Inxni Z3PRO Ultra Multifunctional High Speed Self Cleaning Floor Cleaner Instruction Manual

Inxni Z3PRO Ultra Multifunctional High Speed Self Cleaning Floor Cleaner

Product Information

This product is a floor scrubber designed for use on hard floors in indoor environments. It is suitable for cleaning various types of hard floors, including waxed floors, stone floors, rubber floors, marble floors, granite floors, terrazzo floors, solid wood floors, composite floors, bamboo floors, various mirror tiles, and porcelain tiles.

The product is not applicable to people with serious physical, sensory or intellectual defects or people lacking experience and common sense, unless it is supervised or directed by others to ensure its safe use. It is not suitable for industrial or outdoor use.

It is important to read the instruction manual carefully before using the product and follow the steps for installation. Failure to do so may result in product damage or serious personal injury.

Product Usage Instructions

1. Ensure that you have read and understood the instruction manual before using the product.
2. Keep the manual properly and attach it to the machine if you transfer it to a third party.
3. Avoid touching the plug or any live part of the product with wet hands to prevent electric shock hazards.
4. If the charger or plug is damaged, stop using it and contact professional maintenance personnel for replacement.
5. Avoid contact between the air passage, moving parts, and long hair, loose clothes, fingers, or other body parts.
6. Do not point the vacuum tube, accessory suction head, or tools at your eyes or ears, or put them into your mouth.
7. If electric leakage, overheating, abnormal motor temperature, or abnormal noise is detected during use, stop using the product and address the issue promptly.
8. Regularly check for blockages that may reduce suction and affect the machine’s performance.
9. Switch off the roller brush before replacing it.
10. In case of machine breakdown, do not attempt to repair it yourself. Contact the after-sales department for assistance.
11. Ensure that the product is used only on hard floors in indoor environments as specified in the manual. Using it on uneven surfaces may not yield optimal results.
12. Avoid using the product near or on the surface of flammable and explosive objects to prevent fire and explosion risks.
13. Avoid using the product near working fireplaces and heaters to prevent deformation of the machine shell.
14. Do not use the product to absorb high-temperature substances, superfine substances, dangerous substances, chemical substances, or other substances with uncertain physical properties.
15. Do not use the floor scrubber to absorb detergent, kerosene, gasoline, alcohol, oil paint, perfume, or similar substances.

Important Safety Instructions

Warning
Before using this product, please read all contents of this manual carefully and install the machine according to the steps of this manual. Keep this manual properly. If you transfer the product to a third party, please attach this manual together with the machine. Any operation inconsistent with the instructions in the manual may lead to product damage or serious personal injury. This product is only suitable for use in regular family environment, not suitable for industrial or outdoor use.

1. The product is not applicable to people with serious physical, sensory or intellectual defects or people lacking experience and common sense (including children), unless it is supervised or directed by others to ensure its safe use.
2. Do not touch the plug or any live part of the product with wet hands to avoid electric shock hazard.
3. If the charger or plug is damaged, please stop using it. Please call our professional maintenance personnel for replacement to avoid hazards.
4. Please keep the air passage and moving part of this product away from long hair,loose clothes, fingers and other parts of the body. Do not point the vacuum tube,accessory suction head or tools at your eyes or ears, or put them into your mouth.
5. When using, if electric leakage or motor temperature is too high and abnormal noise is found, such as overheating, abnormal noise, odor, weak suction, etc. of the machine body, please stop using immediately and call our professional maintenance personnel.
6. Please use the special charger provided by our company for charging; Other types of chargers may cause battery failure or extreme thermal effects.
7. If the product is not used for a long time,please turn off the power and unplug the charging socket.
8. After using the machine, please clean the dirt water tank in time to keep the ventilation path unblocked, so as to avoid blocking and causing suction drop and motor heating, which will affect the service life of the floor scrubber.
9. The body and mop of the floor scrubber contain electrical components, which cannot be soaked in water or washed.
10. Please check the smoothness of the suction nozzle regularly. If there is any blockage,please remove it in time to prevent the blockage from reducing the suction and affecting the performance of the machine.
11. Please make sure to switch off the roller brush before replacing it.
12. When the machine breaks down, do not repair it by yourself. Please call our after-sales department for help.
13. All the technical and other data reflected in this product manual are obtained by our company or the designated third-par-ty testing company, and our company reserves the right of final interpretation.

