AkoestiPanel 2440 mm Basic Panel Instruction Manual
- June 12, 2024
- AkoestiPanel
Table of Contents
AkoestiPanel 2440 mm Basic Panel
Product Information
AkoestiPanel Basic Panel
The AkoestiPanel Basic Panel is an acoustic panel designed to improve the sound quality of a room. It is mounted directly onto awall using screws and is made up of a frame and acoustic material. The panel is available with a ‘Screw mounting’ option for easy installation.
The panel requires the following tools for installation: spirit level, pencil, drill, wall plugs, screws, and additional help during the mounting process.
Product Usage Instructions
How to mount the AkoestiPanel Basic Panel in 6 steps
- Pull up a small piece of the acoustic material from the frame where you would like to attach the frame to the wall.
- The frame is mounted directly to the wall using screws. This requires you to drill through the frame. Drill approximately one hole per meter using a 4 mm metal drill bit. This way, you prevent the frame from sagging.
- Next up, level out the frame using a spirit level and draw drilling holes on the wall through the pre-drilled holes in theframe with a pencil.
- Drill the holes in the wall using a drill. Then push a wall plug into each of the drilled holes. The type of plugs that you need to use depends on the type of wall.
- You can now mount the panel to the wall using screws. Make sureto use screws that are compatible with the type of plugs that you use. This step is best done with 2 people.
- Lastly, push the acoustic material back into the frame.
Follow these instructions carefully to ensure proper installation and maximum effectiveness of your AkoestiPanel Basic Panel.
How to mount the AkoestiPanel Basic panel in 6 steps
Use this manual in case you’ve selected the ‘Screw mounting’ option when ordering. During this mounting procedure, you will need:
- Spirit level
- Pencil
- Drill
- Wall plugs
- Screws
- Additional help when mounting the frame
Assembly
Step 1
Pull up a small piece of the acoustic material from the frame where you would
like to attach the frame to the wall.
Step 2
The frame is mounted directly to the wall using screws. This requires you to
drill through the frame. Drill approximately one hole per meter using a 4 mm
metal drill bit. This way, you prevent the frame from sagging.
Step 3
Next up, level out the frame using a spirit level and draw drilling holes on
the wall through the pre drilled holes in the frame with a pencil.
Step 4
Drill the holes in the wall using a drill. Then push a wall plug into each of
the drilled holes. The type of plugs that you need to use depends on the type
of wall.
Step 5
You can now mount the panel to the wall using screws. Make sure to use screws
that are compatible with the type of plugs that you use. This step is best
done with 2 people.
Step 6
Lastly, push the acoustic material back into the frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>