hansgrohe Raindance 26252000 Overhead Showers Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe Raindance 26252000 Overhead Showers
- Product Information
- Product Installation Instructions
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol Description
- INSTALLATION
- Dimensions
- Spare parts
- Cleaning
- Test certificate
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe Raindance 26252000 Overhead Showers
Product Information
The product is a showerhead available in different sizes and types:
- Raindance E 400 x 400 mm Air 1jet 26252000
- Raindance E 400 x 400 mm Air 1jet EcoSmart 9 l/min 26253000
- Raindance 260 x 260 mm Air 1jet 26472XXX
- Raindance 260 x 260 mm Air 1jet EcoSmart 9 l/min 26481XXX
The showerhead has a maximum operating pressure of 0.6 MPa and a recommended operating pressure of 0.17 – 0.4 MPa. The product is designed for drinking water and should not be used for any other purpose.
Product Installation Instructions
Follow the instructions provided in the user manual for installation. Wear
gloves during installation to prevent crushing and cutting injuries. Do not
use silicone containing acetic acid.
Refer to the flow diagram and dimensions provided on page 21 of the user
manual to ensure correct installation.
Cleaning
Refer to page 25 of the user manual for instructions on cleaning the
showerhead.
Thermal Disinfection
Refer to the user manual for instructions on thermal disinfection.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic and body cleaning purposes.
- Children as well as adults with physical, mental and/ or sensoric impairments must not use this product without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this product.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,17 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol Description
- Do not use silicone-containing acetic acid!
- Dimensions
- Flow diagram
- Spare parts
- Cleaning
- Test certificate
INSTALLATION
Dimensions
Raindance 260 x 260 mm Air 1jet
26472XXX
Raindance 260 x 260 mm Air 1jet EcoSmart 9 l/min
26481XXX
-
Raindance 260 x 260 mm Air 1jet
-
Raindance 260 x 260 mm Air 1jet EcoSmart 9 l/min
Raindance E 400 x 400 mm Air 1jet
26252000
Raindance E 400 x 400 mm Air 1jet EcoSmart 9 l/min
26353000
- Raindance E 400 x 400 mm Air 1jet
- Raindance E 400 x 400 mm Air 1jet EcoSmart 9 l/min
Colors
- 000 = Chrome
- 250 = Brushed Gold-Optic
- 340 = Brushed Black Chrome
Spare parts
- Raindance 260 x 260 mm Air 1jet
- Raindance 260 x 260 mm Air 1jet EcoSmart 9 l/min
-
Raindance E 400 x 400 mm Air 1jet
-
Raindance E 400 x 400 mm Air 1jet EcoSmart 9 l/mi
Cleaning
Cleaning recommendation / Warranty / Contact
- www.hansgrohe.com/cleaning-recommendation
- www.hansgrohe.com/cleaning-recommendation
- www.hansgrohe.com/cleaning-recommendation
- www.hansgrohe.com/cleaning-recommendation
Just clean: simply rub over the spray nozzles to remove lime scale.
Test certificate
CONTACT
- Address: Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach ·
- Telefon +49 (0) 78 36/51-1282 ·
- Telefax +49 (0) 7836/511440
- E-Mail: info@hansgrohe.com ·
- Internet : www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>