SECURLITE NOT0870-C Systeo Unit Instruction Manual
- June 12, 2024
- SECURLITE
Table of Contents
SECURLITE NOT0870-C Systeo Unit Instruction Manual
Z.I des Ajeux – 72400 La Ferté-Bernard – France
Tél. : +33 (0)2 43 60 40 00 / Fax : +33 (0)2 43 60 40 09
Product, technical characteristics and features
Standard installation kit (to be ordered separately):
98540001: Surface mounting flange kit
98540002: Suspended mounting flange kit 3m
General characteristics:
Nominal voltage: 220 – 240V AC- 50 / 60 Hz
Input voltage range : 198 – 264V AC
Protection class : II
Protection rating : IP65
Mechanical impact resistance rating : 110 0 / 20j
Light source:
LED modules.
This product contains a light source of energy efficiency class C.
Power(s) : as per label product.
References) as per label product.
- 54xxxx00: without detection
- 54xxxx04: slave version + extinction warning
- 54xxxx05 : slave version + standby warning
- 54xxxx 16: with pro detection + radio control
- 54xxxx44 : with pro detection + radio control + extinction warnig
- 54xxxx45 : with pro detection + radio control + standby warning `
- 54xxxx21 : DAU dimmable + switch dimming
Other reference(e) with tirn(s). See specific instructions.
Conditions of use
Horizontal position: LED version.
Vertical positon : LED version (cable gland downwards).
Mounting / Installation
Fitting & installation must be carried out by a professional installer in accordance with current installation standards.
Isolate the power before fitting and connecting up.
Warning, versions employing LEDs are at risk from ESD (electrostatic discharges).
Mounting surface version :
Installation of the surface mounting flange kit 98540001 :
To fix the luminaire (centre distance B), use the mounting brackets supplied with 5mm diameter flat-head screws and plugs adapted to the type of support for optimum resistance to tearing (screws and plugs not supplied). Minimum distance to wall for locking 46.5mm (see Fig. 1).
Depending on the flatness of the surface, a clearance adjustment of 0 to 3mm is possible with the mounting flanges by positioning the value to be adjusted in the mounting direction (cf example Fig. 2).
- engage the luminaire on the mounting flanges.
- move the luminaire to the limit stop.
- screw the locking screw into the side flange (use the tip reference 98000036).
Use kit 98540002 (to be ordered separately).
For fixing distances (dimension B) please refer to the table in the chapter “Product, technical characteristics and features”.
Follow the assembly instructions on the assembly kit bag.
Cleaning
Cleaning of the luminaire is limited to cleaning the diffuser for proper light output. Clean the diffuser (with the luminaire closed) IA usin a damp cloth or with soapy water.
DO NOT USE DETERGENT
Maintenance
Recyclability
SYSTFO UNIT is an eco-designed luminaire :
- All the plastic or metal components can be dismantled and recycled via appropriate facilities.
- All the electronic components such as the LED circuit, power supply, etc. can be dismantled and recycled via appropriate facilities.