EMERIL LAGASSE EM0042-0BL Retro Espresso Machine Owner’s Manual
- June 12, 2024
- Emeril Lagasse
Table of Contents
- EMERIL LAGASSE EM0042-0BL Retro Espresso Machine
- Product Information
- Safety Precautions
- Before You Begin
- IMPORTANT SAFEGUARDS
- Parts & Accessories
- Instructions for Use
- Care & Maintenance
- Troubleshooting
- Recycling
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EMERIL LAGASSE EM0042-0BL Retro Espresso Machine
Product Information
Retro Espresso Machine
The Emeril LagasseTM Retro Espresso Machine is a high-quality appliance designed to provide you with many years of reliable service. It is important to read the entire manual before using the machine to ensure proper operation and safety precautions.
Safety Precautions
When using the Retro Espresso Machine, it is essential to follow these basic safety precautions:
- Read all instructions before using the appliance.
- Never immerse the appliance or power cord in water or other liquids to avoid fire, electric shock, and injury.
- Avoid contact with moving parts.
- Do not use the appliance if it has a damaged cord or plug, is not working properly, or has been damaged or dropped. Contact an authorized service facility for examination, repair, or adjustment.
- Use only recommended attachments to prevent fire, injury, or electric shock.
- Do not use the machine outdoors.
- Avoid letting the power cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
- Clean the product and all accessories after each use.
- Do not immerse the appliance in any liquid.
- Do not place the coffee-maker in a cabinet during use.
- The surfaces of the appliance will get hot, and residual heat will keep them hot after use.
- The surface of the heating element is subject to residual heat after use.
- Use the appliance according to the instructions provided to avoid potential injury, electric shock, or other hazards.
- This appliance is not intended for use by children or people with reduced physical, sensory, or mental capabilities.
Safety Features
The Retro Espresso Machine is equipped with the following safety features:
- Polarized Plug (120V models only): The plug is designed to fit into a polarized outlet in only one way to reduce the risk of electric shock.
- Tamper-Resistant Screw: The machine has a tamper-resistant screw to prevent the removal of the outer cover. Repair should be done only by authorized service personnel.
SAVE THESE INSTRUCTIONS – FOR HOUSEHOLD USE ONLY
When using electrical appliances, basic safety precautions should always be
followed.
Do not use this appliance until you have read this manual thoroughly.
Before You Begin
The Emeril LagasseTM Retro Espresso Machine will provide you many years of reliable service. Before you begin, it’s very important that you read this entire manual, making certain that you are totally familiar with this appliance’s operation and precautions.
Unit Specifications
- Model Number: EM0042-0BL
- Power Supply: 120V~ 60Hz
- Rated Power: 1350 Watts
IMPORTANT SAFEGUARDS
- Read all instructions before using.
- To protect yourself from fire, electric shock, and injury to persons, never immerse the appliance or the power cord in water or other liquids.
- Avoid contact with moving parts.
- Do not operate any appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. Return the appliance to an authorized service facility for examination, repair, or adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, injury, or electric shock.
- Do not use outdoors.
- Do not let the power cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
- Clean the product and all other accessories after each use.
- Do not immerse in any liquid.
- The coffee-maker shall not be placed in a cabinet during use.
- The surfaces of the appliance will get hot. Residual heat will keep the surfaces hot after use.
- The surface of the heating element is subject to residual heat after use.
- Use the appliance according to these instructions. Any misuse may cause potential injury, electric shock or other hazards.
- This appliance is not intended for use by children or by people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- To disconnect, turn any control to “OFF”, then remove plug from wall outlet.
SAVE THESE INSTRUCTIONS
Safety Features
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
- A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
- Extension cords may be used if care is exercised in their use.
- If a long detachable extension cord is used:
- The marked electrical rating of the power cord or extension cord should be at least as great as the electrical rating of the appliance.
- If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
- The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
Note: This appliance has important markings on the plug blade. The attachment plug or entire cord set (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
SAVE THIS INSTRUCTION MANUAL.
FOR HOUSEHOLD USE ONLY.
