hansgrohe AXOR UNO2 Faucet Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe AXOR UNO2 Faucet
Product Information
The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. It comes with installation and assembly instructions in multiple languages, including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian and Bulgarian. The product has technical specifications such as a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The hot and cold water supplies must have equal pressures. The aerator does not meet the DIN EN 246 standard. The product comes with spare parts and special accessories that can be ordered separately.
Product Usage Instructions
Before using the shower system, make sure that the hot and cold water supplies have equal pressures. Wear protective gloves during installation to prevent crushing and cutting injuries. The shower system should only be used for bathing, hygienic and body cleansing purposes.
To install the shower system, refer to the assembly instructions provided in the user manual. The product has a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The hot water temperature should not exceed the recommended temperature. Do not use silicone-containing acetic acid during installation. The product comes with spare parts and special accessories that can be ordered separately. If required, order the installation kit and special tool (58085000) separately.
For cleaning recommendations, refer to the enclosed brochure. Test certificate is also provided in the user manual.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
The aerator is not equal to DIN EN 246
Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol Description
- Do not use silicone-containing acetic acid!
Assembly
Dimensions
Flow diagram
- with EcoSmart®
- without EcoSmart®
Uno²
38040000/38045000/38047000
Uno²
38222000
Uno²
38222000
Spare parts
Special accessories
- special tool (58085000) order as an extra
- Installation kit order as an extra
Operation
open
close
Cleaning
For cleaning recommendations, see the enclosed brochure.
Test certificate
| P-IX | DVGW | SVGW | WRAS | KIWA | NF | ACS | ETA | |
|---|---|---|---|---|---|---|---|---|
| 38040000 | P-IX 9864/IA | X | X | X | X | |||
| 38045000 | P-IX 9864/IA | X | ||||||
| 38047000 | P-IX 9864/IA | X | ||||||
| 38222000 | P-IX 9864/IA | X | X |
Hansgrohe
Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax
+49 (0) 7836/511440
E-Mail: info@hansgrohe.com. Internet:
www.hansgrohe.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>