hager KEB734P1 Tap Off Units For Busbar Trunking Instruction Manual
- June 12, 2024
- hager
Table of Contents
hager KEB734P1 Tap Off Units For Busbar Trunking
Product Information
Product model: KEB734P1, KEB735P1
Standards: IEC / EN 61439-1, IEC / EN 61439-6
Safety Information: This product has a risk of electric shock when live parts
are touched. Electric shocks can be fatal.
Product Usage Instructions:
- Installation and assembly of electrical equipment should only be performed by a qualified installer in accordance with the applicable installation standards, guidelines, regulations, provisions, and accident prevention regulations of the respective country.
- Strictly follow the warnings on the device.
- Do not exceed any allowable maximum values.
- Follow the assembly instructions provided for the built-in devices.
- The tap-off box should not be used for power supply in the busbar system (IEC 61439-6).
- Failure to comply with the installation instructions may result in damage to the device, fire, or other hazards.
- This manual is part of the product and should be kept by the end user.
- Danger: There is a risk of electric shock when touching live parts. Electric shocks can be fatal. Please refer to the specific technical specifications and diagrams provided in the user manual for further details on the product’s type label, main circuit specifications, and dimensions. Note: The text-extract from the user manual does not provide complete information on the product.
Please consult the full user manual for detailed instructions and information on usage, maintenance, and safety precautions.
Tap-off box, size 4, free design
Safety Information
- Electrical devices may only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, guidelines, regulations, directives, safety and accident prevention regulations of the country.
- Always comply with the warning information on the device!
- Do not exceed any approved maximum values.
- Observe the mounting instructions of the installed devices.
- The tap-off box may not be used to supply energy into the busbar system (IEC 61439-6).
- Failure to comply with these installation instructions may result in damage to the device, fire or other hazards.
- These instructions are an integral component of the product and must be retained by the end user.
DANGER!
Electric shock when live parts are touched!
An electric shock can lead to death!
- Isolate all connection cables before working on the device and cover any live parts in the area!
- Disconnect all the parts of the busbar system which have an electrical connection to the empty tap-off box from it.
Details on the type label
Main circuit:
- Ue Rated operating voltage
- fn Rated frequency range
- Icc Conditional rated short-circuit current
- ISize Size, tap-off box
- Inc Rated current (for MCCB: Value of the overload trigger)
- Imax Max. rated current of the fuse-link
TOOLS
WHAT’S IN THE BOX
DIMENSION
INSTRUCTION
T +49 6842 945 0 F +49 6842 945 4625 info@hager.com hager.com – 03.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>