Parts & Accessories
- Cup warming plate
- Status gauge:
- ( ) – Off
- ( ) – Preheat
- ( ) – Ready
- ( ) – Brew
- ( ) – Steam
- Indicator light
- Control lever:
- ( ) – Off
- ( ) – On
- ( ) – Brew
- ( ) – Steam
- Drip tray cover
- Removable drip tray
- Drip tray full indicator
- Steam/hot water control knob
- Steam wand
- Removable panarello (steam nozzle)
- Portafilter
- 2 shot sieve
- 1 shot sieve
- Measuring spoon/Tamper
- Cleaning tool
- Water tank lid
- Removable water tank
- Cord storage
Instructions for Use
Before First Use
- Please register your warranty at www.prodprotect.com/emeril.
- Unpack all listed contents from the packaging.
- Read all material, warning stickers, and labels.
- Remove all packing materials, stickers, and labels from the appliance, and remove the plastic band around the power plug. Remove any clear or blue protective film on the components before use.
- Wash the portafilter, sieves and the measure/tamper in warm soapy water. Rinse and dry.
- Before using for the first time, or if the appliance has not been used for a long time, clean it by filling and running the appliance without coffee. Follow the instructions under FILLING and MAKING ESPRESSO but without adding any coffee.
- Clean the steam system by following the instructions under CARE AND MAINTENANCE.
Auto Shutoff
After 25 minutes of inactivity, your espresso maker will shut off. The heater will shut off and the light will go out. To turn it back on:
- Move the control lever to the off position ( ) and then back to the on ( ) position.
Filling
- Remove the water tank by lifting it upwards (Fig. A).
- Fill the water tank with cold, fresh water to the max marking (Fig. B).
- Refit the water tank (Fig. C). Ensure it is correctly fitted and fully seated.
Making Espresso
Espresso can be enjoyed on it’s own or used for many popular espresso based variations such as Latte, Cappuccino, Americano, etc. Your espresso maker can make a single shot (approx. 30ml), or a double shot (60ml) of espresso.
Filling the portafilter
- Decide whether you are making a single shot or double shot.
- For a single shot fit the 1 shot (smaller) sieve into the portafilter; for a double fit the 2 shot (larger) sieve (Fig. D). For ESE (easy serving espresso) pods use the 1 shot sieve.
- Use the measure to fill the sieve (Fig. E). For a single shot use 1 measure and for a double use 2 measures (Fig. F). The coffee in the measure should be level and not heaped (Fig. G).
- Lightly tamp (compress) the coffee into the portafilter using the flat end of the measure (Fig. H) until it is level. You need to compact the coffee just enough to create resistance to the water as it passes through the coffee. If the coffee is too loose, the water will pass easily through it and the full flavor won’t be extracted. If the coffee is too tight, it will be difficult for the water to pass through the coffee and the flavour will be harsh and bitter.
Fitting the portafilter
- Make sure the rim of the portafilter is free from any coffee debris. Fit it into the machine with the handle facing out to the left so that is aligned with the mark (Fig. J).
- Push the portafilter upwards then turn it to the right until it stops (Fig. K). To remove the portafilter, turn it to the left until the handle lines up with the mark.
Brewing
- Place a cup/cups on the drip tray under the outlet of the portafilter. You can make a single shot into one cup, a double shot into one cup or a double shot shared between two cups by placing two cups side by side under the outlet and preparing the portafilter with the 2 shot sieve.
- Make sure that the steam control knob is set to the off ( ) position.
- Switch the unit on by moving the control lever to the on ( ) position.
- The unit will start to heat up. The status gauge pointer will move to the preheat ( ) position and the light will slowly pulse on and off.
- Once the unit has heated up the pointer will move to the ready ( ) position and the light will remain on.
- Move the control lever to the brew ( ) position. Your coffee maker will pump a small amount of water into the filter before pausing for a few seconds. This pre-infusion step ensures that the maximum flavour is extracted from the coffee.
- After pre-infusion (approx. 5 seconds), coffee will start to come out of the portafilter.
- IMPORTANT: Do not leave the machine unattended while brewing. The machine will continue to dispense coffee for up to 60 seconds. It is up to you to manually stop the machine once sufficent coffee has been made (typically, this is 30 ml for a single shot, 60 ml for a double). To stop brewing, move the control lever from the brewing ( ) position to the on ( ) or off ( ) position.
- Note: If you are going to brew again remember that the portafilter and its contents will be hot! Handle with care when removing and replacing it, or allow it to cool to a safe handling temperature.
- When you have finished, move the control lever to the off ( ) position.
Steam/Hot Water Functions
The steam/hot water functions can be used to heat milk, froth milk and heat drinks that have cooled.
