FluentPet Connect Wireless Talking Smart Button System User Manual
- June 12, 2024
- FluentPet
Table of Contents
Connect Wireless Talking
Smart Button System
User Manual
Connect Wireless Talking Smart Button System
START|
---|---
LINK|
RECORD| flnt.pt/app
LEARN| flnt.pt/start
CHANGE BATTERY|
SAFETY & WARRANTY
FLUENTPET CONNECT SOUND BUTTONS ARE NOT DESIGNED FOR UNSUPERVISED USE BY DOGS
(OR OTHER PETS). BY USING THESE PRODUCTS, YOU ARE AGREEING TO SUPERVISE YOUR
DOG (OR OTHER PET) IN THEIR USE OF THE SOUND BUTTONS AND HEXTILES. DO NOT USE
THE PRODUCTS IF YOUR DOG (OR OTHER PET) IS LIKELY TO TRY TO CHEW ON THE
PRODUCTS.
See more important safety information at
fluent.pet/safety For support and warranty
information visit fluent.pet/warranty
FCC COMPLIANCE AND ADVISORY STATEMENT:
This hardware device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this
device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed or used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment of and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or
relocate the receiving antenna; 2) increase the separation between the
equipment and the receiver; 3) connect the equipment to an outlet on a
circuit different from that to which the receiver is connected; 4) consult
the dealer or an experienced radio/ TV technician for help. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation
of the product, they must be used in order to ensure compliance with FCC
regulations.
INDUSTRY CANADA (IC) STATEMENT:
This device meets the IC requirements for RF exposure in public or
uncontrolled environments. Canadian Doc Statement: This digital device does
not exceed the Class B limits for radio noise emissions from digital apparatus
specified in the interference-causing equipment standard entitled “Digital
Apparatus,” ICES-003 of the Department of Communications. This device complies
with RSS-210 of Industry and Science Canada. Operation is subject to the
following two conditions:
- This device may not cause interferences
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC: 27655-FPCBT300
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance to this equipment would void the user’s authority
to operate this device.
This Device complies with FCC & IC radiation exposure (exemption) limits. FCC
ID: 2A2ZM-FPCBT300
© CleverPet, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>