hansgrohe 15754000 Metris Classic Ecostat Classic High Flow Thermostat Instruction Manual

: June 12, 2024
: hansgrohe

hansgrohe 15754000 Metris Classic Ecostat Classic High Flow Thermostat

Product Information

The product is a shower system with the model name “Metris Classic / Talis Classic” and the model number “15754XXX”. The product comes with user manuals and installation instructions in different languages including German, French, English, Italian,Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian and Bulgarian. The product has technical specifications such as an operating pressure of 1.6MPa, a recommended operating pressure of approximately 58 l/min and a hot water temperature that can be adjusted to the recommended temperature. The shower system has safety features such as a safety function and anti-pollution function. The product requires regular maintenance and should not be used with silicone containing acetic acid.

Product Usage Instructions

Before using the shower system, ensure that the hot and cold supplies have equal pressures. The shower system should only be used for bathing and body cleansing purposes. Children and individuals with physical, mental or sensoric impairments should use the shower system under proper supervision. Individuals under the influence of alcohol or drugs should not use the shower system.

Installation Instructions

During installation, it is important to wear gloves to prevent crushing and cutting injuries. The fitting should be installed, flushed and tested after valid norms. After installation, check the output temperature of the thermostat and make necessary corrections if the temperature differs from the temperature set on the thermostat.

Maintenance Instructions

The shower system requires regular maintenance and cleaning. The regulator filter and shower filter seal should be cleaned if they become dirty. Do not use silicone containing acetic acid to clean the shower system.

Safety Instructions

The shower system has safety features such as a safety function and anti- pollution function. The safety function should be checked regularly to ensure that it is working properly. Individuals under the influence of alcohol or drugs should not use the shower system. Children and individuals with physical, mental or sensoric impairments should use the shower system under proper supervision.

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The shower system may only be used for bathing, hygienic and body cleansing purposes.
Children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
The hot and cold supplies must be of equal pressu-res.

Installation Instructions

The fitting must be installed, flushed and tested after the valid norms!

Technical Data

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5MPa
Test pressure: 1,6MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Rate of flow by 0,3 MPa anti-pollution function: approx. 58 l/min

Adjustment

After the installation, the output temperature of the thermostat must be checked. A correction is necessary if the temperature measured at the output differs from the temperature set on the thermostat.

Maintenance

To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold.
The mixer is equipped with non return valves. The non return valves must be checked regularly according to DIN EN 1717 in accordance with national or regional regulations (at least once a year). At this time, please also check the filter (A) situated on the BTC-thermoele-ment (96633000). After assembling the BTC-thermoelement, it is necessary to check the water temperature at the take off point as described under the headline „adjustment“. Before the adjustment, please check, if the warm water supply is activated and the maximum temperature of the warm water is available at the take off point.

hansgrohe-15754000-Metris-Classic-Ecostat-Classic-High-Flow-Thermostat-
FIG-6