ARIA Luxe No-See Receptacle Mount Installation Guide
- June 12, 2024
- Aria
Table of Contents
No-See Receptacle Mount
[Luxe]
Installation Guide
Materials Needed
- Pre-cut piece of surface material for Tray insert.
*Size will vary depending on model. - Bonding material (will vary depending on surface material)
- 4x self tapping screws
Disengage Body from Base by pushing firmly towards the hinged walls’ innermost
corner with the Door ajar.| Dry fit Base into wall.
Fasten Base to stud using provided pilot holes as necessary.
Apply silicone in Tray.
Set pre-cut Tray insert into place.
Allow time to cure.| Using the screws in the utility box, fasten the utility
box to the rear of Body component.
Re-engage Body by aligning latches and pushing firmly towards the inner corners
opposite of the hinged Door.| To hardwire electrical, have an electrician
repeat steps #1 & #5 to access utility box.
NOTE To easily open the Door, simply press the side that has hinges. The Door will pop open!
Additional Support support@ariavent.com /
www.ariavent.com
Patent Information
www.ariavent.com/pages/patents
Made in Canada
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>