OUTDOOR INDUSTRIES LED-SLSH-12 Mini LED Strip Light User Manual
- June 12, 2024
- OUTDOOR INDUSTRIES
Table of Contents
OUTDOOR INDUSTRIES LED-SLSH-12 Mini LED Strip Light
Product Information
The Gen Next Mini LED Strip Light is a versatile lighting product designed to be mounted to the underside of a horizontal surface, such as the bottom of a cabinet or shelf. It is important to follow the provided instructions and adhere to current electrical codes and the National Electric Code (NEC) to ensure safe installation and usage. The product comes with a polarized plug for added safety.
GEN NEXT: MINI LED STRIP LIGHT
MODEL NO.: LED-SLSH-12 / LED-SLSH-12-WW
LED-SLSH-16 / LED-SLSH-16-WW
CAUTION:
These products may represent a possible shock or fire hazard if improperly
installed or attached in any way. Products should be installed in accordance
with these instructions, current electrical codes and/or the current National
Electric Code (NEC).
MOUNTING
This product is designed to be mounted to the underside of a horizontal surface such as the bottom of a cabinet or shelf.
- Place the fixture in the desired location.
- Mark the position of the mounting holes according to the mounting hooks (A) or use the double-sided adhesive tape directly which is attached to the fixture. (B)
- Pre-drill holes at marked locations and attach mounting screws (included) to horizontal surface. (Figure 1) For mounting onto a surface other than wood, use suitable fasteners (not included).
- Fasten the screws in the mounting hooks, then install the fixture with the mounting hooks. (Figure 2 + Figure 3)
- Plug in the power cord connector. Then, plug in the Adaptor. (Figure 4)
- Max. Linking quantity for the adaptor, please make sure the total output wattage is equal or less than the 12V 1A adaptor can load (12W) or 12V 3A adaptor can load (36W).
IMPORTANT SAFETY INSTRUCTIONS: PLEASE SAVE!
This fixture has a polarized plug (one blade is wider than the other) as a
safety feature to the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use
with an extension cord unless the plug can be fully inserted. Do not alter the
plug.
ADDITIONAL SAFETY MEASURES
- Use only insulated staples or plastic ties to secure cords.
- Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
- Not intended for recessed installation in ceilings or soffits.
- Intended surface installation inside built-in furnishings such as kitchen cabinets, china cabinets or trophy cases.
- The National Electrical Code (NEC) does not permit cords to be concealed where damaged to insulation may go unnoticed. To prevent fire danger, do not run cord behind walls, ceiling, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically and immediately replaced when damaged is noted.
Product Usage Instructions
-
Choose the desired location for the fixture and place it there.
-
Mark the position of the mounting holes according to the mounting hooks (A) or use the double-sided adhesive tape attached to the fixture (B).
-
Pre-drill holes at the marked locations and attach the included mounting screws to the horizontal surface. (Figure 1)
-
If mounting onto a surface other than wood, use suitable fasteners (not included).
-
Fasten the screws in the mounting hooks, then install the fixture with the mounting hooks. (Figure 2 + Figure 3)
-
Plug in the power cord connector.
-
Plug in the Adaptor. (Figure 4)
-
Ensure that the total output wattage of the connected LED strip lights does not exceed the maximum load capacity of the adaptor.
The maximum quantity for each adaptor model is as follows:- LED-SLSH-TR-1A: Maximum quantity for Mini LED Strip Light – 5PCS
- LED-SLSH-TR-3A: Maximum quantity for Mini LED Strip Light – 4PCS
-
Ensure that the plug is inserted into a polarized outlet correctly. If it does not fit, reverse the plug. If it still does not fit, contact a qualified electrician.
-
Do not use an extension cord unless the plug can be fully inserted.
-
Avoid running the cord behind walls, ceiling, soffits, or cabinets where it may be inaccessible for examination.
-
Visually examine the cords periodically and immediately replace them if any damage is noted.
-
Outwater Industries, Inc. assumes no liability for improper installation.
Outwater Industries, Inc. assumes no liability for improper installation.