About the scope of use of the product

1. This product is applicable to hard floors in indoor environment, including waxed floors, stone floors, rubber floors, marble floors, granite floors, terrazzo floors, solid wood floors, composite floors, bamboo floors, various mirror tiles, porcelain tiles and other flat ground surfaces. If this product is used on uneven ground surface, the best use effect may not be achieved.
2. Do not use this product near or on the surface of flammable and explosive objects,there is a risk of fire and explosion.
3. Do not use this product near the working fireplace and heater to prevent the machine shell from deformation.
4. Do not pump high-temperature substances (cigarette butts, matches or hot ashes that are not extinguished), superfine substances (such as lime, cement, wood chips,gypsum powder, ashes, carbon powder, etc.), dangerous substances (such as solvents, scale removers, etc.), chemical substances (such as acidic substances,cleaning agents, etc.) and other substances with uncertain physical properties.
5. Do not use this floor scrubber to absorb detergent, kerosene, gasoline, alcohol, oil paint, perfume, etc.
6. Do not use this floor scrubber to absorb toner used inside the laser printer and copier. These objects may cause fire or explosion.
7. Do not use this floor scrubber to absorb sharp objects, such as glass fragments,small toys, pins, paper clips, stones,plaster, large pieces of paper, etc. These objects may cause blockage and damage the machine.
8. Please do not use this floor scrubber to suck up any burning or smoking objects,such as the soot with the heat source not extinguished, burning cigarette butts or matches.
9. Stains like shoe polish, oil paint, pigment and other stains with strong grease,viscosity or dyeing are not within the scope of use of this product.

About cleaning solution

1. lf a large amount of cleaning solution is added, more foam will be produced during use, which may penetrate into themotor and cause danger.
2. Clean according to the proportion of instructions. lt is recommended to use the detergents produced by our company andthe manufacturers approved by our company, which shall not contain acid, aqueous alkali or substances harmful to theenvironment.
3. Keep the detergent out of the reach of children. lf the cleaning solution accidentally gets into the eyes, wash it thoroughlywith clean water; ln case of accidental ingestion, seek medical advice immediately.
4. When disposing dirt water and cleaning solution, ocal environmental protection regulations shall be followed.

About the Machine

1. Do not disassemble or assemble the closed machine by yourself. There are no parts in the machine that can be repaired by customers, and do not try to change the performance of the machine, otherwise it will lead to danger.
2. Using a voltage that does not correspond to the specification of this product will damage the motor and more likely cause harm to users.
3. The correct rated voltage is marked on the nameplate.
4. When cleaning stairs, extra caution should be taken to prevent falling.
5. Do not shake the machine up and down or collide violently to prevent dirt water from flowing into the motor.
6. When the motor is working, please do not lift or carry the machine up and down, and do not tilt the machine to one side or lay it flat to prevent dirt water from entering the motor. To prevent tripping, the machine should be placed against the wall after use.
7. If the clean water tank and dirt water tank are not installed correctly, please do not use them.
8. Do not place any small objects at the air outlet, and do not block the air outlet. Remove all small objects that may hinder the smooth airflow at the air outlet to prevent the machine from overheating.
9. Do not get the machine body wet, or fire and electric shock may occur due to short circuit of the machine.
10. The water tank contains water stain, which is the product test residue before leaving the factory. It is a normal phenomenon. Please be assured to use it.
11. When the temperature of the battery pack rises, the built-in battery pack cooling system will automatically start to work, which is a normal phenomenon. Please be assured to use it.

Product Overview

Product introduction

Interface Instructions

Cleaning mode

Energy Saving Mode: Low suction and low water flow
MAX Mode: High suction and high water flow
Sterilization Mode: The cleaner will generate electrolytic water in the clean water tank to be used for cleaning.
Suction-Only Mode: The cleaner will only provide suction power and not disperse water.

Product disassembly & assembly

Handle installation instructions
click, ensure that the handle is tight and not loose, then the installation is in place successfully.

To disassemble, use a hard object to stretch into the hole on the back of the mian machine and press the shrapnel, while holding the handle and pulling it up.

