Hansgrohe AXOR Bouroullec, Massaud, Urquiola Lever Shower Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
Hansgrohe AXOR Bouroullec, Massaud, Urquiola Lever Shower Mixer
Product Information:
The user manual provides instructions in multiple languages for the product usage and installation. The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. The hot and cold supplies must be of equal pressures. The operating pressure of the shower system is 1.6 MPa. The shower system comes with a symbol description and a flow diagram. The user manual also provides technical data, cleaning recommendations, spare parts information, and test certificate details.
Product Usage Instructions:
- Wear gloves during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Ensure that the hot and cold supplies have equal pressures.
- To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous-flow water heater.
- Do not use silicone-containing acetic acid!
- Follow the dimensions and flow diagram provided on page 34 for installation.
- For cleaning recommendations, refer to the enclosed brochure.
- In case of any faults, refer to the fault list provided on page 4 for possible causes and remedies.
- Assembly instructions are provided on page 31.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic, and body cleansing purposes.
- The hot and cold supplies must be of equal pressure.
Installation Instructions
The fitting must be installed, flushed, and tested after the valid norms.
Hansgrohe mixers can be used together with hydraulically and thermally
controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
anti-pollution function
Symbol Description
-
Do not use silicone-containing acetic acid!
-
To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous-flow water heater.
-
**Dimensions (see page 34)
**
- Flow diagram
**(see page 34)
**
-
Operation (see page 35)
-
Cleaning
Cleaning recommendations, see enclosed brochure.
-
Spare parts (see page 36)
-
Test certificate (see page 35)
Assembly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>