hansgrohe 14445180 Internal Element for 4-Hole Tap Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 14445180 Internal Element for 4-Hole Tap
Product Information
The product is a faucet that can be used for hot and cold water supply. It comes with installation and usage instructions in multiple languages including German, French, English, Italian,Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish,Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian,Estonian, Latvian, Serbian, Bulgarian, and Arabic.
The technical specifications of the product are as follows:
- Operating pressure: maximum 1 MPa
- Recommended operating pressure: 1.6 MPa
- Test pressure: 1.6 MPa
- Hot water temperature: recommended temperature
- Rate of flow by 0.3 MPa: approximately 22 l/min
- Connections G 1/2
The product comes with spare parts and a test certificate. It should not be installed using silicone containing acetic acid.
Product Usage Instructions
During installation, it is important to wear gloves to prevent crushing and cutting injuries. The hot and cold supplies must be of equal pressures to ensure proper functioning of the faucet.
The fitting must be installed according to the provided instructions and tested after installation to ensure it meets valid norms.
To use the faucet, turn the knob to the left for hot water and to the right for cold water.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
The fitting must be installed, flushed and tested after the valid norms!
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
- Rate of flow by 0,3 MPa: approx. 22 l/min
- Connections G 1/2: cold right – hot left
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Spare parts
Test certificate
Assembly
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com