the product indoors.
- Make sure that no liquid gets into the product and, if necessary, dry the product thoroughly before using it again.
- Ensure that children do not insert any objects into the product.
- The light source of this fixture is not replaceable; when the light source reaches its end of life, replace the entire fixture.
WARNING!
Hazards for children and persons with reduced physical, sensory or mental
abilities (for example, partially disabled persons, elderly persons with
reduced physical and mental abilities) or lack of experience and knowledge
(for example, older children).
-
This product can be used by children aged from eight years and above and persons with reduced physical, sensory, or mental capabilities or
lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children must not play with the product.
Cleaning and user maintenance must not be carried out by children without supervision. -
Keep children younger than eight years away from the product.
-
Do not leave the product unattended during operation.
-
Do not allow children to play with the packaging film. Children can get caught in it while playing and suffocate.
WARNING!
Fire hazard!
Improper handling of the product and battery may cause an explosion or fire.
- The battery is permanently installed in the case; it cannot be replaced.
- Keep the product away from water, other liquids, open flames, and hot surfaces.
- Do not cover the product with objects or clothing.
- Do not place open fire sources, such as lighted candles, on or near the product.
- Keep a distance of at least 5 cm from easily flammable materials.
- Charge the battery of the device regularly, even if you do not use it for a longer period of time (about every 3 months). Otherwise, the battery may become deeply discharged and permanently unusable.
- Due to the battery technology used, no previous discharge of the battery is necessary during the charging process, so it can be recharged regardless of the charge status.
- Place the product on a surface that is not sensitive to heat during the charging process. Slight heating during charging is normal.
- Leaking or damaged batteries can cause burns if they come into contact with the skin. Therefore, use suitable protective gloves in this case.
- Liquids leaking from batteries are chemically very aggressive. Objects or surfaces that come into contact with them can be severely damaged. RG 2
CAUTION!
Potentially dangerous optical radiation! Do not look into the lamp for a long
time during operation. May be harmful to the eyes!
- Never investigate an illuminated LED lamp from a short distance.
- Never view an illuminated LED lamp with a magnifying glass or other optical instruments.
NOTE!
Risk of damage!
Improper handling of the product may result in damage to the product.
- Do not drop the product or expose it to strong vibrations.
- Never place the product on or near hot surfaces (e.g., stove tops).
- Do not bring the product into contact with hot parts.
- All multimedia devices connected to the product must comply with the requirements of the Low Voltage Directive.
- Never expose the product to high temperature (heating, etc.) or weather (rain, etc.).
- Never pour liquid into the product.
- Never immerse the product in water for cleaning and do not use a steam cleaner for cleaning. The product may otherwise be damaged.
- Do not use the product if the plastic components of the product are cracked or deformed. Replace damaged components only with suitable original spare parts.
OPERATION IN DETAIL
Checking product and supplied package
Risk of damage!
If you open the packaging carelessly with a sharp knife or other pointed
objects, the product can be damaged quickly.
- Be very careful when opening it.
- Remove the product from the packaging.
- Check if the delivery is complete.
- Check whether the product or the individual parts show any damage.
If this is the case, do not use the product. Contact the hotline or e-mail address specified in this instruction manual.
First start-up
It is recommended to fully charge the built-in battery before using the
product for the first time.
NOTE!
Risk of damage!
Charging the product with an unsuitable USB charger may damage the product.
-
Only use USB chargers with max. 5 V output voltage for charging.
-
To charge the product, place it on a dry, horizontal surface that is not sensitive to heat.
-
Take a commercially available USB charging cable and insert the Micro USB plug into the Micro USB socket (6) of the product.
-
Insert the USB plug into a suitable USB charger or into an active USB socket (e.g., laptop, computer).
