hansgrohe AXOR STARCK Classic Lever Bidet Faucet Instruction Manual

hansgrohe AXOR STARCK Classic Lever Bidet Faucet

Product Information

The product is a shower system. The user manual is provided in multiple languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Bulgarian and Arabic. The manual provides safety instructions, technical data, installation instructions, and operating instructions.

• Safety Instructions: The manual provides safety instructions for preventing crushing and cutting injuries during installation. It also advises the users to use the shower system only for bathing, hygienic and body cleansing purposes.
• Installation Instructions: The manual provides installation instructions including the need to wear gloves during installation to prevent injuries. It also advises users to ensure that the hot and cold supplies are of equal pressures. The installation kit is not included in the package and needs to be ordered separately as an extra.
• Technical Data: The shower system has a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The hot water temperature and recommended hot water temperature are also provided. The manual also advises against the use of silicone-containing acetic acid.
• Operating Instructions: The manual provides operating instructions for using the shower system and advises users to clean it regularly.

Product Usage Instructions

To use the shower system safely and effectively, follow the below instructions:

• Use the shower system only for bathing, hygienic and body cleansing purposes.
• Ensure that the hot and cold supplies are of equal pressure.
• Wear gloves during installation to prevent crushing and cutting injuries.
• Do not use silicone-containing acetic acid.
• Clean the shower system regularly.

To install the shower system, follow the below instructions:

• Order the installation kit separately as an extra as it is not included in the package.
• Ensure that the hot and cold supplies are of equal pressure.
• Wear gloves during installation to prevent crushing and cutting injuries.
• Follow the assembly instructions provided on page 31 of the manual.

Models

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic, and body cleansing purposes.
• The hot and cold supplies must be of equal pressure.

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 80°C
• Recommended hot water temp.: 65°C

Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Symbol Description

• Do not use silicone-containing acetic acid!

Assembly

Dimensions

Flow diagram

• with EcoSmart®
• without EcoSmart®

Spare parts

Special accessories

• special tool (58085000) order as an extra
• Installation kit order as an extra

Operation

Open

Close

Cold

Hot

Cleaning
see the enclosed brochure.

Test certificate

Hansgrohe
Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com. Internet: www.hansgrohe.com.

References

• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>