IMPORTANT: The appliance requires a short cooling period after the steaming or frothing function is completed and will not be able to brew immediately. The light will flash to indicate this. You can speed up cooling by dispensing hot water for approximately 10 seconds after steaming.
Steaming milk
- Move the control lever to the steam position ( ). The gauge will move to the preheat ( ) position as the unit heats up. Once the temperature is correct, the gauge will move to the ( ) position.
- Fill a small jug with milk.
- Hold the jug under the steam nozzle with the nozzle beneath the surface of the milk.
- Turn the steam/hot water control knob counterclockwise. The further counterclockwise you turn the control knob, the more steam is produced.
- When the milk is heated to your satisfaction, turn the steam/hot water control knob clockwise to the off ( ) position.
- Immediately clean the steam nozzle. Refer to the Care and Maintenance section for cleaning instructions.
Frothing milk
- Follow steps 1 and 2 under ‘Steaming milk’. Use cold milk from the refrigerator for best results.
- Hold the jug under the nozzle as above and open the steam/hot water control knob as desired.
- To make frothy milk with large bubbles, hold the nozzle just under the surface of the milk and make circular motions with the jug as steam is released (Fig. L).
- To make frothy milk with small bubbles (micro foam), hold the nozzle fully under the surface of the milk and make circular motions with the jug as steam is released (Fig. M).
- Turn the steam/hot water control clockwise to the off ( ) position when you are finished.
- Immediately clean the steam nozzle. Refer to the Care and Maintenance section for cleaning instructions.
Hot water
- Move the control lever to the on position ( ). The gauge will move to the preheat ( ) position as the unit heats up. Once the temperature is correct, the gauge will move to the ( ) position.
- Hold a suitable container under the steam nozzle.
- Turn the steam/hot water control knob fully counterclockwise to the position.
- Hot water will come out of the steam nozzle for up to 90 seconds.
- Turn the steam/hot water control knob clockwise to the off ( ) position when you are finished.
Heating drinks
- Follow the directions under ‘Steaming milk’ but holding the cooled drink under the steam nozzle instead of the milk.
Cleaning the steam nozzle after each use
- Clean the steam nozzle and the swivel arm immediately after every use.
- Immerse the steam nozzle in a cup of clean water.
- Turn the steam/hot water control knob counterclockwise. Let steam escape into the clear water for several seconds.
- Repeat the process several times if necessary.
- Finally, carefully remove the steam nozzle and wipe it and the swivel arm with a clean damp cloth before replacing it.
Tips
- Place your espresso cups on top of the unit where they will be gently warmed.
- To get a hotter espresso, warm the portafilter before use. Fit the sieve into the portafilter, fit the portafilter and run the brewing process for 5-10 seconds to heat the filter up. Then, remove the portafilter and use it as normal to make espresso. Be aware when handling the portafilter and sieve that they will be hot after doing this.
- After several uses of the steam function, the temperature of the unit can become high and this will prevent further brewing until the machine has cooled a little. You can use the hot water function to cool the machine more quickly. The machine will release steam at first; when water begins to dispense, the unit will be cooled to brewing temperature again.
Care & Maintenance
Cleaning
- Unplug the appliance and let it completely cool down.
- Clean the exterior surfaces and the steam nozzle with a slightly damp cloth and then dry them thoroughly. Make sure that no water enters the product interior (for example, through the control lever opening). The steam nozzle tip can be removed by pulling it downwards and it can then be washed separately.
- Remove the portafilter and sieve and empty out the coffee grounds. Wash under running water and dry thoroughly.
- Wipe the area on the machine where the portafilter fits.
- Empty the drip tray when you have finished using the machine, or when the drip tray full indicator pops up.
- Use the cleaning tool to unblock the openings in the portafilter.
- The steam nozzle, sieves, drip tray and drip tray cover can be cleaned in a dishwasher.
Descaling
After approximately 500 cycles, the light will show red indicating that the unit should be descaled. This is a warning and will not affect coffee making but the light will remain red until it is reset after descaling the appliance.
Over time, calcium deposits or “scale” may build up in your brewer. Scale is non-toxic, but if left unattended, can hinder brewer performance and cause premature failure. Regularly descaling your machine helps to maintain beverage quality, as well as the lifespan of the heating element, and other internal parts that come in contact with water throughout the brew process. A full cleaning with vinegar is recommended once a month. More frequent cleanings may be required in areas with higher water hardness. If using a proprietary descaling product, follow the manufacturer’s instructions.