During the charging process, the indicator light of the Micro USB socket (6) flashes red. The charging time is approx. 5 hours. Modes & functions
The product has one flashlight (1) and 3 side lights (2), which can light up in a total of 8 different modes. To set these modes, press the on/off switch (4) in each case. This will switch through the modes as follows: -
1x press: Flashlight (1) lights up with full brightness
-
2x press: Flashlight (1) lights up with dimmed brightness
-
3x press: Flashlight (1) is blinking
-
4x press: Side lights (2) light up with full brightness
-
5x press: Side lights (2) light up with dimmed brightness
-
6x press: Flashlight (1) and side lights (2) light up
-
7x press: The product is switched off
-
-
Press and hold the on/off switch (4) for approx. 3 seconds to switch on the light on the inner side. Press a second time to dim the brightness.
Press a third time to switch the light off.
If you press the on/off switch (4) directly one after the other, you switch
through the different light modes. If, after setting a light mode, you keep
the product switched on in this mode for a while, press the on/off switch (4)
again to switch the product off. The three side lights (2) of the product can
each be folded out independently for individual illumination. In addition, the
flashlight (1) can be tilted 90° when the three side lights (2) are already
folded out.
In addition, the product has two movable brackets (3) from which it can be
hung on sufficiently stable objects or with which it can be set up for a
desired area illumination.
To do this, turn the brackets (3) downwards by 90° or 180° so that you can use
them as stands.
Please note that you should not tilt the flashlight (1) by a full 90° or fold
the side lights (2) out by the maximum 90° if you want to place the product on
the feet in order to achieve maximum stability. The balance of the product may
also vary depending on the surface selected.
Power bank function
The product‘s built-in battery can be used as a power bank to charge other
mobile devices, such as smartphones.
To do this, connect your device to be charged to the product via a USB
charging cable by inserting the USB plug into the USB socket (5).
The product does not have to be switched on for this.
Technical data
Item number | CALED300 531 |
---|---|
Power supply | 5 V DC, 1 A |
USB charging output | 5 V DC, 1 A |
Type of battery | Lithium-ion |
Battery capacity | 1,200 mAh |
Light source type | 3 W LED (flashlight) |
3 W COB LED (side lights)
Luminous flux| 100 Lm (flashlight) 200 Lm (side lights)
Colour temperature| 6.500 K
Lifetime| approx. 100,000 h
Lighting time| up to 2.5 h (flashlight) up to 2 h (side lights)
Charging time| approx. 5 h
Product material| ABS
Dimensions (W x H x D)| 75 x 150 x 75 mm
Weight| 250 g
Colour| grey / black
MAINTENANCE & CLEANING
Short circuit hazard!
Water or other liquids entering the housing can cause a short circuit.
- Never immerse the product in water or other liquids.
- Make sure that no water or other liquids get into the housing.
NOTE!
Risk of damage!
Improper handling of the product may result in damage to the product.
-
Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metallic cleaning objects such as knives, hard spatulas, and the like. These can damage the surfaces.
- Clean the product with a soft, dry cloth.
- If the product is stubbornly dirty, use a slightly damp cloth and a little mild detergent if necessary.
- Allow all parts to dry completely afterwards.
Storage
All parts must be completely dry before storing.
-
Always store the product in a dry place.
-
Store the product out of children’s reach in a securely locked place and at a storage temperature between 5 °C and 20 °C (room temperature).
Disposal
Do not dispose of batteries or electric and electronic devices in the normal
household waste. The consumer is legally obliged to return electrical and
electronic devices, and batteries that are at the end of their useful life to
the point of sale or public collection points that have been set up for this
purpose. Legislation in the country of use stipulate the specific requirements
regarding disposal. The symbol on the product, the user guide or the packaging
indicates this legal requirement.
Schwaiger GmbH | Würzburger Straße 17 | 90579 Langenzenn | Hotline: +49 (0)
9101 702-299 |
www.schwaiger.de
info@schwaiger.de
Geschäftszeiten: Montag bis Freitag: 08:00 – 17:00 Uhr | Office Hours: Monday
to Friday: 8:00 a.m. – 5:00 p.m.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>