Instructions for disassembly & assembly of clean water tank

1. To remove the clean water tank, hold the machine body with one hand and push the release button of the clean water tank with the other hand, then pull it outward, then the clean water tank can be taken out.
2. To install the clean water tank, first put the bottom of the clean water tank into the opening support position of the machine body, and then gently push the clean water tank, when you hear the click, the installation is in place successfully.

Instructions for disassembly & assembly of dirt water tank

1. To remove the dirt water tank, hold the machine body with one hand and push the release button of the dirt water tank with the other hand, then pull it outward, then the dirt water tank can be taken out.
2. To install the dirt water tank, first put the bottom of the dirt water tank into the opening support position of the machine body, and then gently push the dirty water tank, when you hear the click, the installation is in place successfully

Disassembly & assembly instructions for brush roller transparent window

1. To remove the brush roller transparent window, first apply your fingersto the position as shown in the figure and press the release buttons at both ends of your thumb and index finger to lift up, then take out the brush roller transparent window.
2. During installation, first apply your fingers to the position as shown in the figure, and press the release buttons at both ends of your thumb and index finger down at the same time. When you hear a click, the installation is successful.

Disassembly & assembly instructions for brush roller

1. Rotate the brush roller release button 90 degrees anticlockwise, and then pull it outward as a whole to take out the brush roller component.
2. During installation, first align the right side of the brush roller with the driving head, then align the left side of the brush roller in place, and then rotate the brush roller release button 90 degrees clockwise. The installation is successful when a click is heard.

Technical parameters

Main machine

Product model

| ****

INZ003

| ****

Clean water tank capacity

| ****

0.75L

Working voltage

| ****

DC 21.6V

| ****

Charging time

| ****

4~5h

Rated power

| ****

200W

| ****

Endurance(MAX)

| ****

40mins

|

4000mAh

| ****

Overall dimensions

| ****

2702651150 mm

Charger model

| ****

EBS024F -2601000BB

| ****

Net weight

| ****

4.0 KG

Attention

1. The above data are from the laboratory of our company, and the actual use varies according to the change of the use environment.
2. Due to the need for continuous improvement of the product, the product is subject to the real object, and our company reserves the right to update the product.
3. The rated power is 200W.

Instructions

Prepare/start to work

1. Before use, please check whether your Cleaner is powered. If not, please charge it in time (refer to “Product Charging” for details) and use it after fully charging.
2. The default power-on mode is energy saving. You can select the mode based on actual use requirements

The default power-on mode is energy saving. Press the mode button to switch between ECO mode, Max mode, Dry Mode, Sterilization Mode.

The machine is equipped with a vertical switch. Please tilt the machine after starting. Do not tilt the machine more than 145 degrees to avoid water leakage. After using the machine, it is recommended to put it back on the charging base vertically.

Warning Do not inhale foam liquid.

Attention

1. For the sterilization mode, cleaning solution cannot be added.
2. For the sterilization mode, only use the it after 30 seconds of water electrolysis.

Water injection in clean water tank

1. Press the release button of the clear water tank gently to remove the tank (Figure. 1)
2. Open the upper cover of the clean water tank and inject clean water (below 50 ° C) to the water level. If deep cleaning is required, pour another bottle of floor cleaning liquid of this brand (figure 2)
3. Close the upper cover of the clean water tank to ensure it is tight without looseness (Figure. 3)
4. Install the clean water tank back to the machine body, and the installation is successful when the click is heard (Figure 4).

Dirt water tank cleaning

1. Gently press the dirt water tank release button to remove the dirt water tank (Figure. 5).
2. Hold the box with one hand and pull out the cover of the dirt water tank with another hand (Figure. 6).
3. After the dirt water is poured out, install the dirt water tank back to the machine body, and the installation is successful when the click is heard (Figure 7).

TIPS : The water tank contains water stains, which is the product test residue before leaving the factory. It is a normal phenomenon, so please be assured to use it.

Product charging
First put the machine on the charging base, connect one end of the charger to the charging base, and connect the other end to the home socket; The power cord can be retracted when it is not needed. When charging, please keep the machine upright and close to the corner of the wall to avoid tripping and other injuries.

Warning
If the product is not used for a long time after purchase, please use the special charging base provided by our company to charge the battery for 3 hours every 3 months (no need for full charge).

