TECTITE FSBBOXWM Washing Machine Outlet Box Instructions

June 4, 2024
TECTITE

TECTITE FSBBOXWM Washing Machine Outlet Box Instructions
TECTITE FSBBOXWM Washing Machine Outlet Box

Installation Instructions

  1. Turn off and fully drain water supply to involved piping.
  2. Attach brackets to the studs making sure the outlet box can attach to the brackets on both sides.
  3. Connect the cold water line to the Tectite by Apollo Push-To-Connect valve with the blue handle. Connect the hot water line to the Tectite by Apollo Push-To-Connect valve with the red handle.
  4. Secure water lines into place to prevent movement.
  5. After sheet rock is installed and painted, press faceplate into place.
  6. Attach the supply lines to the valves and attach to the washing machine.
  7. Turn on water supply. Check valves and hoses for leaks.

To Change Valve Configuration

Tools Required: 8mm hex key & crescent wrench

  1. Using a crescent wrench, hold the valve body in place at the base of the inside of the appliance box.
  2. Insert an 8mm hex key into the Tectite by Apollo push-to-connect fitting until it seats properly and turn counter-clockwise completely removing the fitting from the valve body.
  3. Remove the slim retaining nut which will allow for the removal of the valve body.
  4. Turning the box 180º so the top becomes the bottom will reveal knockouts for a side oriented drain and the appropriate valve placement locations.
  5. Insert the valves, tighten the retaining nut and push fittings back into place. The integrated o-ring design  eliminates the need for the use of thread tape or sealant.
Push Installation
  1. Cut pipe

  2. Mark insertion depth using the depth gauge
    (sold separately).
    Installation instruction

  3. Push pipe (A) and  twist (B) into fitting until fitting edge meets depth line.

Push Removal
  1. Removal tool
    (sold separately).

  2. Place tool around pipe next to fitting. Press tool toward fitting while pulling pipe from fitting.

Pipe Depth for Tectite Fittings
Fitting/Pipe Size Insertion Depth
1″ 1-5/16″
3/4″ 1-1/8″
1/2″ 15/16″
3/8″ 15/16

Support

The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
www.apolloflow.com
Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals