hager XEVA220 WiFi Card for XEV1Kxxx Witty Charging Station Instruction Manual
- June 12, 2024
- hager
Table of Contents
hager XEVA220 WiFi Card for XEV1Kxxx Witty Charging Station
WHAT’S IN THE BOX
TOOLS
POWER
INSTALLATION
MOUNTING
SETTING
CONNECTING
RESET
Safety instructions
- Electrical devices must only be installed and assembled by a qualified electrician.
- The accident prevention recommendations applicable in the country must be followed.
- Failure to follow the installation instructions may result in damage to the device, fire or other dangers.
Wi-Fi card installation precautions
Electronic components such as the Wi-Fi card may be damaged by electrostatic discharges (ESD) when they are removed from their packaging.
- To ensure you correctly install your Wi-Fi card, we recommend:
- Holding the edges of the card only, to avoid touching the sensitive components.
- Wearing an antistatic bracelet when handling the card to prevent any damage. If you do not have an antistatic bracelet, touch a metal object connected to the earth before handling the card to remove any static electricity from your body. Regularly touch the metallic object when handling the card.
- Until the Wi-Fi card is installed, store it in its packaging to protect it from electrostatic discharges, or on an antistatic support.
Presentation
The primary function of the XEVA220 Wi-Fi card is to connect your station to your mobile phone. It allows you to monitor the dwelling and vehicle consumption based on rates through an application on your mobile phone. The use of this Wi-Fi card requires the addition, in the charging station, of a TIC Hager communication card referenced XEVA200 (Customer Tele-Information)
Technical features
Environmental conditions
- Operating temperature …………… -25 °C to +70 °C
- Storage temperature ………………. -25 °C to +70 °C
- Relative humidity ………………………….5 % to 95 %
- Maximum operating altitude …………………. 2000 m
Functional specifications
- Card power supply …………….. 12 V by the card controller B1280
- Radio frequency ………………………. 2.4 GHz as per IEEE 802.11 b/g/n
- Emission power ………………………………..<100 mW
If the radio emission power of the Wi-Fi card is insufficient (too many walls or tiles), add a Hager TKH181 Wi-Fi repeater to the installation.
Recommendations
Do not access or tamper with any internal sections of the device beyond those
mentioned in these instructions. Doing so will void the warranty and any other
assistance. Indeed, this kind of tampering may cause damage to electrical
components and/or parts. These products have been designed so that there is no
need to access these areas as part of set-up and maintenance.
Simplified EU Declaration of Conformity
Hereby, HagerEnergy GmbH declares that the radio equipment type XEVA220 is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following internet address:
hager.com.
This document is not contractually binding and is subject to change without
notice.
T +49 541 760268-0 F +49 541 760268-199 info@hager.com. hager.com. – 12.2022