INDIEGOGO AbsolutSweat Real-Time Sweat Fitness Tracker Instruction Manual
- June 12, 2024
- INDIEGOGO
Table of Contents
NDIEGOGO AbsolutSweat Real-Time Sweat Fitness Tracker
Product Information
- The product complies with part 15 of the FCC Rules.
- The device can be used in portable exposure conditions without restriction.
Product Usage Instructions
- Ensure that the device is used in compliance with part 15 of the FCC Rules.
- Do not use the device in a manner that may cause harmful interference.
- The device can be used in portable exposure condition without restriction.
- Do not make changes or modifications to the device that are not expressly approved by the party responsible for compliance.
- Unauthorized changes or modifications to the device could void the user’s authority to operate the equipment.
A professional personal coach brings you closer to improved performance,
scientific fat loss, water and electrolytes balance for every workout.
At the same time, AbsolutSweat is a non-invasive,wearable device designed to
track your body ‘ unique physiological behaviors like stamina, fatigue
calorie. with the first sensor of its kind designed to capture your sweat data
every one time or seven times workout, for example: sodium , potassium ,
glucose, and so on.
Product Colours
Usage Instructions
STEP 1. ACTIVATE THE PRODUCT
Place the sweat tracker in the charging case with the logo “AbsolutSweat”
facing upward. If the light of the tracker on for 5s and then turns off, the
activation is successful.
STEP 2. PAIR THE TRACKER WITH APP
three ways to pair your device as above
STEP 3. INSTALL THE SWEAT PATCH UNIT
Press the sweat patch unit into the upper cover of the charging case, and turn
the tracker 180 with the logo “AbsolutSweat* facing down
STEP 4. COMBINE THE TRACKER WITH A PATCH
Remove the protective film on the patch, then turn the middle carrier to fit
the upper cover tightly, and finally press down the tracker and hold the
pressure for 5 seconds.
STEP 5. ATTACH THE COMBINATION OF TRACKER AND
PATCH TO THE BODY (e.g. chest, back, forehead, arm, leg) Make sure the surface
of the skin is dry and free of sweat, then pull the combination out from one
end, Remove the back protective film.
STEP 6. START A WORKOUT AND TRACKING
Click “Start On the homepage of App and the tracker will accompany you to
Color of Light Means
Green: Normal
White: Abnormal (For example, Charge less than 20% or Critical Alerts in
Workout)
Action of Light Means
- Stays On: Under Tracking
- Be On 3s and then off: Feedback of Operation
- Strobing: On the charge
LIST OF ITEMS
- Sweat-tracker: x1
- Charging Case: x1
- Disposable Sweat-patch: ×12
- USB-C charging cable: x1
- Instruction Book: x1
FCC STATEMENT
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class
B digital device,pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit to different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Labeling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.