hansgrohe 71571000 Vernis Blend 100 Single Lever Basin Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe 71571000 Vernis Blend 100 Single Lever Basin Mixer
- Product Information
- Safety Notes
- Installation Instructions
- Technical Data
- Adjustment
- Dimensions
- Flow diagram
- Spare parts
- Special accessories
- Cleaning
- Operation
- ASSEMBLT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 71571000 Vernis Blend 100 Single Lever Basin Mixer
Product Information
- Product Name: Vernis Blend
- Model Numbers: 71550XXX, 71557000, 71558XXX, 71570000, 71587000, 71584XXX, 71534004, 71551XXX, 71559000, 71571000, 71580XXX, 71588000,71585XXX, 71210XXX, 71218XXX
- Variants: Vernis Blend 70, Vernis Blend 70 CoolStart, Vernis Blend 100, Vernis Blend 100 CoolStart
- Available Colors: Chrom, Mattschwarz (Chrome Plated, Matt Black)
- Safety Features: Gloves should be worn during installation to prevent crushing and cutting injuries. The product is exclusively designed for drinking water.
- Technical Specifications:
- Operating Pressure: max. 1 MPa
- Recommended Operating Pressure: 0.1 – 0.5 MPa
- Test Pressure: 1.6 MPa
- Hot Water Temperature: Not specified
- Flow Limiter: Yes Product
Usage Instructions:
- Safety Notes:
- Wear gloves during installation to prevent crushing and cutting injuries.
- The product is intended for bathing, hygienic, and body cleaning purposes only.
- Ensure that the hot and cold water supplies have equal pressures.
- Installation Instructions:
- Follow the provided assembly instructions (see page 33) for proper installation.
- Ensure that the recommended operating pressure of 0.1
- 0.5 MPa is maintained.
- Connect the hot and cold water supplies to the appropriate inlets of the product.
- Use the provided flow limiter if necessary.
- Do not use silicone containing acetic acid.
- Cleaning: – Refer to page 43 for detailed cleaning instructions.
- Operation: – Refer to page 36 for information on operating the product.
- Test Certificate: – Refer to page 44 for the test certificate.
- Adjustment: – To adjust the hot water limiter, follow the instructions provided on page 35. – Note that using a hot water limiter with a continuous-flow water heater is not recommended.
- Dimensions: – Detailed dimensions of the product can be found on page 40. Please consult the complete user manual for additional information and instructions.
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol Description
Do not use silicone containing acetic acid!
Adjustment
To adjust the hot water limiter.
Using a hot water limiter in combination with a continuous-flow water heater is not recommended.
Dimensions
Flow diagram
Vernis Blend 70
71550XXX / 71557000 / 71558XXX /
71570000 / 71587000
Vernis Blend 70 CoolStart
71584XXX / 71534004
Vernis Blend 100
71551XXX / 71559000 / 71571000 /
71580XXX / 71588000
Vernis Blend 100 CoolStart
71585XXX
Spare parts
Vernis Blend 70
71550XXX / 71557000 / 71558XXX / 71587000
Vernis Blend 100
71551XXX / 71559000 / 71580XXX / 71588000
Vernis Blend 70 CoolStart
71584XXX / 71534004
Vernis Blend 100 CoolStart
71585XXX
Vernis Blend 70
71570000
Vernis Blend 100
71571000
- XXX = Colors
- 000 = Chrome Plated
- 670 = Matt Black
Special accessories
(order as an extra)
- special tool #58085000 (see page 33)
- Installation putty (see page 34)
- seal #98996000 (see page 33)
Cleaning
Cleaning recommendation / Warranty / Contact
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
Operation
Vernis Blend 70
71550XXX / 71557000 / 71558XXX /
71570000 / 71587000
Vernis Blend
71210XXX / 71218XXX
open
cold
Vernis Blend 100
71551XXX / 71559000 / 71580XXX / 71571000 / 71588000
close
hot
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate
ASSEMBLT
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>