hansgrohe 74806000 Zesis M33 Lever Kitchen Faucet 150 Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe 74806000 Zesis M33 Lever Kitchen Faucet 150
- Product Information
- Product Usage Instructions
- Model
- Safety Notes
- Installation Instructions
- Technical Data
- Assembly
- Maintenance
- Dimensions
- Spare parts
- Cleaning
- Operation
- Test certificate
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 74806000 Zesis M33 Lever Kitchen Faucet 150
Product Information
The provided text extract from the product user manual provides information on the product in multiple languages. It includes safety instructions, technical data, operating pressure, recommended operating pressure, test pressure, hot water temperature, rate of flow, thermal disinfection, maintenance, dimensions, spare parts, and color codes. The product is designed exclusively for drinking water and should not be used with silicone-containing acetic acid.
Product Usage Instructions
To use the product safely and effectively, follow the below usage instructions:
- Wear gloves during installation to prevent crushing and cutting injuries.
- For water heaters of 5 liters, the flow rate at the mixer should not exceed 5 l/min. In this case, the flow rate must be reduced at the isolation valve.
- Refer to the ‘Montage (see page 35)’ section for installation instructions.
- Ensure that the operating pressure does not exceed the maximum recommended pressure of 1 MPa or fall below the recommended operating pressure range of 0.1 – 0.5 MPa.
- Refer to the ‘Maintenance (see page 43)’ section for information on thermal disinfection and cleaning.
- Refer to the ‘Spare parts (see page 41)’ section for guidance on replacing parts.
Model
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- With water heaters of 5 liters the flow rate at the mixer should not exceed 5 l/min. In this case the flow rate must be reduced at the isolation valve.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Rate of flow: max. 5 l/min
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Assembly
Symbol Description
- Do not use silicone-containing acetic acid!
Maintenance
- The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
- When changing the spray former, it is imperative to use one made for this type of mixer.
Dimensions
Zesis M33 150 1jet
74806XXX
Spare parts
Zesis M33 150 1jet
74806XXX
- XXX = Colors
- 000 = Chrome Plated
- 670 = Matt Black
- 800 = Stainless Steel Optic
Cleaning
www.hansgrohe.com/cleaning-recommendation.
Operation
- Hansgrohe recommends not to use drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- When the storage tank is heated, the spout will drip.
Open
Close
Hot
Cold
Test certificate
Troubleshooting
Hansgrohe
Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax
+49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com.