Wonbo Smart Watch L5 Owner’s Manual
- October 30, 2023
- Wonbo
Table of Contents
Wonbo Smart Watch L5
Smart Watch L5 User Manual
Thank you for choosing our product! To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first.
Part 1: Packing List
Check all the accessories if they are complete.
| Item No. | Accessories | Quantity |
|---|---|---|
| 1 | Wonbo Smart Watch L5 | 1 |
| 2 | User Manual | 1 |
| 3 | Charging Cable | 1 |
Part 2: Buttons Instruction
- Switch button: long press to switch on/off the device, short press to on/off the screen; short press in the operate interface to back homepage.
- Torchlight: Switch light on/off.
- Touch instructions: tap to select and enter a menu, slip right to return. At the home slide down into status bar; slide right into notification center; slide left to enter the main menu.
Part 3: Charging instruction
This product adopts magnetic force charging. Put the charging point connect to
the back of the device charging pins, it will charge automatically. It usually
takes 2 hours to full charging, device standby time up to 30 days, 5-7 days
for working. Do not use the watch when charging. Caution: Do not make the
magnetic charging
cable any 2 pins connect with conducting material at same time, it may cause
short circuit.
Part 4: Setting Up the Watch
Watch connect to Cellphone, you need yo download the App Fundo in the
cellphone at very first, see below 2 methods.
- Method 1: Scan the QR code in the watch (Setting-App download) or scan following QR code image to Download Fundo.
- Method 2: Search Fundo in Google Play Store or Apps Store. After installation, turn on cellphone Bluetooth and Fundo App, confirm the notifications and others permission Apps asks are enabled, and fill up personal information. Tap Add device, search L5XXX device (turn on the GPS in the smart phone before binding) and tap connect.
Usage Instructions
- Make sure all accessories are included in the packaging.
- To turn on/off the device, press and hold the switch button. To turn on/off the screen, press the switch button once. To go back to the homepage, press the switch button once in the operating interface.
- To turn on/off the torchlight, use the corresponding button.
- To select and enter a menu, tap on the screen. To return, swipe right. To access different areas of the watch, swipe up or down, left or right.
- To charge the watch, connect the charging point to the back of the device’s charging pins. It takes approximately two hours to fully charge and has a standby time of up to 30 days and working time of 5-7 days. Do not use the watch while charging.
- To set up the watch, download the Fundo app on your cellphone through either scanning the QR code on the watch or searching for it in the Google Play Store or App Store. Turn on Bluetooth and the Fundo app on your cellphone, allow notifications and other permissions, and fill in personal information. Tap “Add device,” search for L5XXX device (turn on GPS in the smartphone before binding), and tap connect.
Thank you for choosing our product! To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first.
Packing List
Part 1
Check all the accessories if they are complete
Buttons Instruction
Part 2
- Switch button: long press to switch on/off the device, short press to on/off the screen; short press in the operate interface to back homepage.
- Torchlight: Switch light on/off.
- Touch instructions: tap to select and enter a menu, slip right to return. At the home slide down into status bar; slide right into notification center; slide left to enter the main menu.
Charging instruction
Part 3
This product adopts magnetic force charging. Put the charging point connect
to the back of the device charging pins, it will charge automatically. It
usually takes 2 hours to full charging, device standby time up to 30 days, 5-7
days for working. Do not use the watch when charging.
Caution: Do not make the magnetic charging cable any 2 pins connect with
conducting material at same time, it may cause short circuit.
Setting Up the Watch
Part 4
Watch connect to Cellphone, you need yo download the App “Fundo” in the
cellphone at very first, see below 2 methods.
Method 1: Scan the QR code in the watch (“Setting”-App download) or scan
following QR code image to Download “Fundo”.
Method 2: Search “Fundo” in Google Play Store or Apps Store.
After installation, turn on cellphone Bluetooth and Fundo App, confirm the
notifications and others permission Apps asks are enabled, and fill up
personal information. Tap “Add device”, search “L5XXX” device (turn on the GPS
in the smart phone before binding) and tap connect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>