hansgrohe TALIS S2 VARIARC Lever Sink Faucet Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
Instructions for use
assembly instructions
TALIS S2 VARIARC Lever Sink Faucet
Instruction Manual
TALIS S2 VARIARC Lever Sink Faucet
**** Safety Notes
Gloves should be worn during installation to preventcrushing and cutting
injuries.
The hot and cold supplies must be of equal pressures.
**** Only dishwashers and washing machines certified with the DVGW emblem may
be connected to the appliance connection valve without an additional fuse. If
no consumer is connected to the appliance connection valve, it must be
plugged.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms!
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Rate of flow by 0,3 MPa: 10 l/min
Hansgrohe mixers can be used together with hydraulically and thermically
controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
To adjust the hot water limiter on single lever mixers, please see page 23. No
adjustment is necessary when using a continuous flow water heater.
Do not use silicone containing acetic acid!
Dimensions (see page 20)
Spare parts (see page 22)
Operation (see page 21)
Cleaning see enclosed brochure.
Assembly see page 17
Assembly
Dimensions
Operation
|
---|---
open| close
|
hot| cold
|
open| close
XXX = Colors
000 = chrome plated
800 = stainless steel optic Test certificate
| P-IX| DVGW| SVGW| ACS| WRAS| NF| KIWA
---|---|---|---|---|---|---|---
14870XXX| P-IX 9481/IA| | X| X| X| | X
14875XXX| PA-IX 19374/IA| | | | | |
Postfach 1145
D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
12/2010
9.09726.10
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>