RONSEAL 151222 One Coat Fence Life Medium Oak 9Ltr User Manual
- June 12, 2024
- RONSEAL
Table of Contents
RONSEAL 151222 One Coat Fence Life Medium Oak 9Ltr
Product Information
The Ronseal Sprayable Fence Life is a product that is designed to be used for painting and protecting wooden fences. It is a quick and easy way to apply the paint to the fence, without having to use a brush or roller. The product comes in a container that can be used with a sprayer, making it easy to apply the paint evenly to the fence. The Fence Life is available in a range of colors to suit your preferences.
Product Usage Instructions
- Before using the Ronseal Sprayable Fence Life, make sure to give it a good shake and stir, as this is normally the only preparation required.
- If the Fence Life has thickened up due to storage or cold temperatures, it’s best to leave it out in the sun or somewhere warm before pouring it into the sprayer. If it still looks thick, add some warm water, but do not dilute it more than 10%. Then give it another good stir.
- If you have already tried spraying and it’s not coming out, checkpoint 2 above. Clean the filters in the handle and nozzle before trying to spray it again.
- Once the Fence Life is ready, pour it into the sprayer and make sure that all parts are securely attached. Test the sprayer on a small area first, to ensure that the paint is being applied evenly and there are no blockages.
- Start spraying from the top of the fence and work your way down. Use even strokes and keep the sprayer at a consistent distance from the fence. Avoid spraying in windy conditions or when rain is forecasted.
- Allow the first coat to dry before applying a second coat if necessary. Follow the drying times on the product label.
- Clean the sprayer thoroughly after use, following the manufacturer’s instructions.
Additional User Instructions
How to prepare your Fence Life for Spraying
- Give your Ronseal Sprayable Fence Life a good shake and a stir, this is normally the only prep you need.
- Fence Life can thicken up when in storage and when it gets cold. It’s best to leave it out in the sun or somewhere warm before pouring it into your sprayer. If it looks really thick, add a bit of warm water. Don’t dilute it more than 10%. Then give it another good stir.
If you‘ve already tried spraying and it’s not coming out, checkpoint 2 above. Clean the filters in the handle and nozzle before trying to spray it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>