Jabra Elite 85t – Grey Instructions
- June 12, 2024
- Jabra
Table of Contents
Elite 85t – Grey
Instructions
Jabra Elite 85t – Grey
How do I pair my Jabra Elite 85t with my mobile device?
To pair with your smartphone, tablet, or mobile device, follow these
steps.
-
Turn on the Bluetooth setting on your mobile device.
-
Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press the Left and Right buttons.
The LEDs on both earbuds will flash green. -
To enter pairing mode, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds, until the LED on the right earbud flashes blue.
The earbuds are now ready to pair with your mobile device. -
To pair, go to the Bluetooth menu on your mobile device and select the Jabra Elite 85t from the list. Alternatively, wear the earbuds to hear the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
If you pair with two mobile devices, use this process separately for each
mobile device. After pairing with both mobile devices, you will need to
reselect the Jabra Elite 85t in the Bluetooth settings on the first mobile
device. This will complete the pairing process for both mobile devices.
In daily use, when you turn on the earbuds, they will automatically reconnect
with the last previously paired device, if it is turned on and within range.
To pair with your smartphone, tablet, or mobile device using only the right earbud, follow these steps.
-
Turn on the Bluetooth setting on your mobile device.
-
Turn off the right earbud manually by pressing the Right button until the LED flashes red.
-
To enter pairing mode, press and hold (3 seconds) the Right button until the LED flashes blue.
The earbud is now ready to pair with your mobile device. -
To pair, go to the Bluetooth menu on your mobile device and select the Jabra Elite 85t from the list. Alternatively, wear the earbud to hear the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
If pairing is successful, your earbuds will appear in the list of connected Bluetooth devices on your mobile device. The Bluetooth connection will also be announced in the earbuds.
Note
Images are for guidance purposes only. The displayed image may differ slightly
from your device, however the content is still relevant and accurate.
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see
here. Optionally, try using
the Bluetooth Pairing Guide which provides detailed steps for
pairing with a mobile device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>