- Pour fresh water and the specified amount of decalcifier into the water tank. Use a 50/50 mix when using a vinegar solution.
- Repeatedly start the brewing process and also use the ‘hot water’ process to clean the steam nozzle and internal components.
- Do this until the water tank is empty. If necessary, repeat this process.
- After descaling, rinse the product several times by brewing water with no coffee to remove any decalcifier residue.
- To reset the light, turn the unit on ( ) then rotate the steam/hot water control knob conterclockwise and back to the off ( ) position twice within 5 seconds while the unit is preheating.
Troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
No espresso is made. | Water tank empty. | Fill the water tank. |
Portafilter or sieve is blocked. | Remove and clean. | |
Machine needs descaling. | Descale the machine. | |
Grind is too fine or coarse. | Grind the coffee to the correct consistency. | |
Too much tamping pressure was used. | Empty sieve and re-add coffee using less |
tamping pressure.
Espresso leaks from around the portafilter.| The portafilter is not fitted
correctly.| Remove and refit the portafilter. Make sure it is turned fully to
the right until it won’t turn any further.
Portafilter can’t be fitted.| Too much coffee in the sieve.| Use the supplied
measure/ tamper as directed.
Debris around the portafilter fitting.| Clean the area where the portafilter
fits.
Coffee tastes weak.| Not enough coffee in the sieve.| Use the supplied
measure/ tamper as directed.
Grind is too fine or coarse.| Grind the coffee to the correct consistency.
Coffee too loose in sieve.| Tamp the coffee down with more pressure.
Light slowly pulsing on and off.| This is normal and occurs when the machine
in heating up.
Light flashing rapidly.| Steam /hot water control knob in the open position.|
Turn the steam /hot water control knob to the closed ( ) position.
The control lever has been in the brewing position ( ) for longer than 60
seconds.| Reduce the brewing time.
You have been trying to create steam for longer that 180 seconds.| Reduce the
steaming time.
You have been trying to make hot water for longer that 90 seconds.| Reduce the
hot water running time.
Attempting to brew before the machine has reached operating temperature.|
Allow the machine to heat up (gauge shows ).
Attempting to steam before the machine has reached operating temperature.|
Allow the machine to heat up (gauge shows D).
Recycling
To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.
LIMITED WARRANTY
TWO-YEAR LIMITED WARRANTY
(Applies only in the United States and Canada)
For service, repair or any questions regarding your appliance, call the appropriate 800 number listed within this section. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.
What does it cover?
- Any defect in material or workmanship provided; however, Empower Brands, LLC’s liability will not exceed the purchase price of product.
For how long?
- Two years from the date of original purchase with proof of purchase.
What will we do to help you?
- Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
- Save your receipt as proof of date of sale.
- Visit the online service website at www.prodprotect.com/emeril, or call toll-free 1-800-768-7806, for general warranty service.
- If you need parts or accessories, please call 1-800-738-0245.
How does state law relate to this warranty?
- This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
What does your warranty not cover?
Damage from commercial use Damage from misuse, abuse or neglect Products that have been modified in any way Products used or serviced outside the country of purchase Glass parts and other accessory items that are packed with the unit Shipping and handling costs associated with the replacement of the unit Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
Are there additional warranty exclusions?
This warranty shall not be valid where it is contrary to U.S. and other applicable laws, or where the warranty would be prohibited under any economic sanctions, export control laws, embargos, or other restrictive trade measures enforced by the United States or other applicable jurisdictions. This includes, without limitation, any warranty claims implicating parties from, or otherwise located in, Cuba, Iran, North Korea, Syria and the disputed Crimea region.
We are very proud of the design and quality of our Emeril LagasseTM Retro Espresso Machine.
This product has been manufactured to the highest standards. Should you have
any questions, our friendly customer service staff is here to help you.
To contact us, call us at
1-800-768-7806.
The Emeril Lagasse trademarks are owned by Martha Stewart Living Omnimedia, Inc., used under license.
© 2023 Martha Stewart Living Omnimedia, Inc., used under license.
All other marks are trademarks of Empower Brands, LLC.
Dist. by: Empower Brands, LLC, Middleton, WI 53562
® Registered Trademark and TM Trademark of Empower Brands, LLC.
© 2023 Empower Brands, LLC. All rights reserved. 1/23
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>