Safe disposal method of used battery

1. Before discarding the appliance, the battery must be taken out of the appliance.
2. When taking out the battery, the appliance must be powered off.
3. The battery shall be disposed of safely.
4. Please send the removed battery to the designated professional and qualified battery recycling agency.

Battery removal procedure

1. Rotate the parts of display screen counterclockwise by 25° and remove the display screen.
2. Use a cross screwdriver to remove the four screws of the battery box cover and then remove it.
3. Pull out all plugs on the main control panel, use a cross screwdriver to remove two screws on the main control panel, and then remove it.
4. Remove the two screws of the parts of battery pack with a cross screwdriver to take out the battery.

Function introduction

• ECO mode: Low suction, low flow, light pollution & light washing
• Max mode: High suction, high flow, heavy pollution & heavy washing
• Dry mode: High suction, no flow, collect water
• Sterilization mode: High suction, high flow, sterilization
• Self-cleaning mode: Self-cleaning mode can be started after the machine is put into the charging base
• Silent mode: One touch to switch on and off machine’s voice
• Clean water tank status: The state of clean water tank is divided into normal and water shortage
• Dirt water tank status: The status of the dirt water tank is divided into normal, full and shortage
• Brush roller status: The brush roller status is divided into normal and overflowing
• Light ring status: The light ring status is divided into charging, switching, operating and fault
• LED Banner status: The LED Banner status is divided into constant light and dynamic display
• Battery display: Real-time display of The status of dirt water tank is divided into normal, full and shortage battery consumption

Product maintenance

Clean main body (body)
To ensure that the performance of the machine is not affected, you are advised to maintain its components regularly

1. Please stop the machine and disconnect the power supply before cleaning.
2. Wipe with water or neutral detergent. Before scrubbing, be sure to wring the cleaning cloth dry, and do not infiltrate water into the electrical components of the machine.

TIPS: After cleaning, it is recommended to place the whole machine vertically on the charging base, and be careful not to place it in direct sunlight or wet places.

Clean dirt water tank

1. When the dirt water tank is full of dirt water, the machine will automatically shut down and give prompts through the display screen and voice.
2. If stubborn dirt is found on the inner wall of the dirt water tank, please clean it directly with a cleaning brush
3. After cleaning, close the cover of the dirt water tank, install it back to the machine body, after hearing the click, that means the installation is in place.

Clean the top cover of the dirt water tank

1. If the dirt water solid-liquid separator is found to be blocked, please clean it in time.
2. Remove the upper cover of the dirt water tank (Figure. 1) and wash it with clean water(Figure. 2).
3. After cleaning, install it into the dirt water tank.

Clean the filter

1. First take out the filter from above the dirt water tank (Figure. 1).
2. After taking it out, wash it with clean water (Figure. 2), and then dry it thoroughly before loading it into the dirt water tank.

Self-cleaning

1. Please put the machine back to the charging base in time after use.
2. When the machine enters the charging state, press the self-cleaning button on
3. After the cleaning, the machine continues to enter the charging state.Please clean the dirt water tank in time

TIPS

1. When the battery capacity is greater than 15%, it can start to clean itself. When the battery capacity is lower than 15%, it can start to clean itself only after charging.
2. Before and after using the self-cleaning function, please clean the dirt water in the dirt water tank.
3. If there is residual dirt on the charging base, please clean it in time.

Clean the brush roller transparent window
It is recommended to clean the brush roller transparent window regularly after each use to keep 

1.  To remove the brush roller transparent window, first apply your fingers to the position as shown in the figure and press the release buttons at both ends with your thumb and index finger to take out the roller brush transparent window (Figure 1).
2. After taking it out, rinse it with clean water until it is clean (Figure. 2).
3. After cleaning, install the brush roller transparent window into the base (Figuer. 3).

Clean the roller brush
It is recommended that the brush roller should be cleaned and dried after each use to keep it clean and tidy.
Warm tip : If you find any residual stains at the mouth of the suction nozzle, please wipe it with a wet cloth, and do not wash it with water.

1. Rotate the brush roller release button 90 degrees anticlockwise, and then pull it outward as a whole to take out the component of brush roller.

