Halloween DZ16-050 Rocking Horse Instruction Manual
- June 12, 2024
- Halloween
Table of Contents
Halloween DZ16-050 Rocking Horse
Product Information
- Product Name: DZ16-050 Rocking horse
- Assembly Time: 10 minutes
- Recommended Age: 14 and up
- Power Adapter Specification: Input – 100-240V-50/60Hz, Output – 5.9V 2A
- Operation Settings: ON1, OFF/TRY ME, ON2
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
DZ16-050 Rocking horse This item, when assembled by the following instructions, should take 10 minutes to assemble.Please follow the step by step guide and enjoy your Rocking horse !
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors or in a sheltered outdoor area. We also recommend that you bring your item indoors during adverse weather (extreme cold, strong winds and/or rain). When not in use, store this product in it’s original packaging. Keep away from heat and moisture.
WARNING
This item is not a toy and should be used for decoration only. This item
contains small parts that can be a choking hazard. Keep all plastic and wire
parts away from children. This product is intended for people ages 14 and up.
Please read all instructions carefully before assembling. Save this
instruction sheet for future reference.
PARTS LIST
- Base
- Support poles x 3
- Torso frame
- Costume
- Right arm
- Left arm
- Head
- Horse head
Product Usage Instructions
- Setting up the Frame:
- Attach 3 Support Poles (B) to the Base (A) by aligning the quick-connected push button into the pre-drilled holes.
- Secure the Torso Frame (C) by aligning the quick-connected push button into the pre-drilled holes.
- Adding the Costume and Arms:
- Lower the Costume (D) over the Torso Frame.
- Insert the Right Arm (E) through the right sleeve and repeat for the Left Arm (F).
- Close and velcro the hands to the sleeves.
- Adding the Head and Horse Head:
- Set the Head (G) onto the Torso Frame into the hole.
- Repeat the same for the Horse Head (H).
- Close the velcro neck to the collar.
- Carefully connect the connector jack wired from the function box to the head.
- Connect the UL adapter and Try Me button at the function box and run down through the costume and out the back.
- Operation Instructions:
- The Rocking horse has 3 operation settings which can be controlled from the main function control box on the torso frame.
- ON1 Setting: Allows the item to be activated continuously.
- OFF/TRY ME Setting: Allows the item to be activated only when the try me button is pressed.
- ON2 Setting: Includes sound and light sensor activation. The item will operate for one audio cycle with sensor activation.
- The Function Control box also includes a Volume Control knob to adjust the volume level.
- Test the item before finalizing your display to set the volume to your liking.
FINISH
ENJOY YOUR Rocking horse !
The Function Control box also includes a Volume Control knob, which allows you
to adjust the volume to be as loud or as quiet as needed. Be sure to test the
item before finalizing your display so you can set the volume to your liking.
Note: This product is not a toy and should be used for decoration only. It contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children. For best performance, operate indoors or in a sheltered outdoor area. Store the product in its original packaging when not in use, and keep it away from heat and moisture.