ring Alarm Window and Door Contact Sensor User Guide
- June 12, 2024
- Ring
Table of Contents
Let’s get started.
Quick Start
-
Make sure your Ring Alarm is disarmed.
-
In the Ring app, tap Set Up a Device and find the
Contact Sensor in the Security Devices menu. -
Follow the in-app instructions to complete setup.
Installation
- Install the sensor and magnet on a door or window and frame.
- Clean the area before you peel the backing and stick on the sensor and magnet.
- Make sure there is no more than 1 inch (25.4 mm) between the sensor and magnet when the door or window is dosed.
If you’re using the Contact Sensor on a door you use often, choose Main Door
as the placement option. Main doors have Entry and Exit Delays to prevent you
from accidentally triggering the alarm.
For additional help, visit: ring.com/help
Spacing
Ensure no more than 1 inch (25.4 mm) between sensor and magnet
when the door or window is dosed.
Leave at least a 1/2 inch (12.7 mm) space so you can open the battery
compartment.
Placement
©2022 Ping LLC or its affiliates.
Fung and ail related marks are trademarks of Fung LLC or its affiliates.
For Z-Wave technical information,
visitring.com/z-wave
23-005652-03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>