Hartmobility TSGA601 Titan Floor to Ceiling Stability Pole Instruction Manual
- June 12, 2024
- Hartmobility
Table of Contents
Hartmobility TSGA601 Titan Floor to Ceiling Stability Pole
Product Information
The TSGA601 RotoBar is a grab bar designed to provide additional support and stability for individuals with limited mobility. It consists of a rotating grab bar, a Titan pole, and various parts for installation.
Safety Information
IMPORTANT: If you are unsure that you can install this product correctly, hire a qualified professional. If you have any questions, please contact Customer Care.
Kit Contents
All necessary tools for installation are included in the kit.
PRODUCT INFORMATION
This TSGA601 SafetyGrip® RotoBar comes with our patented Interlocking SafetyGrip®. The TSGA601 is protected with AlphaSan® technology, which provides lasting protection against microbial contamination to all Hart Mobility products, delivering unrivaled anti-microbial performance.
- The TSGA601 Safety Grip RotoBar is designed to be used with the TSG610; TSG615 & TSG650 Poles.
- The TSGA602 is designed to assist with balance, sitting up, positioning and stability for persons weighing up to 350lbs (158kg) and is not designed to bear the full weight of the user.
Installation
Notes:
- If you purchased the TSGA601 RotoBar and the Titan pole together, follow Steps 1 through 4 below.
- If you already have the Titan pole installed, you will need to loosen it and lay it on the floor.
Step 1: Slide the Rotating Grab Bar and parts onto the Pole
Slide the RotoBar assembly and the other parts onto the Titan pole from the
bottom. Follow the sequence shown on the Step 1 drawing.
Step 2: Finish Installing the Pole
Finish installing the Titan pole by following the Pole Assembly
Instructions provided with the Titan pole.
Step 3: Decide how high you want the RotoBar
When the Titan pole is assembled and standing between the floor and
ceiling, you can decide how high you want the RotoBar to be from the floor.
Move the bottom Cogs Collar up the Pole to this height. Note that this bottom
Cogs Collar will be the height of the bottom horizontal RotoBar. Securely
tighten the three Security Screws in the bottom Cogs Collar with the provided
Hex Key.
Step 4: Install the Plastic Stop
Install the Plastic Stop Ring into the bottom of the RotoBar with the two
screws provided. Test that the RotoBar lifts off the internal cogs, rotates
smoothly, and drops down into the cogs.
Maintenance
The TSGA601 Grab Bar may loosen with use. It is recommended to check the Security Screws in the bottom Cogs Collar weekly and tighten if necessary. To clean your RotoBar, simply wipe it with a clean cloth and any commercially available cleaning solution.
Limited Warranty
Hartmobility Inc. provides a limited lifetime parts warranty for the TSGA601 RotoBar. This warranty covers defects in design and workmanship. Hartmobility Inc. will correct any defects in parts or workmanship at no charge. Please note that the warranty does not cover product failure due to installation error, owner misuse, abuse, negligence, or normal wear and tear.
TITAN POLE ACCESSORY with SafetyGrip® TSGA601
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>