hansgrohe METROPOL E Lever Basin Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe METROPOL E Lever Basin Mixer Instruction Manual
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The shower system may only be used for bathing, hygienic and body cleansing
purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa
Do not use
silicone containing acetic acid!
Assembly Instructions
Dimensions
Metropol E
14033XXX
Metropol E
14233XXX
Flow diagram
Metropol E
14033XXX
Metropol E
14233XXX
- with EcoSmart®
- without EcoSmart®
Operation
hot
cold
open
Cleaning
The QuickClean cleaning function only needs a small manual rub over to remove the lime scale from the spray channels.
Spare parts
XXX = Colors
000 = chrome plated
090 = chrome plated/gold plated
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Test certificate
| P-IX| DVGW| SVGW| WRAS| KIWA| NF| ACS| ETA
---|---|---|---|---|---|---|---|---
14033XXX| P-IX 18454/IA| | X| | | | X|
14233XXX| P-IX 18454/IA| | X| | | | X|
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78
36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>