hansgrohe AXOR CARLTON Basin Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe AXOR CARLTON Basin Mixer Instruction Manual
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The shower system may only be used for bathing, hygienic and body cleansing
purposes.
The hot and cold supplies must be of equal pressures.
Do not allow the streams of the shower touch sensitive body parts (such as
your eyes). An adequate distance must be kept between the shower and you.
The product may not be used as a holding handle. A separate handle must be
installed.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- The mesh washer must be insert to protect the overhead shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
- Connections G 1/2 : cold right – hot left anti-pollution function
Symbol description
Maintenance non return valve (see page 38)
The non return valves must be checked regularly according to DIN EN 1717 in accordance with national or regional regulations (at least once a year).
Maintenance Secuflex hose (see page 38)
Repeat cleaning when pull out becomes difficult.
Do not use silicone containing acetic acid!
Dimensions (see page 35)
Flow diagram (see page 35)
- Hand shower
- Bath Spout
Spare parts (see page 37)
**XXX = Colors
**
000 = chrome plated
090 = chrome plated/gold plated
Operation (see page 36)
Cleaning (see page 40) and enclosed brochure
Test certificate (see page 34)
Assembly Instruction
17445000 P-IX 9087/ICB
Carlton 17445XXX
Carlton 17445XXX
open and close
cold and hot
Setting
Cleaing