2. Remove the brush roller handle and use the complimentary brush roller cleaning brush to remove the hair or debris on the brush roller.
   

3. Then wash the brush roller with clean water and dry

4. After cleaning, first align the right side of the brush it in the air. roller with the driving head, then align the left side of the brush roller in place, and then turn the brush roller release button 90 degrees clockwise. After hearing the click, then the installation is in place successfully.

Troubleshooting

If the product still cannot work normally according to the above steps, please contact our after-sales service department for help.

Statistical Table of Hazardous Substances

The following table is compiled according to the Measures for the Administration of Hazardous Substances in electronic and electrical products.
The hazardous substances listed in the following table are based on ROHS directive 2011/65/EU of Hazardous Substances for Electronic and Electrical Products.

Attention

Indicates that the hazardous substance content in all homogeneous materials of the part is below the “ROHS directive 2011/65/EU limit requirements”
The content of the hazardous substance in at least one homogeneous material of the part exceeds the “ROHS directive 2011/65/EU limit requirements” and there is no mature alternative for the industry to meet the environmental requirements of the European Union RoHS Directive.
The number in this label indicates that the environmental protection life of the product under normal use condition is 10 years.

After-sales service

Warranty instructions

Host

| ****

Host

| ****

2 years

Battery

| ****

Battery

| ****

1 year

Suction machine| Suction machine| 5 years

Note: Filter components, rolling brush and cleaning brush are consumables without warranty

1. Please take good care of your purchase invoice and relevant vouchers as an important basis for warranty services.
2. During the warranty period, if the product fails and the common faults still cannot be eliminated after checking according to the instructions, please contact us at the national unified advisory Service hotline 400-995-1018
3. The company provides lifelong maintenance service for the products, but if the warranty period is exceeded, the customer shall pay the maintenance fee, material fee and transportation fee

Non-warranty coverage
Under the following circumstances, you cannot provide free warranty service for the machine within the warranty period

1. Failure to use according to the instructions in the manual, resulting in damage or failure due to improper use and neglect of care
2. Normal wear, wear parts, etc. (filter components, rolling brush, cleaning brush)
3. Abnormal blockage is not cleaned correctly according to the instructions
4. Non-absorbent products are used for damage or failure caused by water absorption
5. Damage or failure caused by using this product for any purpose other than normal household use
6. Damage or failure caused by use of non-original accessories or fittings, or repair or modification by unofficial repair centers
7. The battery discharge time is shortened due to battery aging or use
8. The installation is incorrect.

Warm reminder

Dear User,
In order to repair and return the machine, please be sure to keep the original packaging box! If your machine needs to be returned to the factory, please follow the steps below

Pre-shipment preparation
Call the customer service phone number 400-995-1018 to register your information and please complete the warranty card content and return the machine together with the factory. The important basis of warranty service is the purchase invoice and related vouchers. The warranty basis should be provided during maintenance. Please return the invoice of the whole machine (including the host, accessories and gifts) and the purchase voucher together.

Express mail
For relevant mailing information and other relevant information details, please contact the company’s national customer service phone number :400-995-1018. Thank you for your understanding and support of our work

Warranty card

Your name

|
---|---

Contact number

|

Contact address

|

Product model

|

Fuselage number

|

Invoice number

|

Order number

|

Date of purchase

|

Purchase channel

|

Delivery date

|
Fault description/

Fault cause

|

Use spare parts

|

Date of completion

|
Maintenance personnel signature|

SHENZHEN INXNI INNOVATION TECHNOLOGY CO.,LTD

**** After-sales service phone :400-995-1018 Official website: www.inxni.com

Address: Workshop Area 401, No. 1301-23, Guanguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen

Official public account

Documents / Resources

| Inxni Z3PRO Ultra Multifunctional High Speed Self Cleaning Floor Cleaner [pdf] Instruction Manual
Z3PRO Ultra Multifunctional High Speed Self Cleaning Floor Cleaner, Z3PRO, Ultra Multifunctional High Speed Self Cleaning Floor Cleaner, Speed Self Cleaning Floor Cleaner, Cleaning Floor Cleaner, Floor Cleaner
---|---

References

• INXNI 以内—以内扫吸拖一体机|INXNI以内洗地机|NXNI扫地机|以内扫吸拖机器人—以内创新

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>