Boxtech 4346783286 Aquarium Hang On Filter Installation Guide
- June 12, 2024
- Boxtech
Table of Contents
Boxtech 4346783286 Aquarium Hang-On Filter
Q&A
Why does the aquarium filter make noise or shake when it is working?
- Before powering up, you must make sure that there is water in the filter.
- Use the fixed button at the bottom of the filter to fix the working position of the filter.
- Increase the amount of water in the tank. When the water level is close to the outlet of the equipment, the mute effect will be better.
Why does the fish filter not work?
- Please fill the filter with water before inserting it, otherwise, the motor will burn out.
- Make sure that the water level in the tank is as close as possible to the outlet of the filter waterfall. If the water level is too low and the motor cannot pump water, it will also produce a lot of noise.
- Please make sure that the water control valve is tightly plugged, otherwise, the aquarium filter will make a noise and will not work properly.
- If the filter still does not work, please contact our customer service.
Why does the filter start to make noise after running for a period of time?
- The water in the tank will gradually evaporate, and you need to add water to the tank regularly.
How often should I clean and replace the cartridge?
- Replacement cartridges for filters need to be cleaned or replaced frequently: if there are several feedings, we recommend cleaning every two weeks; otherwise, you can clean once a week
LIST OF ACCESSORIES
- Pumpping pipe
- Bio foam 1
- Connector
- Filter cartridge
- Bio foam 2
- Bottom Fixing Buckle
- Filter body
- Upper cover
INSTALLATION DIAGRAM
Read User Manual Online (PDF format)
Loading......